Can you identify the run-ons?

Risky environments occur when there is potential for injury, unsafe practices and the surrounding are considered hazardous or reliable. In a sporting and physical activity context, this can be due to a variety of factors such as: playing surface, isolation, water, unpredictability and equipment. A playing surface is the environment in which physical activity takes place. A playing surface can be dangerous or hazardous when the ground is uneven, wet/slippery and debris is present. This can be risky for participants as it can lead to severe injury and or death. An example of this is when physical activity or sport is called off due to wet weather. This puts participants at risk as its presents the possibility of the participants slipping over and cutting themselves or fracturing/breaking a bone. Isolation occurs when a person, people or event is held far away from first aid or a significant population, which can contribute to a risky environment. Acquiring an injury in an isolated location makes it difficult for help, and assistance may take longer to arrive, further putting yourself at risk. For example, bushwalking by yourself at night, the walker could slip and break an ankle. It may then take a while for aid to locate or reach you, further putting yourself at risk. Also, an isolated location makes it difficult to fully assess potential risks leading to an unsafe location for physical activity. With the example of the ultra- marathon, organisers were not able to fully assess the potential risk of bushfires leading to serious injury for their competition therefore isolation is a significant contributing factor to a risky environment. Water is a factor which influences risks in sport and physical activity. The lack of water can lead to dehydration and other health issues. On the other hand, the presence of water can result in slippery surfaces as well as altered or unknown conditions. This can be seen when an athlete takes part in a triathlon. Water is required to remain hydrated, however it can become hazardous. During the run and bike legs, water or rain can result in slippery surfaces and can therefore be dangerous for participants. In the swim leg, water depth and conditions can be unknown, rough or altered creating danger for participants. Evidently, water is an influential factor of the risks in physical activity and sport. Unpredictability will always play a role in sport and physical activity. Situations will never be completely foreseeable nor will risks be avoidable. The optimum risk identification processes cannot completely eliminate risks, simply reduce them. It is important for sporting associations to establish plans and processes not only to identify risk environments but to manage risks should unpredictable circumstances arise. Equipment is a factor that can contribute to a risky environment. If there is a lack of the correct and required equipment in physical activity, or if the equipment is ill-fitting or faulty, participants are then at risk of getting injured. For example, if a cricket player isn’t wearing a helmet and the cricket ball hits their head, they are at risk of serious head injury or death. Therefore, if proper and suitable equipment is available, participants can partake in physical activity safely without risk of injury.

Continental Drift Theory. From the discussion of the rock cycle, it has been pointed out that through Earth's external and internal processes. Earth's surface is constantly changing. However, this idea of a changing environment did not conform with the belief of earlier scientists. Rather, they thought that the geographic positions of ocean basins and continents have been static since the beginning of time. It was around the 1500s when Leonardo da Vinci, upon his discovery of fossil seashells found at the high mountains of Italy, first thought of the idea that the areas where mountains are located may have been oceans in the past. Through time, other fossils of marine organisms found far above the current sea level further supported the idea that mountains were uplifted and weathering wore them down. At around the 1800s, most scientists have accepted the idea that Earth's crust is undergoing large vertical movements or uplifting. There was also evidence of possible horizontal movements, but the scientists then were not convinced about it. Alfred Wegener showed evidence of horizontal or lateral movement of the continents in his continental drift theory. According to him, the continents have drifted around the world and have once formed a giant landmass or supercontinent called Pangaea. To support his theory, Alfred Wegener presented a set of geographical, biological, and climatic evidence.Wegener's geographical evidence included the jigsaw puzzle fit of the current continents. He pointed out that the coastlines of South America and Africa seem to fit together. He also pointed the presence of mountain ranges having similar rock types and age but separated by vast oceans, like that of the folded rocks of the Caledonian mountains. The same folded rocks run through West Africa, North America, Newfoundland, Ireland, Wales, Scotland, Greenland, and Norway, all of which are now separated by the Atlantic Ocean. A geographical evidence on the similar rock types in West Africa, North