Facilities Management

Layout and look of facilities in operations management

Solid Waste Disposal, Management and Facilities

7.018 Safe Injection Practices (Refer to 7.07 Safe Injection Policy) Environment of Care: Active participation with all identified projects to assess compliance with infection control standards. . Surveillance, Control, and Reporting includes: Baseline information about the frequency and type of nosocomial infections. Identification of patients and/or staff with communicable or potentially communicable infections. Patients identified with a communicable disease will be isolated from other patients in the facility or, if this is not possible, they will be transferred to a local hospital for care or rescheduled. Identification of clusters of microorganisms or significant deviations from endemic level. Reporting to committees and outside agencies, when required. Investigation of infections as needed. Immediate implementation of corrective and preventive measures that result in improvements. The Infection Control nurse or designated staff member will perform facility audits and report results to the QI committee and Board of Managers. EVALUATION Evaluation and improvement of the infection prevention and control activities are important steps in the Center’s efforts to control and prevent infection. Infection prevention and control practices should become a routine part of the care, treatment, or services the center provides to patients. Patients expect and deserve hygienic and safe care even if their contact with the Center does not extend beyond a single visit. Continuous review of the goals, activities, and outcomes of the Center’s initiative are therefore followed by improvement activities that are realistic in expectation and, above all, effective. Evaluation of the plan shall include but not be limited to: Evaluation of the infection prevention and control activities annually and whenever risks significantly change. The evaluation includes a review of the following: The infection prevention and control prioritized risks The infection prevention and control goals. Implementation of infection prevention and control Outcomes of infection prevention and control activities. Findings from the evaluation are communicated at least annually to the Quality Management Committee References: http://oneandonlycampaign.org/content/what-are-they-why-follow-them. Centers for Disease Control and Prevention (CDC). (2004). Guidance for the Selection and Use of Personal Protective Equipment (PPE) in Healthcare Settings. Retrieved January 29, 2015 from www.cdc.gov/niosh/topics/bbp/sharps.html. Centers for Disease Control and Prevention (CDC). (2003). Guidelines for Environmental Infection Control in Health-Care Facilities 52(RR10);1-42. Retrieved January 29, 2015 from http://www.cdc.gov/mmwr/preview/mmwrhtml/rr5210a1.htm. Centers for Disease Control and Prevention (CDC). (2002). Guideline for Hand Hygiene in Health-Care Settings: Recommendations of the Healthcare Infection Control Practices Advisory Committee and the HICPAC/SHEA/APIC/IDSA Hand Hygiene Task Force. MMWR. 51(RR-16). Retrieved January 29, 2015 from http://www.cdc.gov/mmwr/preview/mmwrhtml/rr5116a1.htm. Centers for Disease Control and Prevention (CDC). (2008). Sharps Safety Workbook. Retrieved April 24 2014 from http://www.cdc.gov/sharpssafety/pdf/workbookcomplete.pdf. Guideline for Infection Control in Healthcare Personnnel available at: Guideline for Infection Control in Healthcare Personnel available at: http://www.cdc.gov/hicpac/pdf/InfectControl98.pdf Immunization of HealthCare Personnel, guidance available at: http://www.cdc.gov/vaccines/spec-grps/hcw.htm Occupational Safety & Health Administration (OSHA) Bloodborne Pathogens and Needlestick Prevention Standards available at: http://www.osha.gov/SLTC/bloodbornepathogens/index.html Sax H, et al. (2007). My five moments for hand hygiene: A user-centered design approach to understand, train, monitor and report hand hygiene. For the World Health Organization. J Hosp Infect 67(1):9–21. World Health Organization (WHO). (2005). World Alliance for Patient Safety. WHO Guidelines on Hand Hygiene in Health Care. Retrieved January 29 , 2015 from http://www.who.int/patientsafety/events/05/HH_en.pdf.

