What is the primary function of the skin in the integumentary system?

Protection from invasion and injury

What is the function of sebaceous glands in the integumentary system?

Secrete sebum to lubricate the skin and hair

What part of the hair follicle supplies nutrients to the hair?

Capillaries at the base of the bulb

What is the function of sudoriferous glands?

Homeostasis of body temperature

What is the primary function of the skin?

Protection from invasion and injury

What is the function of sebaceous glands?

Secrete sebum to lubricate the skin and hair

What role do hair follicles play in the integumentary system?

Nourishment and growth of hair shaft

What type of tissue primarily makes up the hypodermis?

Loose connective tissue (adipose)

Dense regular connective tissue

IDENTIFY THE MAIN STRUCTURE AND FUNCTIONS OF THE INTEGUMENTARY SYSTEM

What is a Plant Cell? Plant cells are eukaryotic cells that vary in several fundamental factors from other eukaryotic organisms. Both plant and animal cells contain a nucleus along with similar organelles. One of the distinctive aspects of a plant cell is the presence of a cell wall outside the cell membrane. Plant Cell Structure Just like different organs within the body, plant cell structure includes various components known as cell organelles that perform different functions to sustain itself. These organelles include: Cell Wall It is a rigid layer which is composed of polysaccharides cellulose, pectin and hemicellulose. It is located outside the cell membrane. It also comprises glycoproteins and polymers such as lignin, cutin, or suberin. The primary function of the cell wall is to protect and provide structural support to the cell. The plant cell wall is also involved in protecting the cell against mechanical stress and providing form and structure to the cell. It also filters the molecules passing in and out of it. The formation of the cell wall is guided by microtubules. It consists of three layers, namely, primary, secondary and the middle lamella. The primary cell wall is formed by cellulose laid down by enzymes. Cell membrane It is the semi-permeable membrane that is present within the cell wall. It is composed of a thin layer of protein and fat. The cell membrane plays an important role in regulating the entry and exit of specific substances within the cell. For instance, cell membrane keeps toxins from entering inside, while nutrients and essential minerals are transported across. Nucleus The nucleus is a membrane-bound structure that is present only in eukaryotic cells. The vital function of a nucleus is to store DNA or hereditary information required for cell division, metabolism and growth. 1. Nucleolus: It manufactures cells’ protein-producing structures and ribosomes. 2. Nucleopore: Nuclear membrane is perforated with holes called nucleopore that allow proteins and nucleic acids to pass through. Plastids They are membrane-bound organelles that have their own DNA. They are necessary to store starch and to carry out the process of photosynthesis. It is also used in the synthesis of many molecules, which form the building blocks of the cell. Some of the vital types of plastids and their functions are stated below: Leucoplasts They are found in the non-photosynthetic tissue of plants. They are used for the storage of protein, lipid and starch. Chromoplasts They are heterogeneous, colored plastid which is responsible for pigment synthesis and for storage in photosynthetic eukaryotic organisms. Chromoplasts have red-, orange- and yellow-colored pigments which provide color to all ripe fruits and flowers. Central Vacuole It occupies around 30% of the cell’s volume in a mature plant cell. Tonoplast is a membrane that surrounds the central vacuole. The vital function of the central vacuole apart from storage is to sustain turgor pressure against the cell wall. The central vacuole consists of cell sap. It is a mixture of salts, enzymes and other substances. Golgi Apparatus They are found in all eukaryotic cells, which are involved in distributing synthesized macromolecules to various parts of the cell. Ribosomes They are the smallest membrane-bound organelles which comprise RNA and protein. They are the sites for protein synthesis, hence, also referred to as the protein factories of the cell. Mitochondria They are the double-membraned organelles found in the cytoplasm of all eukaryotic cells. They provide energy by breaking down carbohydrate and sugar molecules, hence they are also referred to as the “Powerhouse of the cell.” Lysosome Lysosomes are called suicidal bags as they hold digestive enzymes in an enclosed membrane. They perform the function of cellular waste disposal by digesting worn-out organelles, food particles and foreign bodies in the cell. In plants, the role of lysosomes is undertaken by the vacuoles. Chloroplasts It is an elongated organelle enclosed by phospholipid membrane. The chloroplast is shaped like a disc and the stroma is the fluid within the chloroplast that comprises a circular DNA. Each chloroplast contains a green colored pigment called chlorophyll required for the process of photosynthesis. The chlorophyll absorbs light energy from the sun and uses it to transform carbon dioxide and water into glucose. Structure of Chloroplast Chloroplasts are found in all higher plants. It is oval or biconvex, found within the mesophyll of the plant cell. The size of the chloroplast usually varies between 4-6 µm in diameter and 1-3 µm in thickness. They are double-membrane organelle with the presence of outer, inner and intermembrane space. There are