Chapter 3 Interactions in Ecosystems

Figure 18-11 represents the amount of energy stored as organic material in each trophic level in an ecosystem. The pyramid shape of the diagram indicates the low percentage of energy transfer from one level to the next. On average, 10 percent of the total energy consumed in one trophic level is incor- porated into the organisms in the next. Why is the percentage of energy transfer so low? One reason is that some of the organisms in a trophic level escape being eaten. They eventually die and become food for decomposers, but the energy contained in their bodies does not pass to a higher trophic level. Even when an organism is eaten, some of the molecules in its body will be in a form that the consumer cannot break down and use. For example, a cougar cannot extract energy from the antlers, hooves, and hair of a deer. Also, the energy used by prey for cellu- lar respiration cannot be used by predators to synthesize new bio- mass. Finally, no transformation or transfer of energy is 100 percent efficient. Every time energy is transformed, such as during the reactions of metabolism, some energy is lost as heat. Limitations of Trophic Levels The low rate of energy transfer between trophic levels explains why ecosystems rarely contain more than a few trophic levels. Because only about 10 percent of the energy available at one trophic level is transferred to the next trophic level, there is not enough energy in the top trophic level to support more levels. Organisms at the lowest trophic level are usually much more abundant than organisms at the highest level. In Africa, for exam- ple, you will see about 1,000 zebras, gazelles, and other herbivores for every lion or leopard you see, and there are far more grasses and shrubs than there are herbivores. Higher trophic levels con- tain less energy, so, they can support fewer individuals.A population is a group of organisms that belong to the same species and live in a particular place at the same time. All of the bass living in a pond during a certain period of time make up a pop- ulation because they are isolated in the pond and do not interact with bass living in other ponds. The boundaries of a population may be imposed by a feature of the environment, such as a lake shore, or they can be arbitrarily chosen to simplify a study of the population. The humans shown in Figure 19-1 are part of the pop- ulation of a city. The properties of populations differ from those of individuals. An individual may be born, it may reproduce, or it may die. A population study focuses on a population as a whole—how many individuals are born, how many die, and so on. Population Size A population’s size is the number of individuals that the population contains. Size is a fundamental and important population property but can be difficult to measure directly. If a population is small and composed of immobile organisms, such as plants, its size can be determined simply by counting individuals. Often, though, individ- uals are too abundant, too widespread, or too mobile to be counted easily, and scientists must estimate the number of individuals in the population. Suppose that a scientist wants to know how many oak trees live in a 10 km2 patch of forest. Instead of searching the entire patch of forest and counting all the oak trees, the scientist could count the trees in a smaller section of the forest, such as a 1 km2 area. The scientist could then use this value to estimate the population of the larger area. SECTION 1 OBJECTIVES ● Describe the main properties that scientists measure when they study populations. ● Compare the three general patterns of population dispersion. ● Identify the measurements used to describe changing populations. ● Compare the three general types of survivorship curves. VOCABULARY population population density dispersion birth rate death rate life expectancy age structure survivorship curve FIGURE 19-1 A population can be widely distributed, as Earth’s human population is, or confined to a small area, as species of fish in a lake are. Copyright © by Holt, Rinehart and Winston. All rights reserved. 382 CHAPTER 19 If the small patch contains 25 oaks, an area 10 times larger would likely contain 10 times as many oak trees. A similar kind of sampling technique might be used to estimate the size of the pop- ulation shown in Figure 19-2. To use this kind of estimate, the sci- entist must assume that the distribution of individuals in the entire population is the same as that in the sampled group. Estimates of population size are based on many such assumptions, so all esti- mates have the potential for error. Population Density Population density measures how crowded a population is. This measurement is always expressed as the number of individuals per unit of area or volume. For example, the population density of humans in the United States is about 30 people per square kilome- ter. Table 19-1 shows the population sizes and densities of humans in several countries in 2003. These estimates are calculated for the total land area. Some areas of a country may be sparsely popu- lated, while other areas are very densely populated. Dispersion A third population property is dispersion (di-SPUHR-zhuhn). Dispersion is the spatial distribution of individuals within the popu- lation. In a clumped distribution, individuals are clustered together. In a uniform distribution, individuals are separated by a fairly con- sistent distance. In a random distribution, each individual’s location is independent of the locations of other individuals in the popula- tion. Figure 19-3 illustrates the three possible patterns of dispersion. Clumped distributions often occur when resources such as food or living space are clumped. Clumped distributions may also occur because of a species’ social behavior, such as when animals gather into herds or flocks. Uniform distributions may result from social behavior in which individuals within the same habitat stay as far away from each other as possible. For example, a bird may locate its nest so as to maximize the distance from the nests of other birds. These migrating wildebeests in East Africa are too numerous and mobile to be counted. Scientists must use sampling methods at several locations to monitor changes in the population size of the animals. FIGURE 19-2 TABLE 19-1 Population Size and Density of Some Countries Population size Population density Country (in millions) (in individuals/km2) China 1,289 135 India 1,069 325 United States 292 30 Russia 146 8 Japan 