Group 1 and 2 | Quizalize

Covalent Molecules and Compounds Just as an atom is the simplest unit that has the fundamental chemical properties of an element, a molecule is the simplest unit that has the fundamental chemical properties of a covalent compound. Some pure elements exist as covalent molecules. Hydrogen, nitrogen, oxygen, and the halogens occur naturally as the diatomic (“two atoms”) molecules H2, N2, O2, F2, Cl2, Br2, and I2 (part (a) in Figure 3.1.1). Similarly, a few pure elements exist as polyatomic (“many atoms”) molecules, such as elemental phosphorus and sulfur, which occur as P4 and S8 (part (b) in Figure 3.1.1). Each covalent compound is represented by a molecular formula, which gives the atomic symbol for each component element, in a prescribed order, accompanied by a subscript indicating the number of atoms of that element in the molecule. The subscript is written only if the number of atoms is greater than 1. For example, water, with two hydrogen atoms and one oxygen atom per molecule, is written as H2O. Similarly, carbon dioxide, which contains one carbon atom and two oxygen atoms in each molecule, is written as CO2. Covalent compounds that predominantly contain carbon and hydrogen are called organic compounds. The convention for representing the formulas of organic compounds is to write carbon first, followed by hydrogen and then any other elements in alphabetical order (e.g., CH4O is methyl alcohol, a fuel). Compounds that consist primarily of elements other than carbon and hydrogen are called inorganic compounds; they include both covalent and ionic compounds. In inorganic compounds, the component elements are listed beginning with the one farthest to the left in the periodic table, as in CO2 or SF6. Those in the same group are listed beginning with the lower element and working up, as in ClF. By convention, however, when an inorganic compound contains both hydrogen and an element from groups 13–15, hydrogen is usually listed last in the formula. Examples are ammonia (NH3) and silane (SiH4). Compounds such as water, whose compositions were established long before this convention was adopted, are always written with hydrogen first: Water is always written as H2O, not OH2. The conventions for inorganic acids, such as hydrochloric acid (HCl) and sulfuric acid (H2SO4), are described elswhere. Note! For organic compounds: write C first, then H, and then the other elements in alphabetical order. For molecular inorganic compounds: start with the element at far left in the periodic table; list elements in same group beginning with the lower element and working up. Write the molecular formula of each compound. a. The phosphorus-sulfur compound that is responsible for the ignition of so-called strike anywhere matches has 4 phosphorus atoms and 3 sulfur atoms per molecule. b. Ethyl alcohol, the alcohol of alcoholic beverages, has 1 oxygen atom, 2 carbon atoms, and 6 hydrogen atoms per molecule. c. Freon-11, once widely used in automobile air conditioners and implicated in damage to the ozone layer, has 1 carbon atom, 3 chlorine atoms, and 1 fluorine atom per molecule. Solution: a. • A The molecule has 4 phosphorus atoms and 3 sulfur atoms. Because the compound does not contain mostly carbon and hydrogen, it is inorganic. • B Phosphorus is in group 15, and sulfur is in group 16. Because phosphorus is to the left of sulfur, it is written first. • C Writing the number of each kind of atom as a right-hand subscript gives P4S3 as the molecular formula. b. • A Ethyl alcohol contains predominantly carbon and hydrogen, so it is an organic compound. • B The formula for an organic compound is written with the number of carbon atoms first, the number of hydrogen atoms next, and the other atoms in alphabetical order: CHO. • C Adding subscripts gives the molecular formula C2H6O. c. • A Freon-11 contains carbon, chlorine, and fluorine. It can be viewed as either an inorganic compound or an organic compound (in which fluorine has replaced hydrogen). The formula for Freon-11 can therefore be written using either of the two conventions. • B According to the convention for inorganic compounds, carbon is written first because it is farther left in the periodic table. Fluorine and chlorine are in the same group, so they are listed beginning with the lower element and working up: CClF. Adding subscripts gives the molecular formula CCl3F. • C We obtain the same formula for Freon-11 using the convention for organic compounds. The number of carbon atoms is written first, followed by the number of hydrogen atoms (zero) and then the other elements in alphabetical order, also giving CCl3F. Write the molecular formula for each compound. a. Nitrous oxide, also called “laughing gas,” has 2 nitrogen atoms and 1 oxygen atom per molecule. Nitrous oxide is used as a mild anesthetic for minor surgery and as the propellant in cans of whipped cream. b. Sucrose, also known as cane sugar, has 12 carbon atoms, 11 oxygen atoms, and 22 hydrogen atoms. c. Sulfur hexafluoride, a gas used to pressurize “unpressurized” tennis balls and as a coolant in nuclear reactors, has 6 fluorine atoms and 1 sulfur atom per molecule. Answer: a. N2O b. C12H22O11 c. SF6. Ionic Compounds The substances described in the preceding discussion are composed of molecules that are electrically neutral; that is, the number of positively-charged protons in the nucleus is equal to the number of negatively-charged electrons. In contrast, ions are atoms or assemblies of atoms that have a net electrical charge. Ions that contain fewer electrons than protons have a net positive charge and are called