Nutrition refers to the science that deals with the various factors of which food is composed and the way in which proper nourishment is brought about. Home Economics and Livelihood Education 7 Seibo College 152 Human nutrition involves properly feeding the people. It is therefore important to learn more about nutrition, taking into consideration the three (3) important factors: a. the food we eat b. the way it is digested, absorbed and used in the tissues of the body c. the kind of people for whom the food is intended Good health or “wellness” is not a matter of chance. Good health is a product of good nutrition which is the result of an adequate supply of essential nutrients in your body. Lack of these nutrients lead to illness or a condition known as “malnutrition”. Malnutrition occurs if there is an imbalance intake of nutrients or an inadequacy of one or any of the nutrients. Malnutrition are manifested in the following cases: 1. obesity due to overeating- Obesity occurs when a person eats more than what the body requires under normal condition. This results in an excess supply of calories that leads to obesity or overnutrition. 2. stunted growth of children due to lack of protein- If there is no sufficient supply of carbohydrates or fats protein is used by the body as an alternative source of energy. 3. under weight due to lack of carbohydrates- If the total amount of nutrients provided by the diet is insufficient , it results to undernutrition. What is good nutrition? Home Economics and Livelihood Education 7 Seibo College 153 What are the causes of malnutrition? 1. ignorance or lack of knowledge about proper food intake 2. low standard of living 3. limited food supply 4. emergence of calamities or social unrest 5. increased family size 6. poor eating habits What are food habits? Food habits mean one’s attitude towards food. If the body is fed by junk foods and became over/under supplied with particular vitamins, protein or other nutrients then the body will suffer from malnutrition. Let us identify the factors affecting food habits.  Education – knowledge about nutrition will help one to make wise decision about food.  Foods available - The kinds of food available to you usually are the foods you eat. Some foods can grow only in certain types of geographic locations and this determines the foods available in such locations  Religion - What foods people can eat or cannot eat have been dictated by their religious beliefs. For example, Moslems do not eat pork because Islam forbids them to eat it. Home Economics and Livelihood Education 7 Seibo College 154  Ethnicity – members of cultural groups formed their own living patterns which include food customs. It includes what food can or cannot be eaten.  Income/economic status – the type of food you choose depends on how money you have. Income dictates what food you can eat and how you eat them.  Convenience -. Meal management practices affect food habits because you can only prepare and eat foods you can easily cook with the facilities and the knowledge you have. Food habit refers to the way in which different people select , cook, serve and eat food that are available to them. Home Economics and Livelihood Education 7 Seibo College 155 Look at the diagram below for a better understanding. FACTORS THAT AFFECT FOOD HABITS FOOD HABITS Education Foods available Religion Convenience Economic status Ethnicit

Why and How Managers Plan Importance of planning The planing process Benefits of planning Planning and time management Types of PLans used by managers Long term and short term plans Strageic and tactical plans Operational plans Planning Tools and Techiqunes Forecasting Contrigency planning Scenario planning Benchmaking Use of staff planners Implementing Plans to Achive Results Goal setting Goal management Goal alignment Participation and involvement Planning Def: The process of setting objectives and determining how best to accomplish them Planning at Eaton Corporation “Making the hard decision before events force them upon you, an anticipating the future needs of the market before the demand asset itself Objectives and goals Identifity the specific results or desired outcomes that one intends to achieve Plan Def: A statement of action steps to be taken in order to accomplish the objectives (goals) Steps in the planning process: Define your objectives Determine where you stand vis-a-vis objectives Develpo premises reagrdsing future conditions Analyze alternatives and make a plan Implement the plan and evaluate results What are the benefits of planning Improves focus and flexibility Imporves action orteitation Imporves coordination and control Imporves time management Time Managment Personal time management tips Do say “no” to request that distract you form what you should be doing Dont get bogged down inn details that can be addressed later Do screen telephone calls, emails and meeting request Dont let drop in visitors, text messaging use up your time Do prioritize your important and urgent work Dont become calendar bound by letting other control your schedule