128 337 Mexico 105 54 Kenya 32 54 Australia 20 3 dispersion from the Latin dis-, meaning “out,” and spargere, meaning “to scatter” Word Roots and Origins Copyright © by Holt, Rinehart and Winston. All rights reserved. POPULATIONS 383 The social interactions of birds called gannets, which are shown in Figure 19-3b, result in a uniform distribution. Each gannet chooses a small nesting area on the coast and defends it from other gannets. In this way, each gannet tries to maximize its distance from all of its neighbors, which causes a uniform distribution of individuals. Few populations are truly randomly dispersed. Rather, they show degrees of clumping or uniformity. The dispersion pattern of a population sometimes depends on the scale at which the popu- lation is observed. The gannets shown in Figure 19-3b are uni- formly distributed on a scale of a few meters. However, if the entire island on which the gannets live is observed, the distribution appears clumped because the birds live only near the shore. POPULATION DYNAMICS All populations are dynamic—they change in size and composition over time. To understand these changes, scientists must know more than the population’s size, density, and dispersion. One important measure is the birth rate, the number of births occur- ring in a period of time. In the United States, for example, there are about 4 million births per year. A second important measure is the death rate, or mortality rate, which is the number of deaths in a

CARBOHYDRATES Carbohydrates are organic compounds composed of carbon, hydrogen, and oxygen in a ratio of about one carbon atom to two hydrogen atoms to one oxygen atom. The number of carbon atoms in a carbohydrate varies. Some carbohydrates serve as a source of energy. Other carbohydrates are used as structural materials. Carbohydrates can exist as monosaccharides, disaccharides, or polysaccharides. Monosaccharides A monomer of a carbohydrate is called a monosaccharide (MAHN-oh-SAK-uh-RIED). A monosaccharide—or simple sugar— contains carbon, hydrogen, and oxygen in a ratio of 1:2:1. The gen- eral formula for a monosaccharide is written as (CH2O)n, where n is any whole number from 3 to 8. For example, a six-carbon mono- saccharide, (CH2O)6, would have the formula C6H12O6. The most common monosaccharides are glucose, fructose, and galactose, as shown in Figure 3-6. Glucose is a main source of energy for cells. Fructose is found in fruits and is the sweetest of the monosaccharides. Galactose is found in milk. Notice in Figure 3-6 that glucose, fructose, and galactose have the same molecular formula, C6H12O6, but differing structures. The different structures determine the slightly different properties of the three compounds. Compounds like these sugars, with a single chemical formula but different structural forms, are called isomers (IE-soh-muhrz). SECTION 2 OBJECTIVES ● Distinguish between monosaccharides, disaccharides, and polysaccharides. ● Explain the relationship between amino acids and protein structure. ● Describe the induced fit model of enzyme action. ● Compare the structure and function of each of the different types of lipids. ● Compare the nucleic acids DNA and RNA. VOCABULARY carbohydrate monosaccharide disaccharide polysaccharide protein amino acid peptide bond polypeptide enzyme substrate active site lipid fatty acid phospholipid wax steroid nucleic acid deoxyribonucleic acid (DNA) ribonucleic acid (RNA) nucleotide C HO H C H OH C OH H C CH2OH H C H OH O Glucose C OH C O H OH C OH H CH2OH C H CH2OH Fructose C H HO C OH H C OH H C CH2OH H C H OH O Galactose Glucose, fructose, and galactose have the same chemical formula, but their structural differences result in different properties among the three compounds. FIGURE 3-6 Copyright © by Holt, Rinehart and Winston. All rights reserved. 56 CHAPTER 3 Disaccharides and Polysaccharides In living things, two monosaccharides can combine in a condensa- tion reaction to form a double sugar, or disaccharide (die-SAK-e-RIED). For example in Figure 3-4, the monosaccharides fructose and glu- cose can combine to form the disaccharide sucrose. A polysaccharide is a complex molecule composed of three or more monosaccharides. Animals store glucose in the form of the polysaccharide glycogen. Glycogen consists of hundreds of glucose molecules strung together in a highly branched chain. Much of the glucose that comes from food is ultimately stored in your liver and muscles as glycogen and is ready to be used for quick energy. Plants store glucose molecules in the form of the polysaccha- ride starch. Starch molecules have two basic forms—highly branched chains that are similar to glycogen and long, coiled, unbranched chains. Plants also make a large polysaccharide called cellulose. Cellulose, which gives strength and rigidity to plant cells, makes up about 50 percent of wood. In a single cellu- lose molecule, thousands of glucose monomers are linked in long, straight chains. These chains tend to form hydrogen bonds with each other. The resulting structure is strong and can be broken down by hydrolysis only under certain conditions. PROTEINS Proteins are organic compounds composed mainly of carbon, hydrogen, oxygen, and nitrogen. Like most of the other biological macromolecules, proteins are formed from the linkage of monomers called amino acids. Hair and horns, as shown in Figure 3-7a, are made mostly of proteins, as are skin, muscles and many biological catalysts (enzymes). Amino Acids There are 20 different amino acids, and all share a basic structure. As Figure 3-7b shows, each amino acid contains a central carbon atom covalently bonded to four other atoms or functional groups. A single hydrogen atom, highlighted in blue in the illustration, bonds at one site. A carboxyl group, —COOH, highlighted in green, bonds at a second site. An amino group, —NH2, highlighted in yel- low, bonds at a third site. A side chain called the R group, high- lighted in red, bonds at the fourth site. The main difference among the different amino acids is in their R groups. The R group can be complex or it can be simple, such as the CH3 group shown in the amino acid alanine in Figure 3-7b. The differences among the amino acid R groups gives different proteins very different shapes. The different shapes allow pro- teins to carry out many different activities in living things. Amino acids are commonly shown in a simplified way such as balls, as shown in Figure 3-7c. (a) Many structures, such as hair and horns are made of proteins. (b) Proteins are made up of amino