America, Greenland, and Europe is found. The biological evidence came in the discovery of similar plant and animal fossils in different continents separated by oceans. The animal fossils of Mesosaurus and Lystrosaurus indicate that they were not capable of crossing the oceans to reach the other continents. If they were, the fossils should have been more widely distributed Africa, Australia, India, and South America were too large to be carried by wind. This indicates that the areas where the fossils were found were closely linked. It has also been found out that the plant only grew in areas with subpolar climate, which would indicate that the landmasses were located near the South Pole.Lastly, for his climatic evidence, Wegener discovered that a glacial period occurred during the late Paleozoic era in Southern Africa, South America, Australia, and India. The initial explanation for this event was global cooling, but it was rejected because large tropical swamps with so much vegetation were found at the same time in the Northern Hemisphere. This further supported the idea that the supercontinent was indeed near the South Pole, and the continents in Northern Hemisphere were once near the equator. The glacial period also left glacial striations, or the scratches glaciers make as they move across on the underlying bedrock, on the aforementioned continents. For such an event to happen, the continents would have to be connected. SCIENCE PIONEER. Alfred Wegener (1880-1930). Alfred Wegener was a German polar researcher, geophysicist, and meteorologist. He was known for his work on the continental drift theory. In his effort to defend his work, he went to the Greenland ice sheet where he died.Even with all the compelling evidence, the continental drift theory hardly convinced the scientific community at that time because Wegener was unable to identify a credible mechanism that drives the continental drift. He was unable to clearly explain how the continents moved and how the larger continents broke through the ocean floor. Eventually, critics of the continental drift began to accept the theory when new evidence supporting the theory was discovered. The new evidence led to a more encompassing theory the theory of plate tectonics. This theory provided a more convincing explanation as to how the continents moved. The evidence that paved the way for the theory of plate tectonics was the idea of wandering poles. Scientists began studying volcanic rocks to determine the location of the magnetic poles. When volcanic rocks crystallize, the minerals with magnetic properties align themselves parallel to Earth's magnetic field at the time the minerals were formed. This finding allowed scientists to determine the polarity of Earth's magnetic field and the magnetic inclination that showed the location of the poles. Upon studying the paleomagnetism of the rocks, geophysicists found out that rocks from various locations point to different magnetic north poles, suggesting that the poles have wandered. Since movement of magnetic poles is very unlikely, scientists have accepted the idea that the continents are indeed moving. And if the continents are moving, scientists thought that maybe the ocean basins are moving too. They also discovered that some rocks showed magnetic reversals, which led them to believe that the magnetic north pole now was not always the magnetic north pole. Seafloor Spreading. After World War II, exploration on the ocean floor became the focus of many geologic studies. It was only then that the ocean ridge system was discovered. A geologist in Princeton University named Harry Hess, along with other scientists, studied this ocean ridge system and hypothesized that the oceanic crust was moving away from the ridge. His hypothesis, known as seafloor spreading, showed that the ocean floor is split along the ridge where the magma rises to form the new ocean floor.Because of this, rocks located near the ridge are younger than those that are located magnetic polarity of Earth is also preserved in those rocks. Withe ridge scientists were able to see the magnetic reversals in the ocean floor, and they were able to make use of information to determine that the ocean floor is moving at a rate of about 10 cm per year. Plate Tectonics. Confirmation of the seafloor spreading hypothesis proved that continents are not moving above the ocean floor. Rather, it is the fragments of the lithosphere. The lithosphere is the rigid layer that is composed of the uppermost mantle and the crust that carry the continents and the ocean basins along. These fragments of the lithosphere are called plates. Underneath the lithosphere is a weaker region in the mantle known as asthenosphere that behaves like a fluid. Thus, the lithosphere floats above the asthenosphere, making it detached and free to move. This became the basis of the theory of plate tectonics. Now that it has been made clear that it is the plates which are moving, the question as to how they move remained. Sir Arthur Holmes proposed the driving force for this plate movement in 1919. He suggested that the movement in the mantle carries the plates along. It was previously discussed that Earth's interior is very hot due to the heat produced by radioactive decay. Convection takes place in the mantle, keeping the asthenosphere hot and weak. The convection