Do follow priorities; do most important and urgent work first Some 77% of mangers in one survey said that digital age has increased th number of decisions they have to make 43% said there was less time available to make these decisions Types of plans used by Managers What is teh time horizon Long term vs Short term Long term Look three or more years into teh future Short term plans Typically cover one year or less However: the increasing environmental complexity and dynamism of recent years has severely tested the concept of “long-term” planning Plans are subject to frequent revisions Most executives would likely agree that these complexities adn uncertainties challenge how er actually go about planning and how far ahead we can really plan At the very least we can conclude that there is a lot less permanency to long term plans today and that tey are subject to frequent revision Managment reaeracher Eillot Jaques believes tha people vary in their capability to think with different time horizons Types of Plans used by Managers (3 of 5) Strategic plans Set broad, comprehensive and linger term action directions for teh entire organization or major division Vision Clarifies purpose of the organization and what it hopes to be on the future Typical plans Specify how the organizations resources are used to implement strategy Tactical plans in business often take the form of functional plans Functional plans Incidate how different component within the organiztion will help accompnlish the overall strategy Production plans Finacial plans Facilites Plans Logisitc plans Marketing plans Human Resource Plans Operation plans Describe short-term activities to implement strategic plans Policies: Are standing plans that communicate guidelines for decisions Ex: Policies on office romances: The media is quick to report when a top executive or public figures runs into trouble over an office affair. Are there ant policies on office romances? Employer polices on office raltioshiis vary. One survey find teh following: 24% prohibit relationships among employees in the same department 13% prohibit relationships among employees who have the smae supervisor 80% prohibit relationships between supervisors and subordinates 5% have no restrictions on office romances Procedures: Are rules that describe actions to be taken in specific situations Budgets: are single use plans that commit resources to projects or activities Zero based budgets: allocate resources as if each budget were brand new There is no guarantee that any past funding will be renwer. All propsales, old and new, must compete for available funds at teh start of each new budget cycle Forcasting Attempts to predict the future Qualitaive forecasting uses expert opinions Quantitative forecasting uses mathematical models and statiscal aanylsis of historical data dna surveys Contingency planning Identify alternative course of action to take when things go wrong Anticipate changing conditions Contain trigger points to indicate when to activate plan (or a specific course of action) Scenario planning A long term version of contingency planning Identifying alternative future scenarios Plans made for each future scenario Increases organizations flexibility and preparation for future shocks Benchmarking Use of external and internal comparisons to better evaluate current performance Adopting best practices: things people adn organization do that lead to superior performance Staff Planners Experts who assist in all steps of the planning process They help bring focus and expertise to a wide variety of planning tasks Important: Communication between staff planers landline managers is essential for teh success of teh planning process Goal Setting - Always set SMART goal The solution: Goal Aligment Between Team Leader and Team Member Jonintly plan: Set objectives, set standards, choose actions Individually acy: Perform tasks (member), provide support (leader) Jointly control: Review results, discuss implications, renew cycle x4 Collective effort and commitment Participatroy planning Includes in all planning steps that people who will be affected by the plans adn askedd to help implement them Unloacks motivational potential of goal setting Management by objective (MBO) promotes participation Participation increases understanding and acceptance of plan and commitment to success Participatory planning - Number of people involved in teh decision making process Amazon is intensely focused on what it does. It believes in creating tight single-threaded teams, also known as “2 pizza team.” Data and Decision Making What are some of the important competencies managers must have today? Delegate Marketing and technology Manager must have Technological competency Ability to understand new technologies and to use them to their best advantage Information competency Ability to locate, gather, organize and display information for decision-making and problem solving Analytical competency Ability to evaluate and analyze information to make actual decisions and solve real problems What is the difference between Data and