acids. Amino acids differ only in the type of R group (shown in red) they carry. Polar R groups can dissolve in water, but nonpolar R groups cannot. (c) Amino acids have complex structures, so, in this and other textbooks, they are often simplified into balls. FIGURE 3-7 (b) Alanine (an amino acid) (c) Simplified version of amino acid CH3 H N OH C C H O H (a) Copyright © by Holt, Rinehart and Winston. All rights reserved. BIOCHEMISTRY 57 H H N C C OH H O H CH3 H2O Glycine Alanine H N OH C C H O H H H N C C H O H CH3 N OH C C H O H (a) (b) (a) The peptide bond (shaded blue) that binds amino acids together to form a polypeptide results from a condensation reaction that produces water. (b) Poly- peptides are commonly shown as a string of balls in this textbook and elsewhere. Each ball represents an amino acid. FIGURE 3-8 Substrate Products Enzyme 1 2 3 In the induced fit model of enzyme action, the enzyme can attach only to a substrate (reactant) with a specific shape. The enzyme then changes and reduces the activation energy of the reaction so reactants can become products. The enzyme is unchanged and is available to be used again. 3 2 1 FIGURE 3-9 Dipeptides and Polypeptides Figure 3-8a shows how two amino acids bond to form a dipeptide (die-PEP-TIED). In this condensation reaction, the two amino acids form a covalent bond, called a peptide bond (shaded in blue in Figure 3-8a) and release a water molecule. Amino acids often form very long chains called polypeptides (PAHL-i-PEP-TIEDZ). Proteins are composed of one or more polypep- tides. Some proteins are very large molecules, containing hun- dreds of amino acids. Often, these long proteins are bent and folded upon themselves as a result of interactions—such as hydrogen bonding—between individual amino acids. Protein shape can also be influenced by conditions such as temperature and the type of solvent in which a protein is dissolved. For exam- ple, cooking an egg changes the shape of proteins in the egg white. The firm, opaque result is very different from the initial clear, runny material. Enzymes Enzymes—RNA or protein molecules that act as biological catalysts—are essential for the functioning of any cell. Many enzymes are proteins. Figure 3-9 shows an induced fit model of enzyme action. Enzyme reactions depend on a physical fit between the enzyme molecule and its specific substrate, the reactant being catalyzed. Notice that the enzyme has folds, or an active site, with a shape that allows the substrate to fit into the active site. An enzyme acts only on a specific substrate because only that substrate fits into its active site. The linkage of the enzyme and substrate causes a slight change in the enzyme’s shape. The change in the enzyme’s shape weakens some chemical bonds in the substrate, which is one way that enzymes reduce activation energy, the energy needed to start the reaction. After the reaction, the enzyme releases the products. Like any catalyst, the enzyme itself is unchanged, so it can be used many times. An enzyme may not work if its environment is changed. For example, change in temperature or pH can cause a change in the shape of the enzyme or the substrate. If such a change happens, the reaction that the enzyme would have catalyzed cannot occur.

CHARACTERISTICS OF LIFE The world is filled with familiar objects, such as tables, rocks, plants, pets, and automobiles. Which of these objects are living or were once living? What are the criteria for assigning something to the living world or the nonliving world? Biologists have established that living things share seven characteristics of life. These characteristics are organization and the presence of one or more cells, response to a stimulus (plural, stimuli), homeostasis, metabolism, growth and development, reproduction, and change through time. Organization and Cells Organization is the high degree of order within an organism’s internal and external parts and in its interactions with the living world. For example, compare an owl to a rock. The rock has a spe- cific shape, but that shape is usually irregular. Furthermore, differ- ent rocks, even rocks of the same type, are likely to have different shapes and sizes. In contrast, the owl is an amazingly organized individual, as shown in Figure 1-2. Owls of the same species have the same body parts arranged in nearly the same way and interact with the environment in the same way. Copyright © by Holt, Rinehart and Winston. All rights reserved. ORGANISM (Barn Owl) ORGAN (Owl’s Ear) TISSUE (Nervous Tissue Within the Ear) CELL (Nerve Cell) Every living organism has a level of organization. The different levels of organization for a complex multicellular organism, such as an owl, are shown in the figure below. FIGURE 1-2 THE SCIENCE OF LIFE 7 All living organisms, whether made up of one cell or many cells, have some degree of organization. A cell is the smallest unit that can perform all life’s processes. Some organisms, such as bacteria, are made up of one cell and are called unicellular (YOON-uh-SEL-yoo-luhr) organisms. Other organisms, such as humans or trees, are made up of multiple cells and are called multicellular (MUHL-ti-SEL-yoo-luhr) organisms. Complex multicellular organisms have the level of orga- nization shown in Figure 1-2. In the highest level, the organism is made up of organ systems, or groups of specialized parts that carry out a certain function in the organism. For example, an owl’s ner- vous system is made up of a brain, sense organs, nerve cells, and other parts that sense and respond to the owl’s surroundings. Organ systems are made up of organs. Organs are structures that carry out specialized jobs within an organ system. An owl’s ear is an organ that allows the owl to hear. All organs are made up of tissues. Tissues are groups of cells that have similar abilities and that allow the organ to function. For example, nervous tissue in the ear allows the ear to detect sound. Tissues are made up of cells. A cell must be covered by a membrane, contain all genetic information necessary for replication, and be able to carry out all cell functions. Within each cell are organelles. Organelles are tiny structures that carry out functions necessary for the cell to stay alive. Organelles contain biological molecules, the chemical compounds that provide physical structure and that bring about movement, energy use, and other cellular functions. All biological molecules are made up of atoms. Atoms are the simplest particle of an ele- ment that retains all the properties of a certain