two distinct regions present inside a chloroplast known as the grana and stroma. • Grana are made up of stacks of disc-shaped structures known as thylakoids or lamellae. The granum of the chloroplast consists of chlorophyll pigments and are the functional units of chloroplasts. • Stroma is the homogenous matrix which contains grana and is similar to the cytoplasm in cells in which all the organelles are embedded. Stroma also contains various enzymes, DNA, ribosomes, and other substances. Stroma lamellae function by connecting the stacks of thylakoid sacs or grana. The chloroplast structure consists of the following parts: Membrane Envelope It comprises inner and outer lipid bilayer membranes. The inner membrane separates the stroma from the intermembrane space. Intermembrane Space The space between inner and outer membranes. Thylakoid System (Lamellae) The system is suspended in the stroma. It is a collection of membranous sacs called thylakoids or lamellae. The green colored pigments called chlorophyll are found in the thylakoid membranes. It is the sight for the process of light-dependent reactions of the photosynthesis process. The thylakoids are arranged in stacks known as grana and each granum contains around 10-20 thylakoids. Stroma It is a colorless, alkaline, aqueous, protein-rich fluid present within the inner membrane of the chloroplast present surrounding the grana. Grana Stack of lamellae in plastids is known as grana. These are the sites of conversion of light energy into chemical energy. Chlorophyll It is a green photosynthetic pigment that helps in the process of photosynthesis. Functions of Chloroplast Following are the important chloroplast functions: • The most important function of the chloroplast is to synthesize food by the process of photosynthesis. • Absorbs light energy and converts it into chemical energy. • Chloroplast has a structure called chlorophyll which functions by trapping the solar energy and is used for the synthesis of food in all green plants. • Produces NADPH and molecular oxygen (O 2 ) by photolysis of water. • Produces ATP – Adenosine triphosphate by the process of photosynthesis. • The carbon dioxide (CO2) obtained from the air is used to generate carbon and sugar during the Calvin Cycle or dark reaction of photosynthesis. Mitochondria “Mitochondria are membrane-bound organelles present in the cytoplasm of all eukaryotic cells, that produce adenosine triphosphate (ATP), the main energy molecule used by the cell.” What are Mitochondria? Popularly known as the “Powerhouse of the cell,” mitochondria (singular: mitochondrion) are a double membrane-bound organelle found in most eukaryotic organisms. They are found inside the cytoplasm and essentially function as the cell’s “digestive system.” They play a major role in breaking down nutrients and generating energy-rich molecules for the cell. Many of the biochemical reactions involved in cellular respiration take place within the mitochondria. The term ‘mitochondrion’ is derived from the Greek words “mitos” and “chondrion” which means “thread” and “granules-like”, respectively. It was first described by a German pathologist named Richard Altmann in the year 1890. Structure of Mitochondria • The mitochondrion is a double-membraned, rod-shaped structure found in both plant and animal cell. • Its size ranges from 0.5 to 1.0 micrometers in diameter. • The structure comprises an outer membrane, an inner membrane, and a gel-like material called the matrix. • The outer membrane and the inner membrane are made of proteins and phospholipid layers separated by the intermembrane space. • The outer membrane covers the surface of the mitochondrion and has a large number of special proteins known as porins. Cristae The inner membrane of mitochondria is rather complex in structure. It has many folds that form a layered structure called cristae, and this helps in increasing the surface area inside the organelle. The cristae and the proteins of the inner membrane aid in the production of ATP molecules. The inner mitochondrial membrane is strictly permeable only to oxygen and ATP molecules. A number of chemical reactions take place within the inner membrane of mitochondria. Mitochondrial Matrix The mitochondrial matrix is a viscous fluid that contains a mixture of enzymes and proteins. It also comprises ribosomes, inorganic ions, mitochondrial DNA, nucleotide cofactors, and organic molecules. The enzymes present in the matrix play an important role in the synthesis of ATP molecules. Functions of Mitochondria The most important function of mitochondria is to produce energy through the process of oxidative phosphorylation. It is also involved in the following process: 1. Regulates the metabolic activity of the cell 2. Promotes the growth of new cells and cell multiplication 3. Helps in detoxifying ammonia in the liver cells 4. Plays an important role in apoptosis or programmed cell death 5. Responsible for building certain parts of the blood and various hormones like testosterone and estrogen 6. Helps in maintaining an adequate concentration of calcium ions within the compartments of the cell 7. It is also involved in various cellular activities like cellular differentiation, cell signaling, cell senescence, controlling the cell cycle and in cell growth. Disorders Associated with Mitochondria Any irregularity in the way mitochondria function can directly affect human health, but often, it is difficult to identify because symptoms differ from person to person. Disorders of the mitochondria can be quite severe; in some cases, they can even cause an organ to fail.

