Match the following components with their function.

Match the following components with their function.

Match the following components with their function.

To install the motherboard inside the computer casing, you need a wrench.

Install the CPU, heat sink fan, RAM modules and graphics card first in the motherboard, before installing the motherboard inside the casing.

12-pin power connector gives primary power to the motherboard.

The first step in computer assembly is to connect the disk drives to the motherboard.

We should never exert too much force when attaching cables to avoid damaging their pins.

Hold the components on the edges and while touching the Integrated Circuit (IC) parts.

Pins indicated by Power +/- is the positive / negative LED that controls the power light and indicates the power is on.

You cannot install a motherboard in the casing with only two screws.

The motherboard sits on elevated screw holes or spacers to keep it from touching the case.

A header is a connector on a motherboard that consists of pins that stick up from the board.

In assembling a computer system unit, is this sequence correct? 

Prepare your workspace > Install the CPU > Install the heat sink fan

In assembling a computer system unit, is this sequence correct? 

Connect power supply cables > Install RAM> Install graphics card

In assembling a computer system unit, is this sequence correct? 

Install storage drives > Install the graphics card > Connect the front panel connectors

In assembling a computer system unit, is this sequence correct? 

Check connections and cable management > Close the case > Install the motherboard inside the case

In assembling a computer system unit, is this sequence correct? 

Connect peripherals (monitor, mouse, etc.) > Power on > Test computer operations