Type 2, chemical tankers carrying in any tank, cargo not exceeding

A chemical additive to LPG (liquefied petroleum gas) gives it a characteristic

Enhanced Survey requirement of Res. 1049 (ESP Code), is carried out periodically by the

SOLAS, Chapter XI-1, Reg. 2 "Enhanced surveys", refer to

SOLAS, A Part-1, Reg. 3-2 "Corrosion prevention of seawater ballast tanks" refers to

SOLAS, Chapter XII, Reg 11 "Loading instrument" refers to the

SOLAS, Chapter XII, Reg 12 "Hold, ballast and dry space water level detectors", refer to

SOLAS, Chapter XII, Reg 13 "Availability of pumping systems", refer to

What regulates the SOLAS, Chapter XII.

Substantial corrosion means that the wear is

BLU Code requires a plan for loading/unloading (Loading/Unloading Plan)

The code for the safe loading and unloading of bulk carriers, BLU Code

The implementation of the "Loading/Unloading Plan" requires periodically determine the mass of the cargo

The Code for the safe loading and unloading of bulk carriers, BLU Code

IMO Code for the safe loading and unloading of bulk carriers (BLU Code) requires

International Maritime Solid Bulk Cargoes Code

The requirement for a "Solid bulk cargo density declaration" derives from the

The interval between sampling for transportable limit of humidity and the loading of the cargo which may liquefy must not exceed

Information on the moisture content of the cargo and the maximum allowable limit for maritime transport is derived from

What is the approximate content of oxygen in the atmosphere?

For the carriage of packaged dangerous goods which Code apply?

How much is the minimum concentration of oxygen at which, when decreasing is dangerous to enter or stay in a room without a breathing apparatus?

What is the main danger when entering indoors?

Non cohesive bulk cargoes with the "angle of repose" ≤ 30 ° are carried in accordance with the rules of

Non cohesive bulk cargoes are divided by "angle of repose" into

Carriage of goods from group "A" of the IMSBS Code with a moisture content of greater than "transportable moisture limit" is allowed in the

In respect of the carriage of coal, which of the following actions is applicable?

When loading bulk cargo on multi-deck ships tween decks covers are closed if

Owner's Inspection Report for damage to bulk carrier's cargo spaces is carried out according to the manual under

Bulk carriers, with short and long holds, are built so for

Upon inspection of  a bulk carrier a crack is spotted  in the main deck, long 32 cm and starting from the back corner of the hatch No 3, starboard. The most likely reason for this failure is

Document of Compliance is the ship's certificate required by

IGNITION TEMPERATURE is the temperature at which

In the IMDG Code the word "shall" means that the provisions concerned are

In the IMDG Code the word "should" means that the provisions concerned are

In a Document of compliance for carriage of dangerous cargo, the requirements of the IMO must be

Declaration of cargo (Cargo Declaration)

What is the legal status of the IMDG Code?

The code of the IMO for the transport of dangerous goods (IMDG Code) consists of

What name of dangerous cargo should be stated in the documents?

Volatile liquids are regarded as liquids with a flash point below

Oxidants are

Packaged dangerous goods are carried in accordance with the requirements of

For transportation of hazardous cargo (except class 1), when segregation is not required to the engine room.

For the transport of dangerous goods (DG) in the Cargo Transport Units (CTU), placement of labels for hazardous cargo is required

Flashpoint is called the temperature at which the liquid

GASES UNDER PRESSURE ARE A CLASS

Subsidiary Risk label of dangerous cargo acts as an extra and is

THE TRANSPORTED EXPLOSIVES ARE A CLASS

FLAMMABLE LIQUIDS ARE TRANSPORTED AS  CLASS3

FLAMMABLE SOLIDS ARE TRANSPORTED AS CLASS

CORROSIVE SUBSTANCES ARE TRANSPORTED AS CLASS

OXIDANTS ARE TRANSPORTED AS CLASS

POISONOUS SUBSTANCES ARE TRANSPORTED AS CLASS

RADIOACTIVE MATERIALS ARE TRANSPORTED AS CLASS

According to the IMDG Code a hazardous cargo have a special number on the classification of

The term Away from is used for segregation of dangerous goods in a cargo space and means

Goods of IMO Class 4

Goods of IMO Class 5.1 are

Goods of Class 6.1 are IMO

Goods of Class 6.2 are IMO

Goods of Class 7 are IMO

Goods of IMO Class 8 are

Goods of IMO Class 3 are 

Loads of Class3 IMO are divided into subclasses

TOXIC SUBSTANCES ARE

The expiry of the laboratory certificate of moisture content for bulk cargo in accordance with the IMSBC Code is

The goods in Group "B" of the IMSBC CODE are

The purpose of the trimming procedures according to the IMSBC Code is

Document of authorization is required by

The allowed conventional static heel, for the carriage of grain, as requirement of the IG Code is

Grain is transported in bulk by the requirements of the

Requirements of the IG Code for the carriage of grain in bulk refer to

Ship without "Document of authorization" on the requirements of the SOLAS Ch VI Part "C"

Ship's certificate, referred to as "Document of authorization" is required and refers to

The maximum heeling moment in "Grain Stability Booklet" in SOLAS ' 74 has dimension

Volume heeling moments in full hold with grain in bulk depend on the

A ship loaded with grain in bulk before departure must be

In the preparation of the cargo holds for loading grain in bulk bilge covers shall be covered with burlap to

For the carriage of grain in bulk minimum metacentric height is

For the carriage of grain in bulk the maximum allowable static inclining test is

For the carriage of grain in bulk the residual area on the Reed's diagram must be a minimum of

For the carriage of grain by ship without the "Document of authorization" saucer is used to

For the carriage of grain by ship without Document of authorization heeling moment of partially filled compartment is

According to the Grain Code in "Grain Stability Booklet" must have cross curves at 12⁰. This is in order

The term "angle of flooding" used in the code for the carriage of grain in bulk means

For grain in bulk If the grain is in partly filled compartment should the compartment be trimmed?

Assumed  angles on the  shifting of grain as requirements of the Grain Code IG for new ships is

Fixing the surface of grain in bulk with Sauser or Bundling

Requirements for Θst ≤ 12 º and remaining area on the Reed's diagram S ≥ 0.075 m. rad are demonstrated

Is the certification of a cargo plan obligatory in Bulgarian ports for goods listed in the IMSBC Code?