cations. Conversely, ions that contain more electrons than protons have a net negative charge and are called anions. Ionic compounds contain both cations and anions in a ratio that results in no net electrical charge. Note! Ionic compounds contain both cations and anions in a ratio that results in zero electrical charge.An ionic compound that contains only two elements, one present as a cation and one as an anion, is called a binary ionic compound. One example is MgCl2, a coagulant used in the preparation of tofu from soybeans. For binary ionic compounds, the subscripts in the empirical formula can also be obtained by crossing charges: use the absolute value of the charge on one ion as the subscript for the other ion. This method is shown schematically as follows: Crossing charges. One method for obtaining subscripts in the empirical formula is by crossing charges. When crossing charges, it is sometimes necessary to reduce the subscripts to their simplest ratio to write the empirical formula. Consider, for example, the compound formed by Mg2+ and O2−. Using the absolute values of the charges on the ions as subscripts gives the formula Mg2O2:Polyatomic Ions Polyatomic ions are groups of atoms that bear net electrical charges, although the atoms in a polyatomic ion are held together by the same covalent bonds that hold atoms together in molecules. Just as there are many more kinds of molecules than simple elements, there are many more kinds of polyatomic ions than monatomic ions. Two examples of polyatomic cations are the ammonium (NH4+) and the methylammonium (CH3NH3+) ions. P. The method used to predict the empirical formulas for ionic compounds that contain monatomic ions can also be used for compounds that contain polyatomic ions. The overall charge on the cations must balance the overall charge on the anions in the formula unit. Thus, K+ and NO3− ions combine in a 1:1 ratio to form KNO3 (potassium nitrate or saltpeter), a major ingredient in black gunpowder. Similarly, Ca2+ and SO42− form CaSO4 (calcium sulfate), which combines with varying amounts of water to form gypsum and plaster of Paris. The polyatomic ions NH4+ and NO3− form NH4NO3 (ammonium nitrate), a widely used fertilizer and, in the wrong hands, an explosive. One example of a compound in which the ions have charges of different magnitudes is calcium phosphate, which is composed of Ca2+ and PO43− ions; it is a major component of bones. The compound is electrically neutral because the ions combine in a ratio of three Ca2+ ions [3(+2) = +6] for every two ions [2(−3) = −6], giving an empirical formula of Ca3(PO4)2; the parentheses around PO4 in the empirical formula indicate that it is a polyatomic ion. Writing the formula for calcium phosphate as Ca3P2O8 gives the correct number of each atom in the formula unit, but it obscures the fact that the compound contains readily identifiable PO43− ions.Summary • There are two fundamentally different kinds of chemical bonds (covalent and ionic) that cause substances to have very different properties. • The composition of a compound is represented by an empirical or molecular formula, each consisting of at least one formula unit.Contributors The atoms in chemical compounds are held together by attractive electrostatic interactions known as chemical bonds. Ionic compounds contain positively and negatively charged ions in a ratio that results in an overall charge of zero. The ions are held together in a regular spatial arrangement by electrostatic forces. Most covalent compounds consist of molecules, groups of atoms in which one or more pairs of electrons are shared by at least two atoms to form a covalent bond. The atoms in molecules are held together by the electrostatic attraction between the positively charged nuclei of the bonded atoms and the negatively charged electrons shared by the nuclei. The molecular formula of a covalent compound gives the types and numbers of atoms present. Compounds that contain predominantly carbon and hydrogen are called organic compounds, whereas compounds that consist primarily of elements other than carbon and hydrogen are inorganic compounds. Diatomic molecules contain two atoms, and polyatomic molecules contain more than two. A structural formula indicates the composition and approximate structure and shape of a molecule. Single bonds, double bonds, and triple bonds are covalent bonds in which one, two, and three pairs of electrons, respectively, are shared between two bonded atoms. Atoms or groups of atoms that possess a net electrical charge are called ions; they can have either a positive charge (cations) or a negative charge (anions). Ions can consist of one atom (monatomic ions) or several (polyatomic ions). The charges on monatomic ions of most main group elements can be predicted from the location of the element in the periodic table. Ionic compounds usually form hard crystalline solids with high melting points. Covalent molecular compounds, in contrast, consist of discrete molecules held together by weak intermolecular forces and can be gases, liquids, or solids at room temperature and pressure. An empirical formula gives the relative numbers of atoms of the elements in a compound, reduced to the lowest whole numbers. The formula unit is the absolute grouping represented by the empirical formula of a compound, either ionic or covalent. Empirical formulas are particularly useful for describing the composition of ionic compounds, which do not contain readily identifiable molecules. Some ionic compounds occur as hydrates, which contain specific ratios of loosely bound water molecules called waters of hydration.