Information Data Raw facts and observation Information Data made useful and meaningful for decision-making Important concepts Big data Exists in huge quantities and is difficult to process without sophisticated mathematical and analytical techniques Data production today Bernard Marr is an internationally best-selling author. He helps organizations improve their business performance, use data more intelligently Data mining The process of analyzing data to produce useful information for decision-makers Management Analytics The systematic evaluation and analysis of data to make informed decision Information drives management Bad Data Refers to information that can be erroneous, misleading, and without general formatting The challenge: Can er use the data that is available in the “Big Data” Needs to be valid Can not trust everything out there Being ethical Look at the trends Data is structured and unstructured Data BIg Data = Structured + Unstructured Information Drive Management decision making What are the characteristics of useful information Easy to access If its credible Accurate Characteristics of useful information: Timely High quality Complete Relevant Understandable What about bad data It's not credible Miss information If it is not structured/ organized Bias based on opinions Confusing If its updated Bad data Refers to information that can be erroneous miss What are some examples of Management information system Business intelligence -BI Information systems to extract and report data in organized ways that are useful to decision-makers Executive dashboards Visually update and display key performance metrics (or Key Performance Indicators -KPIs) and information on a real-time basis Information needs in organization External Environment Information exchanges with the external environment Gather intelligence information Provide public information Information needs within the organizations (internal Enviroement) Information exchange within the organization Facilitate decision making Facilitate problem-solving Managers as information processors Continually gather, share and receive information Now as much electronic as it is face-to-face Always on, always connected How many people telecommute at least once a week 70% of people globally work remotely at least once a week, Work at home after covid 19 our forecast Our best estimate it that 25-30% of the workforce will be working form home multiple days a week by the end of 2021 As of 2023, 12.7% of full time employees work from home, while 28.2% work a hybrid model Managers as problem solvers Problem-solving The process of identifying a discrepancy between actual and desired performance and taking action to resolve it Ishikawa Fishbone diagram To identify the cause of problems Decision A choice among possible alternative courses of action Performance threat Something is wrong or has the potential to go wrong Performance opportunity The situation offers the chance for a better future if the right steps are taken Problem-solving approaches or style - from textbook Problem avoiders Inactive in information gathering and solving problems Problem seekers Proactive in anticipation of problems and opportunities and taking appropriate action to gain an advantage Problem solvers Reactive in gathering information and solving problem Managers - can approach problems in a systematic or intuitive manner Systematic thinking approaches problem in rational, step-by-step and analytical fashion Intuitive thinking approaches problems in a flexible and spontaneous fashion Multidimensional thinking- applies both intuitive and systematic thinking Managers face structured and unstructured problems Structure problems Are ones that are familiar, straight forward, and clear with respect to information needs Program decisions apply solutions that are readily available from past experiences to solve structured problems Know how to solve them Familiar Know what we are dealing with Unstructured problems Are ones that are full of ambiguities and information deficiencies Nonprogrammed decisions apply a specific solution to meet the demands of a unique problem Commonly faced by higher-level management Crisis decision making A crisis involves an unexpected problem that can lead to disaster if not resolved quickly and appropriately Ruled for crisis management Figure out what is going on Remember that speed matters Remember that slow counts, too Respect the danger of the unfamiliar Value the skeptic Be ready to “fight fire with fire” Managers make decisions with various amounts of information Certain environment Offers complete information on possible action alternatives and their consequences Risk environment Lacks complete information but offers probabilities of the likely outcomes for possible action alternatives Uncertain environment Lacks so much information that it is difficult to assign probabilities to the likely outcomes of alternative Ex: Certain and uncertain environments: The worldwide Governance Indicators for over 200 countries, comparing distinct environments (Canada-Brazil) Step 