currents produced in the asthenosphere are the ones carrying the lithospheric plates and making them move. However, convection currents are not enough. Mechanisms such as ridge push and slab pull aid the convection currents to slowly move the lithospheric plates. Ridge push occurs at mid ocean ridges which are higher in elevation than the surrounding trenches and abyssal plains. The new ocean floor from the ridge is hot and relatively thin. As it moves away from the ridge, it cools down and gets denser, heavier, and thicker. Below this cooling ocean floor is the asthenosphere, which is less dense. This area becomes a massive shear zone and the new ocean floor will effectively slide down the slope of the asthenosphere. When the plate collides with another plate with lesser density, the denser plate sinks and a subduction zone is formed. When the subducting plate sinks, it pulls on the rest of the plate behind it. These mechanisms explain the movement of the plates.Earth has seven major lithospheric plates that account for 94% of Earth's surface. These are the North American Plate, South American Plate, Pacific Plate, African Plate, Eurasian Plate, Indo-Australian Plate, and Antarctic Plate. These plates are constantly moving relative to the other plates. Thus, the interaction of plates occurs mostly along the boundaries. These movements are plotted using information from earthquakes and volcanic activities. There are three main types of plate boundaries: convergent, divergent, and transform boundaries Convergent boundaries are boundaries where two plates move towards each other A convergent boundary is also known as destructive margin since this is where the collision between two plates occhins. There are three types of convergence-oceanic oceanic, oceanic-continental, and continental-continental. Trenches are features of the ocean floor that are present in both oceanic-oceanic boundary and oceanic-continental boundary. Subduction occurs at the trenches, therefore, these are characterized as the deepest parts of Earth. A divergent boundary is the opposite of convergent boundary: two plates move away from each other. Divergent boundaries create new crust; thus, they are also known as constructive margins. The ocean ridge system is a divergent boundary where new ocean floor is produced as magma rises, pushing the older rocks aside.Transform boundary is also known as conservative plate margin since two plates just move past one another, neither creating nor destroying land. Earthquake epicenters are usually detected at transform boundaries because the rocks tend to break and not fold or sink, like in convergent boundaries. Evolution of the Ocean Basins. Both the movement of the plates and seafloor are responsible for the evolution of ocean basins. Along the divergent boundary where ocean ridge systems are found, magma is released and new ocean floor is created. Along convergent boundaries, the ocean floor is being destroyed. The evolution of the ocean basins started during the time when Pangaea was still present and was surrounded by the vast ocean or superocean known as Panthalassa, also called Paleo-Pacific or "old Pacific." Upon the initial break up of Pangaea into Laurasia and Gondwanaland, the Tethys Sea began to form. Then, the Eurasian and North about, forming the North Atlantic. The South Atlantic only started to form when the African Plate and South American Plate separated. The continued movement of the plates created the Himalayas at one side and separated the Pacific Ocean and Atlantic Ocean at the other side, which consequently formed the current ocean basins. Both the movement of the plates and seafloor are responsible for the evolution of ocean basins. Along the divergent boundary where ocean ridge systems are found, magma is released and new ocean floor is created. Along convergent boundaries, the ocean floor is being destroyed. The evolution of the ocean basins started during the time when Pangaea was still present and was surrounded by the vast ocean or superocean known as Panthalassa, also called Paleo-Pacific or "old Pacific." Upon the initial break up of Pangaea into Laurasia and Gondwanaland, the Tethys Sea began to form. Then, the Eurasian and North about, forming the North Atlantic. The South Atlantic only started to form when the African Plate and South American Plate separated. The continued movement of the plates created the Himalayas at one side and separated the Pacific Ocean and Atlantic Ocean at the other side, which consequently formed the current ocean basins.Continents do not immediately end at the point where the ocean meets the land. They may extend slightly into the oceans. The portion of the continent that is submerged is called continental margin. There are two types of continental margin: passive margin and active margin. A passive continental margin consists of a continental shelf, continental slope, and continental rise. It is not associated with plate boundaries; thus, there are very little tectonic activities. An active continental margin only has a continental shelf and a continental slope. It is associated with plate boundaries; thus, a main feature of this boundary is a trench. The different features of a continental margin are the following: 1. The continental shelf is the gently-sloping submerged portion of the continent. 