Got it ✅ I’ll create 4 simple sections of assignments based on these two pages (1.1 What is a network? and 1.2 Network connections). Total marks = 25. Suitable for Oxford International Primary Computing Grade 5. --- Assignment – Computer Networks Grade 5 – Total Marks: 25 --- Section A: Choose the Correct Answer (6 marks) Circle the correct option. Each question = 2 marks. 1. A group of computers connected together is called a: a) Website b) Network c) Software 2. Which type of network connects computers inside a school? a) LAN b) WAN c) Wi-Fi 3. To use a network safely, you need: a) A strong password b) A printer c) A hotspot --- Section B: Fill in the Blanks (6 marks) Each correct answer = 2 marks. 1. We can use a network to share files and ________. 2. A wireless connection is also called ________. 3. Network ________ help devices work together. --- Section C: Short Answer Questions (7 marks) 1. Write two advantages of using a network. (2 marks) 2. What is the difference between a wired connection and a wireless connection? (2 marks) 3. Write one rule to keep your password safe. (1 mark) 4. Create a strong password example using numbers and symbols. (2 marks) --- Section D: Activity / Problem Solving (6 marks) 1. Web Valley School has 60 network connections. Each cable is 50 meters long. How many meters of cable are used in total? (2 marks) 2. Convert your answer into kilometers. (2 marks) 3. Why is it important to hide or lock network equipment? (2 marks) --- ✅ Total = 25 marks --- Would you like me to also make a teacher’s marking guide with answers and mark distribution?

Generate all of these 25 questions Part A: Each correct answer is worth 5. 1. The regular pentagon shown has a side length of 2 cm. The perimeter of the pentagon is (A) 2 cm (B) 4 cm (C) 6 cm (D) 8 cm (E) 10 cm 2 cm 2. The faces of a cube are labelled with 1, 2, 3, 4, 5, and 6 dots. Three of the faces are shown. What is the total number of dots on the other three faces? (A) 6 (B) 8 (C) 10 (D) 12 (E) 15 3. The equation that best represents \a number increased by _ve equals 15" is (A) n 􀀀 5 = 15 (B) n _ 5 = 15 (C) n + 5 = 15 (D) n + 15 = 5 (E) n _ 5 = 15 4. The line graph shows the number of bobbleheads sold at a store each year. The sale of bobbleheads increased the most between (A) 2016 and 2017 (B) 2017 and 2018 (C) 2018 and 2019 (D) 2019 and 2020 (E) 2020 and 2021 Number of 2016 2017 2018 2019 2020 Year Sale of Bobbleheads 2021 Bobbleheads 20 40 60 80 5. Starting at 72, Aryana counts down by 11s: 72; 61; 50; : : : . What is the last number greater than 0 that Aryana will count? (A) 4 (B) 5 (C) 6 (D) 7 (E) 8 6. In the diagram, \ABC = 90_. The value of x is (A) 68 (B) 23 (C) 56 (D) 28 (E) 26 Day of the Week 44° x° A B C x° 7. Which of the following values is closest to zero? (A) 􀀀1 (B) 5 4 (C) 12 (D) 􀀀4 5 (E) 0:9 Grade 8 8. A jar contains 267 quarters. One quarter is worth $0.25. How many quarters must be added to the jar so that the total value of the quarters is $100.00? (A) 33 (B) 53 (C) 103 (D) 133 (E) 153 9. A package of 8 greeting cards comes with 10 envelopes. Kirra has 7 cards but no envelopes. What is the smallest number of packages that Kirra needs to buy to have more envelopes than cards? (A) 3 (B) 4 (C) 5 (D) 6 (E) 7 10. For the points in the diagram, which statement is true? (A) e > c (B) b < d (C) f > b (D) a < e (E) a > c y x (e, f ) (a, b) (c, d ) Part B: Each correct answer is worth 6. 11. The 26 letters of the English alphabet are listed in an in_nite, repeating loop: ABCDEFGHIJKLMNOPQRSTUVWXY ZABC : : : What is the 258th letter in this sequence? (A) V (B) W (C) X (D) Y (E) Z 12. A public holiday is always celebrated on the third Wednesday of a certain month. In that month, the holiday cannot occur on which of the following days? (A) 16th (B) 22nd (C) 18th (D) 19th (E) 21st 13. A circular spinner is divided into three sections. An arrow is attached to the centre of the spinner. The arrow is spun once. The probability that the arrow stops on the largest section is 50%. The probability it stops on the next largest section is 1 in 3. The probability it stops on the smallest section is (A) 1 4 (B) 2 5 (C) 1 6 (D) 2 7 (E) 3 10 14. A positive number is divisible by both 3 and 4. The tens digit is greater than the ones digit. How many positive two-digit numbers have this property? (A) 4 (B) 5 (C) 6 (D) 7 (E) 8 15. A rectangular pool measures 20 m by 8 m. There is a 1 m wide walkway around the outside of the pool, as shown by the shaded region. The area of the walkway is (A) 56 m2 (B) 60 m2 (C) 29 m2 (D) 52 m2 (E) 50 m2 20 m 8 m 1 m Grade 8 16. The results of asking 50 students if they participate in music or sports are shown in