LESSON 4. Cellular Respiration • Define cellular respiration • Identify the stages of clan respiration You have just learned how the energy from the sun is captured, processed, and stored in the form of glucose. Cellular respiration, another important life process, is the means by which cells release the stored energy in glucose to make adenosine triphosphate (ATP). The primary goal of this life process is to convert stored energy into usable form, such as ATP, for the cells to carry out their functions. Cellular respiration involves several chemical reactions. The reactions can be summed up in the following equation: C6 H12 O6 + 602 ----- 6 CO₂ +6H₂O + ATP Glucose oxygen carbon dioxide water energy Aerobic respiration reactions, or cellular respiration that takes place in the presence of oxygen, can be grouped into three stages glycolysis, Krebs cycle, and electron transport chain (ETC). Stage 1: Glycolysis Glycolysis is the process that breaks down one molecule of 6-C glucose into 3-C pyruvates or pyruvic acids. It also releases four molecules of ATP. This process occurs in the cytoplasm of the cell. The following is the step-by-step process of glycolysis. Take note that several enzymes are involved in this process. 1. The first step of glycolysis requires energy. It can only proceed when the two ATP molecules donate energy to the glucose by transferring a phosphate group with the help of an enzyme, producing glucose 6-phosphate 2. Then, a specific enzyme promotes the rearrangement of the atoms, producing the fructose 6-phosphate. 3. The action of the enzyme in step 2 promotes the transfer of a phosphate group from another ATP molecule, forming fructose 1,6-bisphosphate. 4. The resulting fructose 1,6-bisphosphate molecules, with the help of another enzyme, splits into two molecules, each with three carbon backbones. These two sugars are dihydroxyacetone phosphate and glyceraldehyde 3-phosphate. 5. Another important enzyme then rapidly interconverts the molecules of dihydro-xyacetone phosphate and glyceraldehyde 3-phosphate. This produces two molecules of glyceraldehyde 3-phosphate or 3-phosphoglyceraldehyde (PGAL) 6. The succeeding step involves another enzyme-mediated action. The hydrogen (H) from PGAL is transferred to the oxidizing agent, nicotinamide adenine dinucleotide (NAD), which forms NADH. A phosphate (P) is also added from the cytosol of the cell to oxidize the two molecules of PGAL, forming two 1.3-bisphosphoglycerate. 7. A phosphate (P) from 1,3-biphosphoglycerate is transferred to ADP to form ATP. This happens for each of the two 1,3-bisphosphoglycerate. resulting to a yield of two ATP and two 3-phosphoglycerate molecules. 8. A phosphate is transferred from 3-phosphoglycerate molecules from the third carbon to the second carbon, forming 2-phosphoglycerate molecules A hydrogen atom and a hydroxyl ((OH) group is released, which then combines to form water (H2O). The removal of H2O from 2-phosphoglycerate results in the formation of 2- phosphoglycerate molecules. 9. A hydrogen atom and a hydroxyl ((OH) group is released, which then combines to form water (H2O). The removal of H2O from 2-phosphoglycerate results in the formation of two phosphoenolpyruvic acid (PEP) 10. Phosphate (P) from PEP is transferred to ADP (and forms ATP) and the final product, pyruvic acid. This reaction yields two molecules of pyruvic acid and two ATP molecules In summary, a single glucose molecule that undergoes the process of glycolysis produces two molecules of pyruvic acid, four molecules of ATP, two molecules of NADEL and two molecules of H.O. However, only two molecules of ATP are counted as net products since two molecules of ATP are spent throughout the process. Stage II: Krebs Cycle The Krebs cycle, named after its proponent Sir Hans Adolf Krebs, is a cyclical series of enzyme-controlled reactions. This stage of cellular respiration occurs in the matrix of the mitochondria. It is sometimes. called the citric acid cycle (CAC) since it produces citric acid. Citric acid contains three carboxyl (COOH) groups; hence, it is also called the tricarboxylic acid cycle (TCA). This requires the pyruvic acids produced during glycolysis. The main function of this cycle is to produce high-energy-yielding molecules, namely, NADH and flavin adenine dinucleotide (FADH) that will later on be used in the electron transport chain reaction. Figure 6-7. Summary of glycolysis and corresponding products in each reaction presented (See Appendix F on page 285 for an enlarged and complete version of the image.) An initial process is needed for the Krebs cycle to begin. As a pyruvate molecule from glycolysis enters the mitochondrion, it undergoes an important preliminary ate to form acetyl-CoA reaction. Coenzyme-A (COA) combines with pyruvate help of an enzymatic complex. This conversion also produces CO, and NADH. The Krebs cycle is summarized as follows. Take note that several enzymes are involved in this process. 1. The Krebs cycle technically begins when the acetyl-CoA combines with oxaloacetic acid (OAA), a 4-C molecule, to produce citric acid, a 6-C molecule. 2. With the aid of an enzyme, the citric acid now goes through a series of reactions that releases energy. Water molecule is removed from the citric acid and is returned in a different location. The-OH group is repositioned, forming the molecule isocitrate. 