1-Identify and define the problem Focuses on information gathering information processing and deliberation Decision objectives should be established What are some common mistakes in definding problems? Common mistakes in defining problems Defining the problem too broadly or too narrowly Focusing on symptoms instead of causes Choosing the wrong problem to deal with Step 2- Generate and Evaluate Alternative Courses of Action Potential solutions are formulated and more information is gathered, data are analyzed, the advantages and disadvantages of alternative solutions are identified Common mistakes: Abandoning the search for alternatives too quickly Step 3- Decide on a preferred course of Action Two different approaches Behavioural model leads to satisficing decisions Classical model les to optimising decisions Behavioural Model Rationality is bounded because: There are limits our thinks capacity Available information (incomplete) Time constraints Step 4-Implement the decision Involves taking action to make sure the solution decided upon becomes a reality Managers need to have the willingness and ability to implement action plans Problems: Lack of participation error should be avoided Step 5 - Evaluate Results Involves comparing actual and desired results The positive and negative consequences of the chosen course of action should be examined If actual results fall short desire results, the manager returns to earlier steps in the decision-making process At all steps, check ethical reasoning Ask these spotlight questions Utility Does teh decision satisfy all constituents or stakeholders Rights Does the description respect the rights and duties of everyone? Justice Is the decision consistent with the canons of justice Caring Is the decision consistent with my responsibilities to care? Issues in decision-making How do errors happen? Heuristics: are strategies for simplifying decision-making Availability Bias: Bases a decision on recent information or events Representativeness bias: Bases a decision on similarity to other situations Anchoring and Adjustment Bias: Bases a decision on incremental adjustment from a prior decision point Framing error: Tring to solve a problem in the context perceived, positive or negative Confirmation Error: Focusing on information that confirms a decision already made Escalating commitment: Continuing a course of action even though it is not working Creative Decision making Creativity is the generation of a novel idea or unique approach that solves a problem or crafts an opportunity Big C: Creativity occurs when extraordinary things are done by exceptional people Little C: Creativity occurs when average people come up with unique ways to deal with daily events and situations The three types of situational creativity drivers Chapter review What are objectives and goals? The specific results or desired outcomes What are the 5 characteristics of great (SMART) goals? Forecasting - Attempts Qualitative forecasting uses options Quantitative forecasting uses mathematical models and statistical analysis of historical data and surveys Scenarios-Oracle’s crystal ball combines qualitative and quantitative methods

EVALUER LE RISQUE CLIENT I Les enjeux liés au risque client II la prise de renseignements pendant la phase commerciale III L’évaluation de la solvabilité d’un prospect ou client 1. A partir du bilan comptable 2. A l’aide d’indicateurs internes IV Les outils d’évaluation des risques I Les enjeux liés au risque client 1. Définition et critères de risques On entend par risque client l’ensemble des situations dans lesquelles le client pourrait compromettre la pérennité du fournisseur. Quelques critères permettent de repérer le risque client : - la taille et l’âge de l’entreprise - le produit qu’elle propose, - son client avec ses propres clients (la sous traitance par exemple induit un lien de dépendance) - le secteur sur lequel elle évolue - la concurrence qu’elle subit - et le montant de ses disponibilités On peut ainsi répartir les degrés de risque : 2. Les impayés clients : première cause de faillite des entreprises Par principe, l’entreprise dépense avant d’encaisser. En accordant des délais de paiement, elle se prive de trésorerie. Elle a alors un besoin en fonds de roulement (BFR), c'est-à-dire besoin de disposer d’une trésorerie d’avance. Tout retard de paiement engendre donc une augmentation du BFR que l’entreprise n’est parfois plus en état de couvrir (découvert bancaire).Lorsque le client est insolvable, c’est un manque de trésorerie qui pèse sur l’entreprise et donc sur sa pérennité. La PME limite donc les risques si certains de ses clients payent comptant. Les entreprises activent donc plusieurs stratégies pour faire face à leurs impayés : 29% gèrent les relances en interne, 24% négocient des facilités de caisse avec leur banque et 19% négocient avec les fournisseurs. II la prise de renseignements pendant la phase commerciale L’entreprise qui souhaite conclure un contrat avec un prospect professionnel peut consulter un certain nombre de documents disponibles auprès d’organismes. Les