the Venn diagram. What percentage of the 50 students do not participate in music and do not participate in sports? (A) 0% (B) 80% (C) 20% (D) 70% (E) 40% Music Sports 15 5 20 17. There are 2 3 as many golf balls in Bin F as in Bin G. If there are a total of 150 golf balls, how many fewer golf balls are in Bin F than in Bin G? (A) 15 (B) 30 (C) 50 (D) 60 (E) 90 18. In the sequence shown, Figure 1 is formed using 7 squares. Each _gure after Figure 1 has 5 more squares than the previous _gure. What _gure has 2022 squares? (A) Figure 400 (B) Figure 402 (C) Figure 404 (D) Figure 406 (E) Figure 408 Figure 1 Figure 2 Figure 3 19. Mateo's 300 km trip from Edmonton to Calgary passed through Red Deer. Mateo started in Edmonton at 7 a.m. and drove until stopping for a 40 minute break in Red Deer. Mateo arrived in Calgary at 11 a.m. Not including the break, what was his average speed for the trip? (A) 83 km/h (B) 94 km/h (C) 90 km/h (D) 95 km/h (E) 64 km/h 20. Equilateral triangle ABC has sides of length 4. The midpoint of BC is D, and the midpoint of AD is E. The value of EC2 is (A) 7 (B) 6 (C) 6:25 (D) 8 (E) 10 Part C: Each correct answer is worth 8. 21. The positive factors of 6 are 1, 2, 3, and 6. There are two perfect squares less than 100 that have exactly _ve positive factors. What is the sum of these two perfect squares? (A) 177 (B) 80 (C) 145 (D) 52 (E) 97 22. In the list p; q; r; s; t; u; v, each letter represents a positive integer. The sum of the values of each group of three consecutive letters in the list is 35. If q + u = 15, then p + q + r + s + t + u + v is (A) 85 (B) 70 (C) 80 (D) 90 (E) 75 Grade 8 23. The net shown is folded to form a cube. An ant walks from face to face on the cube, visiting each face exactly once. For example, ABCFED and ABCEFD are two possible orders of faces the ant visits. If the ant starts at A, how many possible orders are there? (A) 24 (B) 48 (C) 32 (D) 30 (E) 40 A D B C E F 24. The number 385 is an example of a three-digit number for which one of the digits is the sum of the other two digits. How many numbers between 100 and 999 have this property? (A) 144 (B) 126 (C) 108 (D) 234 (E) 64 25. Student A, Student B, and Student C have been hired to help scientists develop a new avour of juice. There are 4200 samples to test. Each sample either contains blueberry or does not. Each student is asked to taste each sample and report whether or not they think it contains blueberry. Student A reports correctly on exactly 90% of the samples containing blueberry and reports correctly on exactly 88% of the samples that do not contain blueberry. The results for all three students are shown below. Student A Student B Student C Percentage correct on samples 90% 98% (2m)% containing blueberry Percentage correct on samples 88% 86% (4m)% not containing blueberry Student B reports 315 more samples as containing blueberry than Student A. For some positive integers m, the total number of samples that the three students report as containing blueberry is equal to a multiple of 5 between 8000 and 9000. The sum of all such values of m is (A) 45 (B) 36 (C) 24 (D) 27 (E) 29

Chapter 22 Antihypertensive Drugs Hypertension Defined (JNC-8) Pharmacology Overview 7 main categories of drugs to treat HTN Adrenergic drugs (old friend) Angiotensin-converting enzyme (ACE) inhibitors Angiotensin II receptor blockers (ARBs) Calcium channel blockers (CCBs) Diuretics Vasodilators Direct renin inhibitors A. Adrenergic Drugs: 5 Subcategories and where they act A1. Adrenergic neuron blockers (central and peripheral)- we won’t talk about this A2. Alpha1 receptor blockers (peripheral) A3. Alpha2 receptor agonists (central) A4. Beta receptor blockers (peripheral) A5. Combined α and β receptor blockers (peripheral) A2. Peripherally Acting Adrenergic DrugAlpha1 Blockers (we’ve met these) Doxazosin, prazosin, alfuzosin Block alpha1-receptors which causes BP to decrease Reduces peripheral vascular resistance and BP by dilating both arterial and venous blood vessels Main Use: benign prostatic hyperplasia (BPH) Alpha1 Blockers REMEMBER Tamsulosin (Flomax)* is an α1 blocker BUT *Tamsulosin is not used to control BP, just for BPH. A3. Centrally Acting Adrenergic DrugsAlpha 2 agonist Clonidine and methyldopa 1- Stimulate alpha2-adrenergic receptors. in the brain Decreases sympathetic outflow from the CNS which decreases NE production 2. Stimulate alpha2-adrenergic receptors in kidneys remember alpha 2 opposes alpha 1 Dilates peripheral blood vessels → lowers peripheral resistance → Results in decreased BP So ….Clonidine (Catapres) Used primarily for its ability to decrease blood pressure in an urgent setting Also use in opioid withdrawal