2. The continental slope is the steep slope after the continental shelf. It is still part of the continent. 3. The continental rise is the gently-sloping area after the continental slope and before the ocean floor. 4. The trenches are the deepest parts of the ocean. These are narrow depressions caused by the subduction of the ocean floor along the convergent boundaries. 5. The mid-oceanic ridge is the mountain range system in the ocean. It is responsible for the production of new ocean floor. This is the region where new magma constantly emerges from. SCIENCE CAREER. A scientific illustrator uses art to inform and communicate complex details and concepts of science. He/She makes use of scientifically informed observations and research along with his/her technical art and aesthetic skills to make accurate representations. In Natural History, the scientific illustrators recreate how the extinct species look like by working with scientists and fossil records. Moreover, with the advances in technology, illustrators are now into 3D modelling, animation, and video making. Earth's History. All the processes that have been discussed require long periods of time to create a noticeable change on Earth's surface. You can just imagine how long it would take to create an oceanas vast as the Pacific Ocean if the ocean floor moves only at about 10 cm/year. It is then important to know the history of Earth to learn the complexities of its past and be able to use it to understand the present. Just like learning the history of a country that requires one to read a lot of books, learning the history of Earth involves studying a lot of rocks. Rocks, especially sedimentary rocks, contain a lot of information about Earth's past. It holds the key to most of the geologic processes that happened on Earth and the key to uncovering how life on Earth evolved. But these discoveries are worthless if there is no time perspective. Thus, one of the most important contributions of geologists to mankind is the geologic time scale, which holds a history that is exceedingly long.

Revealing personal data can lead to threats like identity theft, fraud, bullying, and blackmail. 1.Identity Theft Definition: Identity theft occurs when someone steals your personal information and uses it without your permission. This can include your name, Social Security number, or bank details. Example: If someone gets your Social Security number, they could open a credit card in your name and run up bills that you would have to pay. 2.Fraud Definition: Fraud is when someone deceives another person to gain something of value, like money or personal information. This is often done through lies or tricks. Example: A person might call you pretending to be from your bank and tell you that you need to confirm your account details. If you give them your information, they may steal your money. 3. Bullying Definition: Bullying is when someone repeatedly hurts, threatens, or picks on another person. This can happen in person or online (cyberbullying). Example: If someone sends hurtful messages or spreads rumors about you on social media, that’s a form of bullying. 4. Blackmail Definition: Blackmail is when someone threatens to reveal harmful or embarrassing information about you unless you give them something they want, usually money or favors. Example: If someone takes a private photo of you and threatens to share it unless you pay them, that’s blackmail. Summary Identity Theft: Stealing personal information for illegal use. Fraud: Deceiving someone for personal gain. Bullying: Repeatedly hurting or threatening someone. Blackmail: Threatening to expose information unless demands are met. Understanding these terms helps you recognize and protect yourself from potential dangers in both real life and online. If you see any signs of these actions happening, it’s important to talk to a trusted adult or authority figure. There are several guidelines for you to be aware of to keep your personal data confidential: •Have strong passwords set on any account that holds personal data. Stronger passwords include characters, numbers and symbols and are not a recognisable word. •Encrypt (scramble text so that it cannot be read without a decryption key) any personal data that you store on your computer. •Have a firewall present, scanning incoming and outgoing data from your computer system. firewall : a security measure that can be implemented to monitor traffic into and out of a computer and prevent external users gaining unauthorised access to a computer system. A firewall is a security measure that helps protect a computer system by monitoring and controlling the traffic that comes into and goes out of the system. Think of it as a barrier between your computer and the outside world. It prevents unauthorized users from accessing your computer while allowing authorized traffic to pass through. •Regularly scan your computer with preventative software, such as an anti-virus package, that is used to identify a virus on a computer and remove it. Anti-virus: software that is used to identify a virus on a computer and remove it •Make use of any biometric devices (devices that measures a person's biological data, such as thumbprints), that are built into technology. biometric devices: Unique physical characteristic of a person that can be