element. Response to Stimuli Another characteristic of life is that an organism can respond to a stimulus—a physical or chemical change in the internal or external environment. For example, an owl dilates its pupils to keep the level of light entering the eye constant. Organisms must be able to respond and react to changes in their environment to stay alive. ORGANELLE (Mitochondrion) BIOLOGICAL MOLECULE (Phospholipid) ATOM (Oxygen) cell from the Latin, cella meaning “small room,” or “hut” Word Roots and Origins www.scilinks.org Topic: Characteristics of Life Keyword: HM60257 mb06se_bios01.qxd 5/18/07 10:37 AM Page 7 8 CHAPTER 1 Homeostasis All living things, from single cells to entire organisms, have mecha- nisms that allow them to maintain stable internal conditions. Without these mechanisms, organisms can die. For example, a cell’s water content is closely controlled by the taking in or releas- ing of water. A cell that takes in too much water will rupture and die. A cell that doesn’t get enough water will also shrivel and die. Homeostasis (HOH-mee-OH-STAY-sis) is the maintenance of a stable level of internal conditions even though environmental conditions are constantly changing. Organisms have regulatory systems that maintain internal conditions, such as temperature, water content, and uptake of nutrients by the cell. In fact, multi- cellular organisms usually have more than one way of maintain- ing important aspects of their internal environment. For example, an owl’s temperature is maintained at about 40°C (104°F). To keep a constant temperature, an owl’s cells burn fuel to produce body heat. In addition, an owl’s feathers can fluff up in cold weather. In this way, they trap an insulating layer of air next to the bird’s body to maintain its body temperature. Metabolism Living organisms use energy to power all the life processes, such as repair, movement, and growth. This energy use depends on metabolism (muh-TAB-uh-LIZ-uhm). Metabolism is the sum of all the chemical reactions that take in and transform energy and materials from the environment. For example, plants, algae, and some bacteria use the sun’s energy to generate sugar molecules during a process called photosynthesis. Some organisms depend on obtaining food energy from other organisms. For instance, an owl’s metabolism allows the owl to extract and modify the chemi- cals trapped in its nightly prey and use them as energy to fuel activities and growth. Growth and Development All living things grow and increase in size. Some nonliving things, such as crystals or icicles, grow by accumulating more of the same material of which they are made. In contrast, the growth of living things results from the division and enlargement of cells. Cell division is the formation of two new cells from an existing cell, as shown in Figure 1-3. In unicellular organisms, the primary change that occurs following cell division is cell enlargement. In multi- cellular life, however, organisms mature through cell division, cell enlargement, and development. Development is the process by which an organism becomes a mature adult. Development involves cell division and cell differen- tiation, or specialization. As a result of development, an adult organism is composed of many cells specialized for different func- tions, such as carrying oxygen in the blood or hearing. In fact, the human body is composed of trillions of specialized cells, all of which originated from a single cell, the fertilized egg. This unicellular organism, Escherichia coli, inhabits the human intestines. E. coli reproduces by means of cell division, during which the original cell splits into two identical offspring cells. FIGURE 1-3 Observing Homeostasis Materials 500 mL beakers (3), wax pen, tap water, thermometer, ice, hot water, goldfish, small dip net, watch or clock with a second hand Procedure 1. Use a wax pen to label three 500 mL beakers as follows: 27°C (80°F), 20°C (68°F), 10°C (50°F). Put 250 mL of tap water in each beaker. Use hot water or ice to adjust the tem- perature of the water in each beaker to match the temperature on the label. 2. Put the goldfish in the beaker of 27°C water. Record the number of times the gills move in 1 minute. 3. Move the goldfish to the beaker of 20°C water. Repeat observations. Move the goldfish to the beaker of 10°C. Repeat observations. Analysis What happens to the rate at which gills move when the temp- erature changes? Why? How do gills help fish maintain homeostasis? Quick Lab mb06se_bios01.qxd 5/18/07 10:37 AM Page 8 THE SCIENCE OF LIFE 9 Reproduction All organisms produce new organisms like themselves in a process called reproduction. Reproduction, unlike other characteristics, is not essential to the survival of an individual organism. However, because no organism lives forever, reproduction is essential for the continuation of a species. Glass frogs, as shown in Figure 1-4, lay many eggs in their lifetime. However, only a few of the frogs’ off- spring reach adulthood and successfully reproduce. During reproduction, organisms transmit hereditary informa- tion to their offspring. Hereditary information is encoded in a large molecule called deoxyribonucleic acid, or DNA. A short segment of DNA that contains the instructions for a single trait of an organism is called a gene. DNA is like a large library. It contains all the books—genes—that the cell will ever need for making all the struc- tures and chemicals necessary for life. Hereditary information is transferred to offspring during two kinds of reproduction. In sexual reproduction, hereditary information recombines from two organisms of the same species. The resulting offspring are similar but not identical to their parents. For example, a male frog’s sperm can fertilize a female’s egg and form a single fer- tilized egg cell. The fertilized egg then develops into a new frog. In asexual reproduction, hereditary information from different organisms is not combined; thus the original organism and the new organism are genetically the same. A bacterium, for example, reproduces asexually when it splits into two identical cells. Change Through Time Although individual organisms experience many changes during their lifetime, their basic genetic characteristics do not change. However, populations of living organisms evolve or change through time. The ability of populations of organisms to change over time is important for survival in a changing world. This factor is also impor- tant in explaining the diversity of life-forms we see on Earth today.

