Which of the following safety rules of scaffolds are NOT true?

Which of the following safety rules of scaffolds are true?

What part of scaffold is fixed to support outriggers?

It is used to prevent lateral movements of the scaffold

What part of scaffold is known as the diagonal brace of the scaffold?

It is the skeletal structure of the scaffold

Which part of the scaffold is a horizontal plank/board found on top of the frame?

It is used to secure the fittings of the scaffold

Which part of the scaffold is an accessory used in fitting the parts of a scaffold?

Keep all equipment in good _____________.

Which type of scaffold frame used as sideways canopy to straddle objects and also comes with two locked-in stack pins?

It is a frame constructed with a climbing ladder on one side

Which scaffold has a standard pf 5' by 5' single ladder can also be a masonry scaffolding end frame?

Which of the following scaffolds has incorrect description?

Avoid using ___________ equipment

Plumb and level all ___________ as the erection proceeds

Do not force ___________ to fit

Level the scaffold until proper ___________ can be made easily

A raised floor is used to step on by workers while working

A part of the scaffold that holds the platforms

Which is used to prevent movements of the scaffold

It is used to support the structure 

Which hand tool used to turn nuts and bolts, and sometimes called adjustable wrench

Which tool is accurately used to test the squareness of smaller objects

These are hand coverings used for personal protection

A head covering used for personal protection

These are hand coverings used for personal protection

Feet protection used for personal safety; usually a type of shoe with steel toe

What refers to wide leather strap with hook used to protect an individual  from an accidental fall

Tie out strings can be used to secure ______ but should not be used to brace diagonal bars

In most cases, you will need assistance from another person to help you with both assembly and ______________.

Contact your local building or zoning department to see if there are any special requirements after a certain ____________

If a scaffolding will be of a substantial height, wear a _____ and harness for safety

Maintain all equipment in _______ condition

Which tool does not belong in assembling metal scaffold?

It is used to pull out fasteners

Arrange the following procedure below in order for us to get the first 4 step procedure in assembling metal scaffold.

1. Install 4 castors D into legs of frame A and pin with lock pins E

2. Attach side brace B to two frames A

3. Install platform C on side braces B so that the platform is fully seated within inner channel on top of side braces

4. Rotate the platform clips into engaged position

Arrange the following procedure below in order for us to get the first 4 step procedure in disassembling metal scaffold.

1. Unclip or unlock the top scaffolding bards. Remember, you are working in steps that are the reverse of assembly

2. Attach side brace B to two frames A. Unclip or pull off diagonal braces

3. Pull down the platform

4. Unlock the next set of vertical scaffolding

What will be needed to wear for safety if the scaffolding will be of a substantial height?