3. Isocitrate is then oxidized, forming the a-ketoglutarate, a 5-C molecule. The byproducts of this reaction are NADH and CO, 4 The a-ketoglutarate loses its CO, and a coenzyme-A is added in its place. The decarboxylation occurs with the help of NAD, which then becomes NADH. The resulting molecule is called succinyl-CoA. 5. Succinyl-CoA is converted into succinate. Also in this reaction, a molecule of guanosine triphosphate (GTP) is synthesized. The GTP molecule has similar structure and energy properties to that of ATP and is used by cells the same way. The free phosphate group attacks the succinyl-CoA molecule, which detaches the COA. Then, phosphate is attached to GDP to come up with GTP, similar to the process that occur in ATP synthesis (from ADP to ATP). 6. Two hydrogens are removed from succinate, A molecule of flavin adenine dinucleotide (FAD), a coenzyme similar to NAD, is reduced to FADH, as it takes the hydrogens from the succinate. This reaction produces the fumarate. 7. Fumarate is then converted into malate as the addition of a water molecule is catalyzed. The final reaction is the regeneration of oxaloacetate. The resulting byproduct of this regeneration is NADH Recall that two pyruvate molecules were produced during glycolysis, causing the Krebs cycle to turn twice. Each tuts produces three molecules of NADH, single ATH one FADIH, and the by-product CO, which is exhaled. Stage III: Electron Transport Chain The electron transport chain (ETC) is a series of photon pumps on the inner membrane of the mitochondrion. Electron transport is the last stage of the cellular respiration. In this stage, the energy from NADH and FADH, from the Krebs cycle is transferred to ADP to produce ATP. This process is generally known as oxidative phosphorylation. This energy coupling mechanism in the cell was revealed by the work of Peter stored energy in the form of proton (1) gradient to phosphorylate (add phosphate) ADP and produce ATP. The pumping of hydrogen sons across the inner membrane creates higher concentration ions in the inner membrane than on the outside of the membrane. This chemiosmotic gradient causes the ions to flow back across the membrane where the concentration of ions is lower. ATP synthase lined in the matrix serve as a channel protein, helping the ions to move across the membrane. The chemiosmotic gradient powers the phosphorylation of ADP to ATP, which also occurs in the ATP synthase. After passing through the ETC, the oxygen, being the final hydrogen acceptor, combines with two electrons and two protons, forming a water molecule. Water is a by-product of cellular respiration and is excreted. MINI TEST 6-3 1. Which energy-releasing pathway yields the most ATF in each glucose molecule? 2. Briefly describe the two stages of aerobic respiration that follow glycolysis: (a) Krebs cycle (b) Electron transport chain Anaerobic Respiration Most cells carry out arrobic respiration when oxygen is present. Aerobic respiration is an efficient process that yields a lot of ATP. However, many organisms thrive in mud, marshes, animal gut, canned goods, sewage treatment pond, and deep oceans where oxygen is scarce. Organisms that can live without oxygen are called anaerobes. Cellular respiration that proceeds without the presence of oxygen is called anaerobic respiration. In the event that the oxygen supply becomes low, aerobic cells also perform fermentation and lactic acid fermentation anaerobic pathways. There are two common anaerobic pathways in these cells, alcoholic fermentation and lactic acid fermentation. In alcoholic fermentation, ethyl alcohol and carbon dioxide are produced by some cells using the pyruvate from glycolysis. Each pyruvate molecule is rearranged into acetaldehyde and carbon dioxide, which is eventually released. NADII gives up electrons to acetaldehyde to form ethanol Fermentation is widely used in the industry. Yeast, a fungus used in making bread. can undergo anaerobic respiration. Bakers aux sugar, flour, water, and yeast to form the bread dough. The dough rises due to the carbon dioxide and alcohol released by the yeast cells trapped in air bubbles. Beer and wine manufacturers, we yeast to ferment the sugars in wheat and grape juice, forming alcoholic beverages such as beer and wine. In some cells, glycolysis produces two pyruvates, two NADH molecules, and two ATP molecules. Pyruvate itself becomes the final acceptor of the electrons from the NADH that produces the final product: lactate. Oftentimes, this product is called lactic acid. Human skeletal muscles can carry out fermentation when the blood cannot supply the cells with adequate oxygen during strenuous activities. When lactic acid builds up in the muscles, fatigue, burning sensation, and cramps result. Lactic acid will continue to build up until there is adequate supply of oxygen. Lactic acid is then converted back into pyruvate in the liver. Muscles also restore normal functions. Have you ever wondered why milk or cream turns sour after some time? Bacterial cells that undergo fermentation are responsible in producing lactate that turns the milk sour. These bacteria are used in manufacturing yogurt and sour milk products. Fermentation pathways do not breakdown and utilize the glucose completely. ATP is no longer produced beyond the process of glycolysis. Thus, energy produced is just enough for some single-celled organisms, or the energy can only be used by multicellular organisms for a short period.