Chapter 22 Antihypertensive Drugs Hypertension Defined (JNC-8) Pharmacology Overview 7 main categories of drugs to treat HTN Adrenergic drugs (old friend) Angiotensin-converting enzyme (ACE) inhibitors Angiotensin II receptor blockers (ARBs) Calcium channel blockers (CCBs) Diuretics Vasodilators Direct renin inhibitors A. Adrenergic Drugs: 5 Subcategories and where they act A1. Adrenergic neuron blockers (central and peripheral)- we won’t talk about this A2. Alpha1 receptor blockers (peripheral) A3. Alpha2 receptor agonists (central) A4. Beta receptor blockers (peripheral) A5. Combined α and β receptor blockers (peripheral) A2. Peripherally Acting Adrenergic DrugAlpha1 Blockers (we’ve met these) Doxazosin, prazosin, alfuzosin Block alpha1-receptors which causes BP to decrease Reduces peripheral vascular resistance and BP by dilating both arterial and venous blood vessels Main Use: benign prostatic hyperplasia (BPH) Alpha1 Blockers REMEMBER Tamsulosin (Flomax)* is an α1 blocker BUT *Tamsulosin is not used to control BP, just for BPH. A3. Centrally Acting Adrenergic DrugsAlpha 2 agonist Clonidine and methyldopa 1- Stimulate alpha2-adrenergic receptors. in the brain Decreases sympathetic outflow from the CNS which decreases NE production 2. Stimulate alpha2-adrenergic receptors in kidneys remember alpha 2 opposes alpha 1 Dilates peripheral blood vessels → lowers peripheral resistance → Results in decreased BP So ….Clonidine (Catapres) Used primarily for its ability to decrease blood pressure in an urgent setting Also use in opioid withdrawal as previously discussed Oral (multiple times a day), and topical patch formulations Do not stop abruptly as it may lead to rebound hypertension In reality, Clonidine and methyldopa Not prescribed as first-line home antiHTN drugs High incidence of unwanted adverse effects: orthostatic hypotension, fatigue, and dizziness MIGHT be uses as adjunct drugs after other drugs have failed, in conjunction with other antiHTN such as diuretics A4. Adrenergic Drugs Selective Beta 1 Blockers Metoprolol, Atenolol Reduction of HR through β1 receptor blockade (remember adrenergic blocking of this receptor???) HR results in BP Cause reduced secretion of renin = BP A4. Adrenergic Drugs Selective Beta1 Blockers Nebivolol (Bystolic) Uses: hypertension and HF Action: blocks β1 receptors and produces vasodilatation, which results in a decrease in SVR High doses loses selectivity and blocks both β1 and β2 Less sexual dysfunction All BB- Do not stop abruptly; must be tapered over 1 to 2 weeks A4. Adrenergic Drugs NONSelective Beta Blockers Propranolol Acts equally on β1 and β2 Other uses include situational anxiety associated with public speaking, test taking As mentioned on previous slide, nebivolol at high doses becomes beta nonselective A5. Dual-Action Adrenergic Drugs α1 and β Receptor Blockers Dual antihypertensive effects of reduction in heart rate (beta1 receptor blockade) and vasodilation (alpha1 receptor blockade) Examples are carvedilol (common) and labetalol (not as common) A5. Dual-Action Adrenergic Drugs α1 and β Receptor Blockers Carvedilol (Coreg) Widely used drug that is well tolerated Uses: HTN, mild to moderate HF in conjunction with digoxin, diuretics, and ACE inhibitors Contraindications: severe bradycardia or unstable HF, bronchospastic conditions such as asthma, and various cardiac conduction problems Adrenergic Drugs Indications - HTN But also for Glaucoma (topical) BPH: doxazosin, prazosin, and terazosin (2 for 1) Management of severe HF when used with cardiac glycosides and diuretics Contraindications Acute HF- have to stabilize first MOAIs- yeah doesn’t everything interact with MAOIs? Peptic ulcers Severe liver/kidney disease Asthma (with beta blockers) Adrenergic Drugs: Adverse Effects Orthostatic hypotension 1st-dose syncope Rebound hypertension with abrupt discontinuation Most common: Dry mouth, drowsiness, constipation, sedation Interactions- always check for specific drug interactions Can cause additive CNS depression with alcohol, benzodiazepines, opioids Question #1 When administering an alpha-adrenergic drug for hypertension, it is most important for the nurse to assess the patient for the development of what response? Hypotension Hyperkalemia Oliguria Respiratory distress Answer A Hypotension This is a key point in patient education These drugs have strong vasodilating properties and may cause severe hypotension, especially at the beginning of therapy. B. Angiotensin-Converting Enzyme Inhibitorsaka ACE Inhibitors or ACEi Large group of safe and effective drugs Currently are 10 ACEi Often used as first-line drugs for HF and hypertension May be combined with a thiazide diuretic, loop diuretic, or Calcium Channel Blocker (CCB) You need to understand the basics ACE Inhibitors: Review RAAS ACE converts angiotensin I, formed through the action of renin, to angiotensin II Angiotensin 2 is a potent vasoconstrictor and also induces aldosterone secretion by the adrenal glands Aldosterone stimulates sodium resorption (H20 follows Na Both act to raise BP which causes kidneys to reduce renin production ACEi= Great drug to treat HTN BUT contraindicated in pregnancy (2nd,3rd trimester due to fetal renal damage) and breastfeeding first few weeks after birth B. ACE Inhibitors - PRIL Lisinopril (Prinivil) super common, often the 1st drug Enalapril (Vasotec) also common Captopril (Capoten) great if liver disease present Benazepril (Lotensin) Fosinopril (Monopril) Perindopril (Aceon) Quinapril (Accupril) Ramipril (Altace) Trandolapril (Mavik) Primary Effects of the ACE Inhibitors Prevent Na (and H2O) resorption by inhibiting aldosterone secretion (volume reduction) (GO BACK TO RAAS DIAGRAM) blood volume decreases work of the heart preload, or the left ventricular end-diastolic volume which is important in HF ACE SUMMARY OF ACTIVITY 1) Prevent vasoconstriction caused by angiotensin 2 (2) Prevent aldosterone secretion  less sodium and water resorption Cardioprotective Effects of ACEi They slow progression of left ventricular hypertrophy (ventricular remodeling) after MI so considered cardioprotective ACE inhibitors have been shown to decrease morbidity and mortality in patients with HF Renal Protective Effects of ACEi ACE inhibitors: reduce