as previously discussed Oral (multiple times a day), and topical patch formulations Do not stop abruptly as it may lead to rebound hypertension In reality, Clonidine and methyldopa Not prescribed as first-line home antiHTN drugs High incidence of unwanted adverse effects: orthostatic hypotension, fatigue, and dizziness MIGHT be uses as adjunct drugs after other drugs have failed, in conjunction with other antiHTN such as diuretics A4. Adrenergic Drugs Selective Beta 1 Blockers Metoprolol, Atenolol Reduction of HR through β1 receptor blockade (remember adrenergic blocking of this receptor???) HR results in BP Cause reduced secretion of renin = BP A4. Adrenergic Drugs Selective Beta1 Blockers Nebivolol (Bystolic) Uses: hypertension and HF Action: blocks β1 receptors and produces vasodilatation, which results in a decrease in SVR High doses loses selectivity and blocks both β1 and β2 Less sexual dysfunction All BB- Do not stop abruptly; must be tapered over 1 to 2 weeks A4. Adrenergic Drugs NONSelective Beta Blockers Propranolol Acts equally on β1 and β2 Other uses include situational anxiety associated with public speaking, test taking As mentioned on previous slide, nebivolol at high doses becomes beta nonselective A5. Dual-Action Adrenergic Drugs α1 and β Receptor Blockers Dual antihypertensive effects of reduction in heart rate (beta1 receptor blockade) and vasodilation (alpha1 receptor blockade) Examples are carvedilol (common) and labetalol (not as common) A5. Dual-Action Adrenergic Drugs α1 and β Receptor Blockers Carvedilol (Coreg) Widely used drug that is well tolerated Uses: HTN, mild to moderate HF in conjunction with digoxin, diuretics, and ACE inhibitors Contraindications: severe bradycardia or unstable HF, bronchospastic conditions such as asthma, and various cardiac conduction problems Adrenergic Drugs Indications - HTN But also for Glaucoma (topical) BPH: doxazosin, prazosin, and terazosin (2 for 1) Management of severe HF when used with cardiac glycosides and diuretics Contraindications Acute HF- have to stabilize first MOAIs- yeah doesn’t everything interact with MAOIs? Peptic ulcers Severe liver/kidney disease Asthma (with beta blockers) Adrenergic Drugs: Adverse Effects Orthostatic hypotension 1st-dose syncope Rebound hypertension with abrupt discontinuation Most common: Dry mouth, drowsiness, constipation, sedation Interactions- always check for specific drug interactions Can cause additive CNS depression with alcohol, benzodiazepines, opioids Question #1 When administering an alpha-adrenergic drug for hypertension, it is most important for the nurse to assess the patient for the development of what response? Hypotension Hyperkalemia Oliguria Respiratory distress Answer A Hypotension This is a key point in patient education These drugs have strong vasodilating properties and may cause severe hypotension, especially at the beginning of therapy. B. Angiotensin-Converting Enzyme Inhibitorsaka ACE Inhibitors or ACEi Large group of safe and effective drugs Currently are 10 ACEi Often used as first-line drugs for HF and hypertension May be combined with a thiazide diuretic, loop diuretic, or Calcium Channel Blocker (CCB) You need to understand the basics ACE Inhibitors: Review RAAS ACE converts angiotensin I, formed through the action of renin, to angiotensin II Angiotensin 2 is a potent vasoconstrictor and also induces aldosterone secretion by the adrenal glands Aldosterone stimulates sodium resorption (H20 follows Na Both act to raise BP which causes kidneys to reduce renin production ACEi= Great drug to treat HTN BUT contraindicated in pregnancy (2nd,3rd trimester due to fetal renal damage) and breastfeeding first few weeks after birth B. ACE Inhibitors - PRIL Lisinopril (Prinivil) super common, often the 1st drug Enalapril (Vasotec) also common Captopril (Capoten) great if liver disease present Benazepril (Lotensin) Fosinopril (Monopril) Perindopril (Aceon) Quinapril (Accupril) Ramipril (Altace) Trandolapril (Mavik) Primary Effects of the ACE Inhibitors Prevent Na (and H2O) resorption by inhibiting aldosterone secretion (volume reduction) (GO BACK TO RAAS DIAGRAM) blood volume decreases work of the heart preload, or the left ventricular end-diastolic volume which is important in HF ACE SUMMARY OF ACTIVITY 1) Prevent vasoconstriction caused by angiotensin 2 (2) Prevent aldosterone secretion  less sodium and water resorption Cardioprotective Effects of ACEi They slow progression of left ventricular hypertrophy (ventricular remodeling) after MI so considered cardioprotective ACE inhibitors have been shown to decrease morbidity and mortality in patients with HF Renal Protective Effects of ACEi ACE