Plant cells have three kinds of structures that are not found in animal cells and that are extremely important to plant survival: plastids, central vacuoles, and cell walls. PLANT CELLS Most of the organelles and other parts of the cell just described are common to all eukaryotic cells. However, plant cells have three additional kinds of structures that are extremely important to plant function: cell walls, large central vacuoles, and plastids. To understand why plant cells have structures not found in ani- mal cells, consider how a plant’s lifestyle differs from an animal’s. Plants make their own carbon-containing molecules directly from carbon taken in from the environment. Plant cells take carbon diox- ide gas from the air, and in a process called photosynthesis, they convert carbon dioxide and water into sugars. The organelles and structures in plant cells are shown in Figure 4-21. SECTION 4 OBJECTIVES ● List three structures that are present in plant cells but not in animal cells. ● Compare the plasma membrane, the primary cell wall, and the secondary cell wall. ● Explain the role of the central vacuole. ● Describe the roles of plastids in the life of a plant. ● Identify features that distinguish prokaryotes, eukaryotes, plant cells, and animal cells. VOCABULARY cell wall central vacuole plastid chloroplast thylakoid chlorophyll Chloroplast Golgi apparatus Mitochondrion Cell membrane Nucleolus Nucleus Cytoskeleton Rough endoplasmic reticulum Pore Smooth endoplasmic reticulum Central vacuole Ribosome Cell wall In addition to containing almost all of the types of organelles that animal cells contain, plant cells contain three unique features. Those features are the cell wall, the central vacuole, and plastids, such as chloroplasts. FIGURE 4-21 Copyright © by Holt, Rinehart and Winston. All rights reserved. 88 CHAPTER 4 CELL WALL The cell wall is a rigid layer that lies outside the cell’s plasma membrane. Plant cell walls contain a carbohydrate called cellulose. Cellulose is embedded in a matrix of proteins and other carbohy- drates that form a stiff box around each cell. Pores in the cell wall allow water, ions, and some molecules to enter and exit the cell. Primary and Secondary Cell Walls The main component of the cell wall, cellulose, is made directly on the surface of the plasma membrane by enzymes that travel along the membrane. These enzymes are guided by microtubules inside the plasma membrane. Growth of the primary cell wall occurs in one direction, based on the orientation of the microtubules. Other components of the cell wall are made in the ER. These materials move in vesicles to the Golgi and then to the cell surface. Some plants also produce a secondary cell wall. When the cell stops growing, it secretes the secondary cell wall between the plasma membrane and the primary cell wall. The secondary cell wall is very strong but can no longer expand. The wood in desks and tabletops is made of billions of secondary cell walls. The cells inside the walls have died and disintegrated. CENTRAL VACUOLE Plant cells may contain a reservoir that stores large amounts of water. The central vacuole is a large, fluid-filled organelle that stores not only water but also enzymes, metabolic wastes, and other materials. The central vacuole, shown in Figure 4-22, forms as other smaller vacuoles fuse together. Central vacuoles can make up 90 percent of the plant cell’s volume and can push all of the other organelles into a thin layer against the plasma membrane. When water is plentiful, it fills a plant’s vacuoles. The cells expand and the plant stands upright. In a dry period, the vacuoles lose water, the cells shrink, and the plant wilts. Other Vacuoles Some vacuoles store toxic materials. The vacuoles of acacia trees, for example, store poisons that provide a defense against plant-eating ani- mals. Tobacco plant cells