glomerular filtration pressure by volume reduction Cardiovascular drug of choice for patients with diabetes since it helps protect kidneys by reducing pressure. Sometimes used low dose for kidney protection with DM without HTN B. ACEi Enalapril (Vasotec) Only ACEi available in both oral and IV Enalapril IV does not require cardiac monitoring Oral enalapril: prodrug (metabolized in liver) Improves patient’s chances of survival after an MI Reduces the incidence of HF B. ACEi Captopril (Capoten) Uses: prevention of ventricular remodeling after MI; reduce the risk of HF after MI Shortest half-life Must be administered multiple times throughout the day so this limits its use Not a prodrug so good for patient with liver disease Question #2 A patient with diabetes has a new prescription for the ACE inhibitor lisinopril. She questions this order because her provider has never told her that she has hypertension. What is the best explanation for this order? The doctor knows best The patient is confused This medication has cardioprotective properties This medication has a protective effect on the kidneys for patients with diabetes Answer D ACE inhibitors have been shown to have a protective effect on the kidneys because they reduce glomerular filtration pressure. This property makes them the cardiovascular drug of choice for patients with diabetes. Question #3 A patient with a history of pancreatitis and cirrhosis is also being treated for hypertension. Which drug will most likely be ordered for this patient? Clonidine Prazosin Diltiazem Captopril Answer D Captopril Captopril is not a prodrug; therefore, it does not need to be metabolized by the liver to be effective. This is an advantage in patients with liver disease. ACE Inhibitors: Adverse Effects *Dry, nonproductive cough, which reverses when therapy is stopped. This is a class effect Dizziness- Note: First-dose hypotensive effect may occur Headache & Fatigue Possible hyperkalemia ** Angioedema: rare but potentially fatal Not safe in pregnancy-are contraindicated during the second and third trimesters of pregnancy because of increased risk of fetal renal damage C. Angiotensin II Receptor Blockers(ARB) Considered an alternative to ACEi Less likely to cause a dry cough and hyper K+ that is common with ACE inhibitors Angiotensin II Receptor Blockers: Mechanism of Action Go back to RAAS diagram! ARBs affect primarily 2 places 1. Vascular smooth muscle - blocks vasoconstriction 2. Adrenal gland -Selectively blocks the binding of Ang 2 to certain Ang 2 receptors inhibiting secretion of aldosterone Lowers volume retention and BP Angiotensin II Receptor Blockers -ARTAN Losartan (Cozaar)- very common Eprosartan (Teveten) Valsartan (Diovan) Irbesartan (Avapro) Candesartan (Atacand) Olmesartan (Benicar) Telmisartan (Micardis) Azilsartan (Edarbi) C. ARB Losartan (Cozaar) Beneficial in patients with HTN and HF Used with caution in patients with kidney or liver dysfunction and in patients with renal artery stenosis ***Not safe for breastfeeding women and should not be used in pregnancy (Cat C 1st trimester, Cat D 2nd-3rd trimester), potential fetal toxicity Appear to be equally effective for the treatment of hypertension and well tolerated ARBs less likely to cause cough and hyperK+ but can still happen Evidence that ARBs are associated with lower mortality after MI than ACE inhibitors Never take ACEi and ARBs at the same time* 5. Calcium Channel Blockers (CCB) Primary use: HTN, angina, some dysrhythmias Cause smooth muscle relaxation by blocking the binding of calcium to its receptors, preventing muscle contraction Results in: Relaxed blood vessels to the heart Decreased peripheral smooth muscle tone Decreased SVResistance Decreased BP E. Diuretics First-line antiHTN in JNC 8 guidelines Decreases fluid volume The results from diuresis: preload, Peripheral resistance Overall effect  Decreased workload of the heart and decreased BP Thiazide diuretics are the most commonly used diuretics for HTN Ie hydrochlorothiazide (HCTZ), chlorthalidone We will discuss diuretics further in the chapter on diuretics F. Vasodilators Directly relax arterial or venous smooth muscle (or both) Results in: Decreased SVR Decreased afterload Peripheral vasodilation Indicated for treatment of HTN May be used in combination with other drugs F. Vasodilators Hydralazine (Apresoline) Orally: routine cases of essential hypertension Injectable: hypertensive emergencies BiDil: specifically indicated as an adjunct for treatment of HF in African-American patients F. Vasodilators Sodium Nitroprusside (Nitropress) *Sodium nitroprusside and IV diazoxide are reserved for the management of hypertensive emergencies. Contraindications: severe HF, known inadequate cerebral perfusion (especially during neurosurgical procedures) F. Vasodilators Adverse Effects Hydralazine: dizziness, headache, tachycardia, edema, dyspnea, N/V/D, vitamin B6 deficiency, rash Sodium nitroprusside: hypotension, bradycardia, decreased platelet aggregation, rash G. Direct Renin Inhibitors Aliskirin (Tekturna) Blocks the RAS pathway at the point of activation. Inhibiting renin production prevents the downstream production of Ang II (potent vasoconstrictor) Adverse effects: N/V, severe hypotension, hyponatremia, hyperkalemia… Contraindicated in patients with DM taking ACEi or ARB Miscellaneous Antihypertensives Eplerenone (Inspra) Newer class of drugs called selective aldosterone blockers (remember RAAS?) Reduces BP by blocking the actions of aldosterone at its corresponding receptors in the kidney, heart, blood vessels, and brain Indications: routine treatment of hypertension and for post-MI HF Contraindicated if serum potassium levels are high (above 5.6 mEq/L) A Special Form of HTNTreatment of Pulmonary Hypertension Sildenafil and Tadalafil Commonly used for erectile dysfunction Used for pulmonary hypertension but with different trade names Sildenafil: Revatio* (Viagra for ED) Tadalafil: Adcirca* (Cialis for ED)

