Food Measurements | Quizalize

Kindly create a 30 items multiple choice test from this laboratory activity entitled laboratory do's and donts: LABORATORY SAFETY Dos: Wear Appropriate Attire: Wear lab coats, safety goggles, gloves, and any other required personal protective equipment (PPE) at all times in the lab. Follow Protocols: Adhere strictly to established protocols and procedures for all experiments and tasks. Label Everything: Clearly label all containers, tubes, vials, and equipment with relevant information, including date, contents, and your initials. Calibrate Instruments: Regularly calibrate and maintain all lab equipment according to manufacturer guidelines to ensure accurate measurements. Keep Workspace Organized: Maintain a clean and organized workspace to prevent contamination and ensure efficient work. Dispose of Waste Properly: Follow the correct disposal procedures for hazardous waste, sharps, and non-hazardous materials in accordance with local regulations. Use Pipette Aids: Always use pipette aids or bulb fillers to avoid mouth pipetting and potential exposure to hazardous substances. Record Observations: Keep detailed and accurate records of your experiments, observations, procedures, and results. Label Samples Clearly: Label all samples with accurate and descriptive information to avoid mix-ups and confusion. Communicate: Maintain clear communication with colleagues and supervisors about your work, findings, and any potential issues. Follow Safety Guidelines: Adhere to all safety guidelines, emergency procedures, and evacuation plans in case of accidents or incidents. Report Accidents and Incidents: Report any accidents, spills, or incidents to your supervisor immediately, no matter how minor they may seem. Don'ts: Don't Eat, Drink, or Smoke: Never consume food, drinks, or smoke inside the laboratory to prevent contamination and chemical exposure. Don't Pipette by Mouth: Avoid mouth pipetting to prevent the risk of inhaling or ingesting hazardous substances. Don't Use Chipped Glassware: Do not use chipped, cracked, or compromised glassware, as they can lead to leaks and contamination. Don't Work Alone: Avoid working in the lab alone, especially with hazardous materials or equipment. Don't Ignore Safety Procedures: Never disregard safety procedures or skip steps, even if you're experienced with a particular task. Don't Contaminate Reagents: Avoid contaminating reagents by using clean tools, pipettes, and containers. Don't Rush: Take your time and follow protocols accurately. Rushing can lead to mistakes and unsafe conditions. Don't Block Emergency Equipment: Keep emergency equipment, such as eyewash stations, fire extinguishers, and safety showers, unobstructed and easily accessible. Don't Pour Chemicals into Sinks: Do not pour chemicals down sinks unless you are certain they are safe to do so, as this can lead to environmental contamination. Don't Use Unlabeled Chemicals: Never use unlabeled or improperly labeled chemicals. Always know what you're working with. Don't Wear Loose Clothing or Jewelry: Avoid wearing loose clothing, open-toed shoes, and excessive jewelry that could get caught in equipment or chemicals. Don't Assume, Ask: If you're unsure about something, never assume. Always ask for guidance from your supervisor or colleague