store the toxin nicotine in a storage vacuole. Other vacuoles store plant pigments, such as the colorful pigments found in rose petals. The central vacuole occupies up to 90 percent of the volume of some plant cells. The central vacuole stores water and helps keep plant tissue firm. FIGURE 4-22 Central vacuole Nucleus Chloroplast Copyright © by Holt, Rinehart and Winston. All rights reserved. CELL STRUCTURE AND FUNCTION 89 PLASTIDS Plastids are another unique feature of plant cells. Plastids are organelles that, like mitochondria, are surrounded by a double mem- brane and contain their own DNA. There are several types of plastids, including chloroplasts, chromoplasts, and leucoplasts. Chloroplasts Chloroplasts use light energy to make carbohydrates from carbon dioxide and water. As Figure 4-23 shows, each chloroplast contains a system of flattened, membranous sacs called thylakoids. Thylakoids contain the green pigment chlorophyll, the main mole- cule that absorbs light and captures light energy for the cell. Chloroplasts can be found not only in plant cells but also in a wide variety of eukaryotic algae, such as seaweed. Chloroplast DNA is very similar to the DNA of certain photosyn- thetic bacteria. Plant cell chloroplasts can arise only by the divi- sion of preexisting chloroplasts. These facts may suggest that chloroplasts are descendants of ancient prokaryotic cells. Like mitochondria, chloroplasts are also thought to be the descendants of ancient prokaryotic cells that were incorporated into plant cells through a process called endosymbiosis. Chromoplasts Chromoplasts are plastids that contain colorful pigments and that may or may not take part in photosynthesis. Carrot root cells, for example, contain chromoplasts filled with the orange pigment carotene. Chromoplasts in flower petal cells contain red, purple, yellow, or white pigments. Other Plastids Several other types of plastids share the general features of chloro- plasts but differ in content. For example, amyloplasts store starch. Chloroplasts, chromoplasts, and amyloplasts arise from a common precursor, called a proplastid. Thylakoid Inner membrane Outer membrane chloroplast from the Greek chloros, meaning “pale green,” and plastos, meaning “formed” Word Roots and Origins A chloroplast captures energy from sunlight and uses that energy to convert carbon dioxide and water into sugar and other carbohydrates. FIGURE 4-23 Copyright © by Holt, Rinehart and Winston. All rights reserved. 90 CHAPTER 4 COMPARING CELLS All cells share common features, such as a cell membrane, cyto- plasm, ribosomes, and genetic material. But there is a high level of diversity among cells, as shown in Figure 4-24. There are signifi- cant differences between prokaryotes and eukaryotes. In addition, plant cells have features that are not found in animal cells. Prokaryotes Versus Eukaryotes Prokaryotes differ from eukaryotes in that prokaryotes lack a nucleus and membrane-bound organelles. Prokaryotes have a region, called a nucleoid, in which their genetic material is concen- trated. However, prokaryotes lack an internal membrane system. Plant Cells Versus Animal Cells Three unique features distinguish plant cells from animal cells. One is the production of a cell wall by plant cells. Plant cells contain a large central vacuole. Third, plant cells contain a variety of plastids, which are not found in animal cells. Cell walls, central vacuoles, and plastids are unique features that are important to plant function. 1. Identify three unique features of plant cells. 2. List the differences between the plasma mem- brane, the primary cell wall, and the secondary cell wall. 3. Identify three functions of plastids. 4. Name three things that may be stored in vacuoles. 5. Describe the features that distinguish prokary- otes from eukaryotes and plant cells from animal cells. CRITICAL THINKING