inhibitors: reduce glomerular filtration pressure by volume reduction Cardiovascular drug of choice for patients with diabetes since it helps protect kidneys by reducing pressure. Sometimes used low dose for kidney protection with DM without HTN B. ACEi Enalapril (Vasotec) Only ACEi available in both oral and IV Enalapril IV does not require cardiac monitoring Oral enalapril: prodrug (metabolized in liver) Improves patient’s chances of survival after an MI Reduces the incidence of HF B. ACEi Captopril (Capoten) Uses: prevention of ventricular remodeling after MI; reduce the risk of HF after MI Shortest half-life Must be administered multiple times throughout the day so this limits its use Not a prodrug so good for patient with liver disease Question #2 A patient with diabetes has a new prescription for the ACE inhibitor lisinopril. She questions this order because her provider has never told her that she has hypertension. What is the best explanation for this order? The doctor knows best The patient is confused This medication has cardioprotective properties This medication has a protective effect on the kidneys for patients with diabetes Answer D ACE inhibitors have been shown to have a protective effect on the kidneys because they reduce glomerular filtration pressure. This property makes them the cardiovascular drug of choice for patients with diabetes. Question #3 A patient with a history of pancreatitis and cirrhosis is also being treated for hypertension. Which drug will most likely be ordered for this patient? Clonidine Prazosin Diltiazem Captopril Answer D Captopril Captopril is not a prodrug; therefore, it does not need to be metabolized by the liver to be effective. This is an advantage in patients with liver disease. ACE Inhibitors: Adverse Effects *Dry, nonproductive cough, which reverses when therapy is stopped. This is a class effect Dizziness- Note: First-dose hypotensive effect may occur Headache & Fatigue Possible hyperkalemia ** Angioedema: rare but potentially fatal Not safe in pregnancy-are contraindicated during the second and third trimesters of pregnancy because of increased risk of fetal renal damage C. Angiotensin II Receptor Blockers(ARB) Considered an alternative to ACEi Less likely to cause a dry cough and hyper K+ that is common with ACE inhibitors Angiotensin II Receptor Blockers: Mechanism of Action Go back to RAAS diagram! ARBs affect primarily 2 places 1. Vascular smooth muscle - blocks vasoconstriction 2. Adrenal gland -Selectively blocks the binding of Ang 2 to certain Ang 2 receptors inhibiting secretion of aldosterone Lowers volume retention and BP Angiotensin II Receptor Blockers -ARTAN Losartan (Cozaar)- very common Eprosartan (Teveten) Valsartan (Diovan) Irbesartan (Avapro) Candesartan (Atacand) Olmesartan (Benicar) Telmisartan (Micardis) Azilsartan (Edarbi) C. ARB Losartan (Cozaar) Beneficial in patients with HTN and HF Used with caution in patients with kidney or liver dysfunction and in patients with renal artery stenosis ***Not safe for breastfeeding women and should not be used in pregnancy (Cat C 1st trimester, Cat D 2nd-3rd trimester), potential fetal toxicity Appear to be equally effective for the treatment of hypertension and well tolerated ARBs less likely to cause cough and hyperK+ but can still happen Evidence that ARBs are associated with lower mortality after MI than ACE inhibitors Never take ACEi and ARBs at the same time* 5. Calcium Channel Blockers (CCB) Primary use: HTN, angina, some dysrhythmias Cause smooth muscle relaxation by blocking the binding of calcium to its receptors, preventing muscle contraction Results in: Relaxed blood vessels to the heart Decreased peripheral smooth muscle tone Decreased SVResistance Decreased BP E. Diuretics First-line antiHTN in JNC 8 guidelines Decreases fluid volume The results from diuresis: preload, Peripheral resistance Overall effect  Decreased workload of the heart and decreased BP Thiazide diuretics are the most commonly used diuretics for HTN Ie hydrochlorothiazide (HCTZ), chlorthalidone We will discuss diuretics further in the chapter on diuretics F. Vasodilators Directly relax arterial or venous smooth muscle (or both) Results in: Decreased SVR Decreased afterload Peripheral vasodilation Indicated for treatment of HTN May be used in combination with other drugs F. Vasodilators Hydralazine (Apresoline) Orally: routine cases of essential hypertension Injectable: hypertensive emergencies BiDil: specifically indicated as an adjunct for treatment of HF in African-American patients F. Vasodilators Sodium Nitroprusside (Nitropress) *Sodium nitroprusside and IV diazoxide are reserved for the management of hypertensive