Electrostatics The section of CBSE Class 12 Physics electrostatic potential and capacitance notes mainly deals with the in-depth analysis of electromagnetic phenomena when they are not performing any movements. Additionally, it is divided into ten further sub-topics to study the companion processes of reaching the state. These are - 1. Electric charge In this section of Physics ch 2 Class 12 notes, you get to learn about the basic features of electric charge and its expression in Physics. Along with its basics, the sections help to understand the full potential of charge. Different aspects of Charge included in Class 12 Physics Chapter 2 notes are - Definition Type: Positive and Negative Charge Unit and dimensional formula Point Charge Properties of Charge Comparison of Charge and Mass Methods of Charging Electroscope 2. Coulomb's Law Force is created when charges of opposite signs attract each other, and they repulse if the signs are the same. Coulomb's law tries to define this phenomenon through a mathematical formula, explicitly mentioned in Physics Class 12 notes Chapter 2. Moreover, there is key information about the variation of the constant k and its effect on a medium. Coulomb's law's vector form and the principle of superimposition are also explained in ch 2 Physics Class 12 notes. (Image will be uploaded soon) 3. Electric Field As stated in Class 12 Physics Chapter 2 notes, every positively or negatively charged particle has their respective electric fields. It feels a force at the time of interaction which might be attraction or repulsion. As it arises from electric charge, it is crucial to know about its different parts like - Electric field intensity Relation between electric force and electric field Super imposition of electric field Point charge Continuous charge distributions Properties of Electric Field Lines Motion of Charged Particles in an Electric field Learning more about the electric field from electric potential and capacitance notes Class 12 helps a student to get a grasp of upcoming chapters. 4. Electric Potential Energy When energy helps a charge to move from an electric field, it is known as the Electric Potential Energy. This section of electrostatic chapter Class 12 notes requires a student to study the Electron volt (eV), and the potential energy that an n number of charges can hold. 5. Electric Potential This section of Class 12 Physics Chapter 2 notes focuses on in-depth learning of Electric Potential or Voltage. Basically, it defines the potential movement of energy. 6. Relation between Electric Field and Potential Apart from knowing more about the relationship between the two values, Physics Class 12 Chapter 2 notes also discuss equipotential surfaces. 7. Electric Dipole Essentially, 'Dipoles' are two opposite points of charge represented with q and –q, with their distance between each other being 2a. Electric Dipoles are crucial in your study of Physics Class 12 Chapter 2 notes to learn more about electric fields and their potential. Additionally, Class 12 Physics Chapter 2 notes focus on the influence of electric dipoles on a uniform electric field mainly through Force and Torque, Work, and Potential Energy. In the last part of Electrostatics, further focus is on using the formulas to their fullest potential. It includes subsections of Electric Field, Electric Potential Energy, Electric Potential, and Electric Dipole. In the notes for electrostatic potential and capacitance, you will find proper solutions accompanied by clear and crisp diagrams for better understanding. 8. Gauss's Law Apart from just discussing the Gauss's Law, in Physics Class 12 ch 2 notes there is a thorough explanation of its properties and applications. The Gauss' Law states that net electric flux passing through a hypothetical closed surface is equal to the net electric charge present within the same closed surface. Being a broad part of the whole chapter, you may need to spend a little more time on it. Moving forward, it starts discussing the properties of conductors in relation to Gauss's Law. The Class 12 Physics notes Chapter 2 perfectly defines the journey to Gauss' Law from Coulomb's Law. Here is the Gauss's Law present in the Class 12 Physics ch 2 notes, (image will be uploaded soon) 9. Capacitors There is a dedicated section about Capacitors in the Class 12 Physics Chapter 2 notes elucidating its functions and importance as storage of potential electric energy. After explaining the structure of a capacitor, it points out the different types, parallel plate, spherical and cylindrical. The section of Chapter 2 notes of Physics Class 12 is further divided into subheads like: Properties of an ideal battery Grouping of capacitors Simple circuits (Series and Parallel) Dielectric Van de Graaff generator Combination of drops Charge distribution method Wheatstone Bridge-based circuit Extended Wheatstone Bridge Infinite network of capacitors Redistribution of charge between two capacitors Vedantu prepares the Class 12 Physics Chapter 2 notes with help from subject matter experts. In the PDF, you get a comprehensive idea of the topic along with potential answers to the most asked questions. Furthermore, the detailed explanation on each section and subsections are written in a simple language allows a student to ace their exams with wholesome knowledge. These Physics Chapter 2 Class 12 notes are going to be one of the best supplementary study materials besides a student’s textbooks. Visit the Vedantu website or download the app to get your hands on all important notes! Important Questions A charge of 4 × 10–8C is uniformly distributed on the surface of a spherical conductor, having a radius of 15 cm. Determine the electric field just outside this sphere at a point that is 15 cm from the centre of this sphere. Determine the capacitance given that the distance between the two plates has been reduced by half and the parallel plate capacitor holds a capacitance of 20 pF (where 1pF = 10-12 F) having air between the two plates. What will be the total capacitance of a combination where three capacitors, each having a capacitance of 20 pF, are connected in series. A square having a side of 10 cm has a 500 µC charge at its centre. Determine the work done to move a charge of 10 µC between two points that are diagonally opposite each other on the square. At an equatorial point, what will be the electrostatic potential because of an electric dipole? Calculate the work done to move a test charge, q, through a length of 1 cm along the equatorial axis of an electric