_______________ is a text-based platform that allows users to respond to visual prompts by entering single commands into the interface and receiving a response in the same manner.

This will alter the name of the device that is displayed when you connect to the router/switch

This command is to change the name of the network device

This password protection to restrict access to the CLI of your router

This command is use to secure the access to console port to the CLI

This command is use to secure the access to auxiliary port to the CLI

This command is use to secure the access to vty 0 4 port to the CLI

This command is use to secure the privileged mode in plain text

This command is use to secure the privileged mode but is it is encrypted

It encrypts all current passwords and also the future plaintext passwords

_________________ displays the summarized status of all interfaces

The IT staff checks the summarized status of interfaces using show ip interface brief, the FastEthernet0/4 is in Administratively down. What is the meaning when the status is Administratively Down and the Line Protocol is also Down?

____________ is the tool to test the network connectivity

_____________ is a type of subnetwork that can group together collections of devices from various physical Local Area Networks (LAN).

________________ is a group of computers and devices that share a communications line or wireless link to a server in the same geographic area.

What is the default vlan in Cisco switches?

Select the right command to turn a switch port into an access port

Command to assign an access port into vlan 9

You cannot use VLAN 0 in production vlans

Select the range of vlans you can use, create and delete in a Cisco switch

You cannot delete vlans 1002 - 1005

Where are VLAN configurations being saved in a switch?

What command you can use to verify your VLAN and displays the name, status, and associated ports?

_______________ is a Cisco proprietary protocol that negotiates if links will trunk and what type of trunking encapsulation will be used

Which protocol supports sharing the VLAN configuration between two or more switches?

Which VTP mode can not make a change to vlan?

To configure the VLAN trunking protocol to communicate VLAN information between two switches, what requirement must be met?

VTP server can add, rename and delete vlans.

What vtp mode will only forward vlan updates and doesn't care about them?

VTP is a Cisco proprietary protocol

Encapsulation used to tag VLAN traffic in a connected trunk port?

Cisco switches support two (2) trunking protocols that tag each frame with the VLAN ID: IEEE 802.1Q and __________________

_________________ contains a large number of commands

The Network Engineer checks the summarized status of interfaces using show ip interface brief, the FastEthernet0/6 is in Up status but it didn’t work. What is the meaning when the status is Up and the Line Protocol is Down?

This table is stored in the router’s RAM instead of the FLASH memory. This allows the router to access the routing table quickly.

_______________ are automatically placed in the router's RAM (Routing Table)

______________ are configured manually in the router's RAM (Routing Table)

___________________ command determines the path taken by the source IP to reach the destination IP.

In this type of route, the routers will send information to other routers on how to reach a particular network.

You want to encrypt the privileged mode password for enhanced security. Which command should you use to achieve this?

You need to set a password to restrict access to the console port of the router. Which command should you use to enter to the line configuration?

You are dealing with network performance issues caused by large broadcast domains. What solution can you implement to address this problem and increase the number of broadcast domains?

You need to create a VLAN with the name "MTExam" on a switch. Which commands should you use to achieve this?

You want to verify the VLAN configuration on a switch, including the VLAN name, status, and associated ports. What command should you use for this purpose?

You are configuring trunking on a Cisco switch to enable communication between multiple VLANs. What command should you use to configure a trunk port manually?

You are working on a network and want to verify the trunking status of all interfaces. What command should you use to display information about all the trunk interfaces on a Cisco switch?

You need to manually configure a static route on a router to reach the destination network 192.168.7.0 with a subnet mask of 255.255.255.0. The first hop IP address to reach this network is 1.1.1.5. What command should you use to implement this static route?

You want to verify the static route configuration information on a router. Which command should you use to display this information?

You need to implement a static default route on a router to direct packets for networks not present in the routing table. What command should you use to configure this static default route with a next-hop IP address?