emergencies. Contraindications: severe HF, known inadequate cerebral perfusion (especially during neurosurgical procedures) F. Vasodilators Adverse Effects Hydralazine: dizziness, headache, tachycardia, edema, dyspnea, N/V/D, vitamin B6 deficiency, rash Sodium nitroprusside: hypotension, bradycardia, decreased platelet aggregation, rash G. Direct Renin Inhibitors Aliskirin (Tekturna) Blocks the RAS pathway at the point of activation. Inhibiting renin production prevents the downstream production of Ang II (potent vasoconstrictor) Adverse effects: N/V, severe hypotension, hyponatremia, hyperkalemia… Contraindicated in patients with DM taking ACEi or ARB Miscellaneous Antihypertensives Eplerenone (Inspra) Newer class of drugs called selective aldosterone blockers (remember RAAS?) Reduces BP by blocking the actions of aldosterone at its corresponding receptors in the kidney, heart, blood vessels, and brain Indications: routine treatment of hypertension and for post-MI HF Contraindicated if serum potassium levels are high (above 5.6 mEq/L) A Special Form of HTNTreatment of Pulmonary Hypertension Sildenafil and Tadalafil Commonly used for erectile dysfunction Used for pulmonary hypertension but with different trade names Sildenafil: Revatio* (Viagra for ED) Tadalafil: Adcirca* (Cialis for ED)

Ions Ions are charged substances that have formed through the gain or loss of electrons. Cations form from the loss of electrons and have a positive charge while anions form through the gain of electrons and have a negative charge. Cation Formation Cations are the positive ions formed by the loss of one or more electrons. The most commonly formed cations of the representative elements are those that involve the loss of all of the valence electrons. Consider the alkali metal sodium (Na) . It has one valence electron in the n=3 energy level. Upon losing that electron, the sodiu ion now has an octet of electrons from the second energy level and a charge of 1+ . The electron arrangement of the sodium ion is now the same as that of the noble gas neon. Consider a similar process with magnesium and aluminum. In this case, the magnesium atom loses its two valence electrons in order to achieve the same arrangement as the noble gas neon and a charge of 2+ . The aluminum atom loses its three valence electrons to have the same electron arrangement as neon and a charge of 3+ . For representative elements under typical conditions, three electrons is usually the maximum number that will be los. Representative elements will not lose electrons beyond their valence because they would have to "break" the octet of the previous energy level which provides stability to the ion. Anions Anions are the negative ions formed from the gain of one or more electrons. When nonmetal atoms gain elections, they often do so until their outermost principal energy level achieves an octet. For fluorine, which has an electron arrangement of (2, 7), it only needs to gain one electron to have the same electron arrangement as neon. Forming an octet (eight electrons in the outer shell) provides stability to the atom. Fluorine will gain one electron and have a charge of 1− . The electron arrangement of the fluoride ion (2, 8) will also change to reflect the gain of an electron. Oxygen has an electron arrangement of (2, 6) and needs to gain two electrons to fill the n=2 energy level and achieve an octet of electrons in the outermost shell. The oxide ion will have a charge of 2− as a result of gaining two electrons. Under typical conditions, three electrons is the maximum that will be gained in the formation of anions. Subatomic Particles in an Ion Since ions form from the gain or loss of electrons, we can also look at the number of subatomic particles (protons, neutrons, and electrons) found in an ion. Remember that the number of protons determines the identity of the element and will not change in a chemical process. Example 2.5.1 How many protons, neutrons, and electrons in a single oxide (O2−) ion? Solution Oxygen has the atomic number 8 so both the atom and the ion will have 8 protons. The average atomic mass of oxygen is 16. Therefore, there will be 8 neutrons (atomic mass−atomic number=neutrons) . A neutral oxygen atom would have 8 electrons. However, the anion has gained two electrons so O2− has 10 electrons. We can also use information about the subatomic particles to determine the identity of an ion. Example 2.5.2 An ion with a 2+ charge has 18 electrons. Determine the identity of the ion. Solution If an ion has a 2+ charge then it must have lost electrons to form the cation. If the ion has 18 electrons and the atom lost 2 to form the ion, then the neutral atom contained 