dipole? Polarisation A capacitor has its plates enclosed in a medium that can be filled by insulating substances. A net dipole moment is then induced by an electric field in the dielectric. This event causes the field in an opposite direction. Equipotential Surface An equipotential surface is a type of surface where the potential always has a constant value. If considered as a point charge, the concentric spheres that are centred at a particular area of this charge are basically equipotential surfaces. Advantages of Vedantu's Revision Notes: A Comprehensive Resource for Effective Learning There are several reasons why one may refer to Vedantu's revision notes for studying a subject like Electrostatic Potential and Capacitance. Here are some key points: Comprehensive Coverage: Vedantu's revision notes provide a comprehensive coverage of the entire topic, ensuring that all important concepts and subtopics are included. Concise and Organized: The notes are designed to be concise, focusing on the key points and core ideas. They are organized in a structured manner, making it easy for students to navigate and revise the content. Simplified Explanation: The revision notes offer simplified explanations of complex concepts, making them more accessible and easier to understand. This helps students grasp the material more effectively. Key Formulas and Equations: The notes highlight the key formulas and equations relevant to the topic, ensuring that students have a clear understanding of the mathematical aspects of Electrostatic Potential and Capacitance. Examples and Illustrations: Vedantu's revision notes often include examples and illustrations that help clarify concepts and provide practical applications, enabling students to better relate theory to real-world scenarios. Quick Recap: The revision notes serve as a quick recap of the important points, allowing students to review the material efficiently before exams or assessments. Exam-Oriented Approach: Vedantu's revision notes are designed with an exam-oriented approach, focusing on the topics and concepts that are frequently asked in examinations. This helps students prepare effectively and increase their chances of scoring well. Accessible Anytime: Vedantu's revision notes are easily accessible online, allowing students to study at their convenience and revise the material anytime, anywhere.

The LMS has been an essential tool in curriculum design and development and in organizing factors that motivate student learning, especially in online distance learning. However, an LMS can be used in blended, hybrid, and in-class delivery modes. It is a software application designed to help in the administration of courses for both students and instructors. Such systems have been designed for use in learning and teaching activities (Chung et al., 2012). They also provide a variety of interaction methods between instructors and learners to facilitate the learning process better, You must remember well-designed LMS could also help improve student skills, such as effective online learning and self-direction (Norouzi, 2014). Students could use the system to enhance performance (perceived usefulness), and they could use such systems with little effort (perceived ease of use) (Venkatesh & Davis, 2000). A majority of higher education institutions have incorporated LMS systems; they have been used in university systems by schools, faculty members, and instructors (Klobas & McGill,. 2010), Because so much of higher education has been focused on course delivery Chapter3 INSTRUCTIONAL DELIVERY SYSTEMS AND EDUCATIONAL TECHNOLOGY i 71 in a physical classroom, the implementation of an LYS has a;ded institutons in transitioning to new online universe of curriculum de!ivery (Georgou!i, & Guerre. 2NS). Repositories, central databases, and online meeting 'oations are all characteristcs of a management system. As a concept, a 'earning management system is a broad idea and an example of technology's inabifity to be specific in terms of a definition. Several requirements a generat overview of what constitutes a leaming management system, such as those listed above Finally, end-user access is also a part of a learning management system with various levels being set up by security. For example, students have read-onty access, faculty members have read and write access, and technical staff has complete access for support and administrative duties (Graf & Chien, 2009). At its core, a learning management system contains internal or Web-based support and management for numerous aspects of learning and teaching (Hiary & Abu-Shawar, 2009). This allows access from numerous locales, usually on a 24-hour basis. When looking at a university or college, this concept begins to grow greatly depending on the organization's size and scope; department, and degree program. Leaming management systems also go by other names such as course management systems, and their use goes beyond higher education institutions to include businesses and individual instructors. Meis)ar-Tal, Kurtz, and Pieterse (2012) mentioned three primary purposes of an CMS. They include the following: 1. to provide students with digital learning materials; 2. to employ interactive learning activities with students in the forums; and 3. to manage the course and the learners. Faculty members who use an LMS to make available lecture notes and other classroom resources for their face-to-face class create a web-enhanced classroom experience. Regardless of its usage, requirements for classification as a learning management system include several key concepts like the availability of assets over networks, providing hosting, administration. and support. With the requirements set, utilization becomes the focal point. A fully utilized learning management system looks at use at the student level, faculty level, and administration level. proper utilization of learning management systems should mirror traditional higher education goals, enhancing students' experiences. For learninä management systems, this creates a central hub for a class activity. For some classes, all activities work in the learning management system, while others only use its resources for select activities.

Related quizzes

Related quizzes