Figure 18-11 represents the amount of energy stored as organic material in each trophic level in an ecosystem. The pyramid shape of the diagram indicates the low percentage of energy transfer from one level to the next. On average, 10 percent of the total energy consumed in one trophic level is incor- porated into the organisms in the next. Why is the percentage of energy transfer so low? One reason is that some of the organisms in a trophic level escape being eaten. They eventually die and become food for decomposers, but the energy contained in their bodies does not pass to a higher trophic level. Even when an organism is eaten, some of the molecules in its body will be in a form that the consumer cannot break down and use. For example, a cougar cannot extract energy from the antlers, hooves, and hair of a deer. Also, the energy used by prey for cellu- lar respiration cannot be used by predators to synthesize new bio- mass. Finally, no transformation or transfer of energy is 100 percent efficient. Every time energy is transformed, such as during the reactions of metabolism, some energy is lost as heat. Limitations of Trophic Levels The low rate of energy transfer between trophic levels explains why ecosystems rarely contain more than a few trophic levels. Because only about 10 percent of the energy available at one trophic level is transferred to the next trophic level, there is not enough energy in the top trophic level to support more levels. Organisms at the lowest trophic level are usually much more abundant than organisms at the highest level. In Africa, for exam- ple, you will see about 1,000 zebras, gazelles, and other herbivores for every lion or leopard you see, and there are far more grasses and shrubs than there are herbivores. Higher trophic levels con- tain less energy, so, they can support fewer individuals.A population is a group of organisms that belong to the same species and live in a particular place at the same time. All of the bass living in a pond during a certain period of time make up a pop- ulation because they are isolated in the pond and do not interact with bass living in other ponds. The boundaries of a population may be imposed by a feature of the environment, such as a lake shore, or they can be arbitrarily chosen to simplify a study of the population. The humans shown in Figure 19-1 are part of the pop- ulation of a city. The properties of populations differ from those of individuals. An individual may be born, it may reproduce, or it may die. A population study focuses on a population as a whole—how many individuals are born, how many die, and so on. Population Size A population’s size is the number of individuals that the population contains. Size is a fundamental and important population property but can be difficult to measure directly. If a population is small and composed of immobile organisms, such as plants, its size can be determined simply by counting individuals. Often, though, individ- uals are too abundant, too widespread, or too mobile to be counted easily, and scientists must estimate the number of individuals in the population. Suppose that a scientist wants to know how many oak trees live in a 10 km2 patch of forest. Instead of searching the entire patch of forest and counting all the oak trees, the scientist could count the trees in a smaller section of the forest, such as a 1 km2 area. The scientist could then use this value to estimate the population of the larger area. SECTION 1 OBJECTIVES ● Describe the main properties that scientists measure when they study populations. ● Compare the three general patterns of population dispersion. ● Identify the measurements used to describe changing populations. ● Compare the three general types of survivorship curves. VOCABULARY population population density dispersion birth rate death rate life expectancy age structure survivorship curve FIGURE 19-1 A population can be widely distributed, as Earth’s human population is, or confined to a small area, as species of fish in a lake are. Copyright © by Holt, Rinehart and Winston. All rights reserved. 382 CHAPTER 19 If the small patch contains 25 oaks, an area 10 times larger would likely contain 10 times as many oak trees. A similar kind of sampling technique might be used to estimate the size of the pop- ulation shown in Figure 19-2. To use this kind of estimate, the sci- entist must assume that the distribution of individuals in the entire population is the same as that in the sampled group. Estimates of population size are based on many such assumptions, so all esti- mates have the potential for error. Population Density Population density measures how crowded a population is. This measurement is always expressed as the number of individuals per unit of area or volume. For example, the population density of humans in the United States is about 30 people per square kilome- ter. Table 19-1 shows the population sizes and densities of humans in several countries in 2003. These estimates are calculated for the total land area. Some areas of a country may be sparsely popu- lated, while other areas are very densely populated. Dispersion A third population property is dispersion (di-SPUHR-zhuhn). Dispersion is the spatial distribution of individuals within the popu- lation. In a clumped distribution, individuals are clustered together. In a uniform distribution, individuals are separated by a fairly con- sistent distance. In a random distribution, each individual’s location is independent of the locations of other individuals in the popula- tion. Figure 19-3 illustrates the three possible patterns of dispersion. Clumped distributions often occur when resources such as food or living space are clumped. Clumped distributions may also occur because of a species’ social behavior, such as when animals gather into herds or flocks. Uniform distributions may result from social behavior in which individuals within the same habitat stay as far away from each other as possible. For example, a bird may locate its nest so as to maximize the distance from the nests of other birds. These migrating wildebeests in East Africa are too numerous and mobile to be counted. Scientists must use sampling methods at several locations to monitor changes in the population size of the animals. FIGURE 19-2 TABLE 19-1 Population Size and Density of Some Countries Population size Population density Country (in millions) (in individuals/km2) China 1,289 135 India 1,069 325 United States 292 30 Russia 146 8 Japan 128 337 Mexico 105 54 Kenya 32 54 Australia 20 3 dispersion from the Latin dis-, meaning “out,” and spargere, meaning “to scatter” Word Roots and Origins Copyright © by Holt, Rinehart and Winston. All rights reserved. POPULATIONS 383 The social interactions of birds called gannets, which are shown in Figure 19-3b, result in a uniform distribution. Each gannet chooses a small nesting area on the coast and defends it from other gannets. In this way, each gannet tries to maximize its distance from all of its neighbors, which causes a uniform distribution of individuals. Few populations are truly randomly dispersed. Rather, they show degrees of clumping or uniformity. The dispersion pattern of a population sometimes depends on the scale at which the popu- lation is observed. The gannets shown in Figure 19-3b are uni- formly distributed on a scale of a few meters. However, if the entire island on which the gannets live is observed, the distribution appears clumped because the birds live only near the shore. POPULATION DYNAMICS All populations are dynamic—they change in size and composition over time. To understand these changes, scientists must know more than the population’s size, density, and dispersion. One important measure is the birth rate, the number of births occur- ring in a period of time. In the United States, for example, there are about 4 million births per year. A second important measure is the death rate, or mortality rate, which is the number of deaths in a