20 electrons. Since it was neutral, it must also have had 20 protons. Therefore the element is calcium. Polyatomic Ions A polyatomic ion is an ion composed of two or more atoms that have a charge as a group (poly = many). The ammonium ion (see figure below) consists of one nitrogen atom and four hydrogen atoms. Together, they comprise a single ion with a 1+ charge and a formula of NH+4 . The hydroxide ion (see figure below) contains one hydrogen atom and one oxygen atom with an overall charge of 1− . The carbonate ion (see figure below) consists of one carbon atom and three oxygen atoms and carries an overall charge of 2− . The formula of the carbonate ion is CO2−3 . The atoms of a polyatomic ion are tightly bonded together and so the entire ion behaves as a single unit. The figures below show several examples. Soult Screenshot 2-2-1.png Figure 2.5.1 : The ammonium ion (NH+4) is a nitrogen atom (blue) bonded to four hydrogen atoms (white). Soult Screenshot 2-2-2.png Figure 2.5.2 : The hydroxide ion (OH−) is an oxygen atom (red) bonded to a hydrogen atom. Soult Screenshot 2-2-3.png Figure 2.5.3 : The carbonate ion (CO2−3) is a carbon atom (black) bonded to three oxygen atoms. The table below lists a number of polyatomic ions by name and by structure. The heading for each column indicates the charge on the polyatomic ions in that group. Note that the vast majority of the ions listed are anions - there are very few polyatomic cations. 1− 2− 3− 1+ Table 2.5.1 : Common Polyatomic Ions acetate, CH3COO− carbonate, CO2−3 arsenate, AsO3−3 ammonium, NH+4 bromate, BrO−3 chromate, CrO2−4 phosphite, PO3−3 chlorate, ClO−3 dichromate, Cr2O2−7 phosphate, PO3−4 chlorite, ClO−2 hydrogen phosphate, HPO2−4 cyanide, CN− oxalate, C2O2−4 dihydrogen phosphate, H2PO−4 peroxide, O2−2 hydrogen carbonate, HCO−3 silicate, SiO2−3 hydrogen sulfate, HSO−4 sulfate, SO2−4 hydrogen sulfide, HS− sulfite, SO2−3 hydroxide, OH− hypochlorite, ClO− nitrate, NO−3 nitrite, NO−2 perchlorate, ClO−4 permanganate, MnO−4 The vast majority of polyatomic ions are anions, many of which end in -ate or -ite. Notice that in some cases such as nitrate (NO−3) and nitrite (NO−2) , there are multiple anions that consist of the same two elements. In these cases, the difference between the ions is the number of oxygen atoms present, while the overall charge is the same. As a class, these are called oxyanions. When there are two oxyanions for a particular element, the one with the greater number of oxygen atoms gets the -ate suffix, while the one with the fewer number of oxygen atoms gets the -ite suffix. The four oxyanions of chlorine are shown below, which also includes the use of the prefixes hypo- and per-. ClO− , hypochlorite ClO−2 , chlorite ClO−3 , chlorate ClO−4 , perchlorate Not your usual ion Soult Screenshot 2-2-4.png "Drink you milk. It's good for your bones." We're told this from early childhood, and with good reason. Milk contains a good supply of calcium, part of the structure of bone. However, there are two other ionic components of hydroxyapatite, the mineral component. Phosphate ion and hydroxide ion make up the remainder of the inorganic material in bone. News You Can Use Bone is a very complex structure. It is composed of protein (mainly collagen), hydroxyapatite (a calcium-phosphate-hydroxide mixture), some other minerals, and contains 10 - 20% water. The calcium/phosphate ratios are not stoichiometric, but vary somewhat from one portion of bone to the next. Bones are very strong but will break under enough stress. Regular exercise and proper nutrition help to increase bone strength. Watch a video about bone structure at http://www.youtube.com/watch?v=d9owEvYdouk Nitrate is an anion with a complex bonding structure. Major sources for this ion in drinking water are runoff from fertilizer, septic tank leakage, sewage, and natural deposits. High concentrations of nitrates represent a significant health hazard, especially to infants. The nitrate in the body is converted to nitrite, which then binds to hemoglobin. This binding decreases the ability of hemoglobin to transport oxygen, thus depriving the cells of the O2 needed for proper functioning. Cyanide production is widespread throughout nature. Forest fires will produce significant amounts of cyanide. Many plants contain cyanide, and it is produced by a number of bacteria, algae, and fungi. Cyanide is used industrially in metal finishing, iron and steel mills, and in organic synthesis processes. This material is also an important component for the refining of precious metals. Formation of a complex between cyanide and gold allows extraction of this metal from a mixture.

Related quizzes

Related quizzes