used by a computer for identification purposes. https://www.aratek.co/news/biometric-devices-definition-and-examples Biometric devices are tools that use unique physical characteristics of a person for identification purposes. This means they can recognize who you are based on features that are unique to you. Here are some examples of biometric characteristics: Fingerprint Recognition, Facial Recognition, Voice Recognition •Only visit and provide data to websites that are a trusted source. •Do not open any email attachments from a sender you do not recognise. •Check the URL attached to any link requesting data to see if it is genuine. •Be cautious about any pictures or opinions that you post or send to people. •Remove data about your location that is normally attached to your photos and videos that you may post, such as geotags. Geotag: an electronic tag that assigns a geographical location A geotag is an electronic tag that assigns a specific geographical location to a piece of information, like a photo or a video. Geotags can help people understand where a photo was taken or where an event occurred, making it easier to organize and find information based on location. •Do not become friends on social networking sites with people you do not know. •Set all the privacy controls to the most secure setting that are available on social media accounts. •Report and block any suspicious user. •Use a nickname or pseudonym when using the internet for entertainment, for example, playing games. •If it is possible, use a virtual private network (VPN), an encrypted connection that can be used to send data more securely across a network. Virtual private network (VPN) : an encrypted connection that can be used to send data more securely across a network A Virtual Private Network (VPN) is a special way to connect to the internet that keeps your information safe. Imagine you are sending a secret message to a friend. You want to make sure no one else can read it while it travels. A VPN helps you do just that! It creates an encrypted connection, which means it turns your message into a code that only your friend can understand Example: Public Wi-Fi Safety: When you use public Wi-Fi, like in a café, your data can be easily accessed by hackers. If you connect to a VPN while using that public Wi-Fi, your data is encrypted, making it much harder for anyone to steal your information.

Recognize the Dangers Revealing personal data can lead to threats like identity theft, fraud, bullying, and blackmail. Example: If someone knows your bank details, they could steal your money. Task: Write down one way you could be harmed by sharing personal data. 1.Identity Theft Definition: Identity theft occurs when someone steals your personal information and uses it without your permission. This can include your name, Social Security number, or bank details. Example: If someone gets your Social Security number, they could open a credit card in your name and run up bills that you would have to pay.2.Fraud Definition: Fraud is when someone deceives another person to gain something of value, like money or personal information. This is often done through lies or tricks. Example: A person might call you pretending to be from your bank and tell you that you need to confirm your account details. If you give them your information, they may steal your money. 3. Bullying Definition: Bullying is when someone repeatedly hurts, threatens, or picks on another person. This can happen in person or online (cyberbullying). Example: If someone sends hurtful messages or spreads rumors about you on social media, that’s a form of bullying. 4. Blackmail Definition: Blackmail is when someone threatens to reveal harmful or embarrassing information about you unless you give them something they want, usually money or favors. Example: If someone takes a private photo of you and threatens to share it unless you pay them, that’s blackmail.

Can You Identify The Disney Movie From A Single Line Drawing?

Can you make multiple choice 2nd grade questions that cover the following: Demonstrate understanding of the ten-to-one relationships among ones, tens, and hundreds, using manipulatives. (a)  Write numerals, using a model or pictorial representation (i.e., a picture of base-10 blocks). (a)  Read three-digit numbers when shown a numeral, a model of the number, or a pictorial representation of the number. (a)  Identify and write the place (ones, tens, hundreds) of each digit in a three-digit numeral. (a)  Determine the value of each digit in a three-digit numeral (e.g., in 352, the 5 represents 5 tens and its value is 50). (a)  Use models to represent numbers in multiple ways, according to place value (e.g., 256 can be 1 hundred, 14 tens, and 16 ones, 25 tens and 6 ones, etc.). (a)  Use place value understanding to identify the number that is 10 more, 10 less, 100 more, or 100 less than a given number, up to 999. (b)  Compare two numbers between 0 and 999 represented with concrete objects, pictorially or symbolically, using the symbols (>, <, or =) and the words greater than, less than or equal to. (c)  Order three whole numbers between 0 and 999 represented with concrete objects, pictorially, or symbolically from least to greatest and greatest to least. (c)  Round two-digit numbers to the nearest ten. (d)?

Related quizzes

Related quizzes