Meaning of Tray Clothes These are materials used to cover food placed inside a tray before serving them. They are used to serve sick people. The following are the steps in making tray clothes: 1. Use paper pattern according to measurement of your choice to cut out the materials. The materials may be cut in rectangular, triangular or circular shape. 2. Cut out the shape with a hem of ½ an inch to tack round it. 3. Cut out the paper shape from the clothing material. 4. Run stitches to hold down the hems. 5. Finish the edges with lace or bias binding. 6. Trim your article. HANDKERCHIEF Handkerchief is used for the following purposes: 1. To wipe away sweat from the face. 2. To cover one’s mouth when sneezing or coughing. 3. To blow out phlegm from the nose. The following are the methods for making handkerchief: 1. Use paper pattern to cut materials into 16inches by 16inches 2. Turn a hem of 1/2inch and tack it round in circumstance. 3. Run stitches to hold down the hem. 4. Iron the article to smoothen the edges.

Nutrition Notes Nutrition- study of how your body uses food Process by which body uses nutrients How you look and feel Resist diseases and illness How you perform physically and mentally Nutrients: substances in food your body needs to grow, repair and supply energy to your body cells 6 Classes of Nutrients 1.Carbohydrates: 1 gram= 4 calories 2. Protein: 1 gram- 4 calories 3. Fats: 1 gram= 9 calories 4.Water 5. Vitamins 6. Minerals Calorie: measurement of energy in food Metabolism: Rate at which body burns energy(calories) Hunger: physical drive to eat Appetite: pshycological desire for food What influences your food choices: Foods you like Health Reasons Family and Culture Time & Money Advertising Emotions Friends Social Media: Modeling Nutrients Carbohydrates: your body’s main source of energy sugars/starches in food 45%-65% of diet #1 source of energy Simple: sugars converted to glucose= energy (fruits, dairy, honey, some manufactured foods) Complex: sugars linked together (starches) (grains, bread, pasta, beans, vegetables) Fiber: tough, indigestible carbohydrates Cleans our digestive system Prevents some types of cancer Prevents heart disease (fruits, vegetables, whole grains,nuts) 2. Protein: growth and repair of body tissues Made up of chemicals called “amino acids” Basic building material of all body cells (muscles, bones, skin, internal organs) Secondary source of energy protein(hemoglobin) attaches to oxygen in blood Functions as hormones regulating body functions 10-15% of diet *Body uses 20 Amino Acids found in food ( body produces 11 and 9 must come from diet) Essential amino acids: 9 amino acids body doesn't produce Complete Amino Acids: foods that contain all 9 essential amino acids ( animal products) Incomplete Amino Acids: food products that do not contain all 9 essential amino acids. Fats 15-25% of diet Secondary source of energy Blood clotting Controlling inflammation Maintains healthy skin/hair absorb /transport fat soluble vitamins Regulates body temperature Types of Fat Unsaturated: “good” fat Liquid at room temperature Can help fight heart disease (veg oil, nuts) Saturated: “bad” fat Solid at room temp Clogs arteries Causes strokes, heart attack, diabetes (animal products, meat, dairy) Cholesterol: waxy like fat substance found in meat products HDL: good type of cholesterol Body creates(liver) Creates cell wall, hormones, and vit D LDL: bad cholesterol- found in foods (clogs arteries) 4. Trans Fat: “one of the worst type of fats” Formed by a process called “hydrogenation”: adding Hydrogen molecules to unsaturated fats to make it more solid and resistant to chemical change. Vitamins A vitamin is a chemical compound that is needed in small amounts for the human body to work correctly. Vitamins are classified as either fat soluble (vitamins A, D, E and K) or water soluble (vitamins B and C). This difference between the two groups is very important. It determines how each vitamin acts within the body. The fat soluble vitamins are soluble in lipids (fats). Fat soluble vitamins can be stored in our body Water soluble vitamins must be taken every day Human body produces some amounts of Vitamin D & K

Food

110.31.b.17.C

Related quizzes

Related quizzes