organismes les plus sollicités sont : - la greffe du tribunal de commerce : elle délivre gratuitement des informations sur les entreprises immatriculées au registre du commerce et des sociétés telles que les statuts, les comptes annuels, l’état d’endettement, l’extrait kbis. L'extrait Kbis représente la véritable « carte d'identité » à jour d'une entreprise immatriculée au Registre du Commerce et des Sociétés (RCS). - les sociétés spécialisées fournissent des informations commerciales et financières, des documents comptables et des analyses payantes permettant de vérifier l’état de santé des entreprises : - les cabinets de recouvrement et sociétés d’assurance : ils réalisent des enquêtes de solvabilité et émettent un avis sur le risque de défaillance sous forme de score ou de note. - Les banques : les entreprises sont notées par les banques. La cotation de la banque mesure la capacité de l’entreprise à honorer ses engagements financiers sur 3 ans. Grâce à cette cotation, la PME peut ainsi , par l’intermédiaire de la banque, vérifier si le prospect ou client est solide financièrement. III L’évaluation de la solvabilité d’un prospect ou client La solvabilité correspond à la capacité de l’entreprise à faire face à ses engagements à long terme. L’entreprise est solvable si la valeur de ses actifs (immobilisations, créances, stocks et disponibilités) est supérieure à ses emprunts et dettes. Une entreprise peut être solvable mais peut manquer de liquidités, c'est-à-dire d’argent disponible au quotidien. La liquidé mesure donc la capacité de l’entreprise à faire face à ses engagements à court terme. 1. A partir du bilan comptable Le bilan comptable fournit des indications sur la santé financière de l’entreprise prospect Les définitions que vous devez maitriser : • Pour l’actif : C’est quoi une Immobilisation ? La notion d'immobilisation intègre l'ensemble des biens durables détenus par une entreprise sur plus d'un exercice comptable et qui ne sont pas destinés à la revente. Les immobilisations financières correspondent aux actifs financiers d'utilisation durable possédés par l'entreprise. Il s'agit notamment des titres de participation, des prêts accordés… Les immobilisations incorporelles comprennent les frais d'établissement, les frais de recherche et développement, les concessions, brevets, licences, marques, logiciels et autres droits similaires, le droit au bail, le fonds commercial. Une immobilisation corporelle correspond à un actif physique que l’entreprise entend utiliser au-delà de la clôture de l’exercice comptable en cours : les terrains, les constructions, l’agencement et les installations générales, l’outillage, le matériel, les véhicules, le mobilier et les équipements informatiques. Que signifie disponibilités ? Le poste "Disponibilités" est constitué des montants détenus en caisse (pièces et billets que l'entreprise possède) et des avoirs en banque (argent détenu sur les comptes bancaires de l'entreprise). On utilise également le terme de trésorerie. C’est quoi une valeur mobilière de placement ? Ce sont des titres financiers, actions ou obligations. En comptabilité, elles correspondent aux excédents de trésorerie placés par l'entreprise. • Pour le passif : Que signifie capitaux propres ? Les capitaux propres sont les ressources financières que possède l'entreprise Le capital social d’une entreprise est égal au montant total des apports de biens et d’argent des associés Que signifie réserves ? Cumul des bénéfices des exercices antérieurs qui n'ont pas été redistribués aux propriétaires de l'entreprise, ni intégrés dans son capital Que signifie résultat ? Il correspond aux ressources restantes à l'entreprise une fois les charges déduites du chiffre d'affaires. 2 A l’aide d’indicateurs internes Une entreprise manque souvent de temps et de moyens pour suivre l’ensemble des ses encours clients. Toutefois, il est nécessaire d’analyser régulièrement certains supports pour anticiper les problèmes de trésorerie. Elle peut - analyser son portefeuille clients via la méthode ABC (vu dans un chapitre précédent), - prendre du recul sur les retards de paiement : le service comptable signale les retards de paiement ou les demandes régulières de report d’échéances. La balance âgée permet de visualiser les clients à relancer Exemple : - mettre en place des indicateurs de suivi des impayés via un tableau Excel Exemple : IV Les outils d’évaluation des risques Les entreprises peuvent se procurer des logiciels dédiés au risque client mais il sont souvent très complexes à utiliser. Certaines entreprises utilisent le crédit management : c’est l’ensemble des procédures financières ou juridiques visant à optimiser le chiffre d’affaires de l’entreprise en accélérant les règlements clients. Une des méthodes de crédit management s’appelle la méthode des points de risque. Elle consiste à classer les clients selon leur risque afin de leur fixer des modalités de paiement adaptés. Elle permet donc d’évaluer les risques de coopération et de se prémunir au cas par cas. Exemple de tableau des points de risque

Related quizzes

Related quizzes