SB2. Obtain, evaluate, and communicate information to analyze how genetic information is expressed in cells. a. Construct an explanation of how the structures of DNA and RNA lead to the expression of information within the cell via the processes of replication, transcription, and translation. Learning Targets _______Identify the structural components of DNA and RNA Success Criteria _______Can accurately identify the key structural components of DNA (deoxyribose sugar, phosphate group, nitrogenous bases: adenine, thymine, cytosine, guanine). _______Can identify the key structural components of RNA (ribose sugar, phosphate group, nitrogenous bases: adenine, uracil, cytosine, guanine). _______Can describe the differences in the sugar backbone of DNA and RNA (deoxyribose vs. ribose). _______Can identify the double-stranded structure of DNA and the single-stranded structure of RNA. _______Identify the parts of protein synthesis and the location of each process Success Criteria _______Can identify and describe the two main processes of protein synthesis: transcription and translation. _______Can correctly explain that transcription occurs in the nucleus where DNA is transcribed into mRNA. _______Can explain that translation occurs in the cytoplasm at ribosomes where mRNA is translated into amino acid sequences to form proteins. _______Compare and Contrast DNA to RNA Success Criteria _______Can clearly identify similarities between DNA and RNA, such as both being nucleic acids and containing nucleotide structures. _______Can explain differences in DNA and RNA, including sugar types (deoxyribose vs. ribose), strand number (double-stranded DNA vs. single-stranded RNA), and nitrogenous base usage (thymine in DNA vs. uracil in RNA). _______Can describe the function of DNA as genetic storage and the function of RNA in protein synthesis (mRNA, tRNA, rRNA). _______Analyze the reasoning for enzymes usage in both DNA replication and protein synthesis. Success Criteria _______Can identify key enzymes involved in DNA replication (e.g., helicase, DNA polymerase, ligase) and explain their functions (e.g., helicase-unwinding DNA, DNA polymerase-synthesizing new DNA strands, ligase-sealing nicks in the DNA backbone). _______Can identify enzymes involved in protein synthesis (e.g., RNA polymerase) and explain their role in transcribing DNA into mRNA. _______Can analyze why enzymes are essential for speeding up chemical reactions…(ensuring accuracy, and catalyzing steps in replication and protein synthesis) _______Can provide specific examples of how enzyme malfunction can impact genetic replication or protein synthesis. _______Perform the steps of DNA replication and protein synthesis in order to demonstrate their understanding of how the structure of DNA supports the genetic expression in successive generations. Success Criteria _______Can demonstrate a step-by-step understanding of DNA replication, including unwinding, complementary base pairing, and proofreading. _______Can demonstrate the steps of transcription (formation of mRNA from DNA) and translation (conversion of mRNA into a polypeptide). _______Can show how DNA's structure (double helix, base pairing) ensures accurate replication for passing genetic information to offspring. _______Can illustrate how changes in DNA sequence can lead to changes in protein structure and function, thus affecting traits in successive generations.

Abstract The main focus of this research is to discuss the perspective of the teamwork and its impaction organizational performance and success. Also highlight the Meanings of Team and its work sprit towards batter organizational performance and specific to its impact on the success of organization that provided the basis for this research study. In this research study a thoroughly focus was on organization and teamwork. The aim of this research is to deliver a participative view of teamwork in the organization, and also discourses the major issues and emphases on the recent work that opens the basis to move research onward. There is much worth in taking a more focus on the essential areas of teamwork. The team signifies the spirit and working capacity of the employees as team to bring organization to the success. The various explanations, definitions, processes, dimensions, team size and benefits etc. regarding the above topic teamwork and organizational success is highlighted. Keywords: Teamwork, Success, Organization, Performance, Work Groups, Employees Introduction It is indeed human beings have learned in their beginning of life to work together as (Team) that have made such a remarkable developments as unique specie. Human beings have experience throughout their social history, lived, loved, grow younger to older and worked together in groups said West M.A. (2012).The mutual social knowledge of living and functioning together creates connection among people, society and families. When work is done cooperatively as a team it can achieve extremely extra work than individually. Team can be defined as in the human society to live, to work and to play and to cooperate with others for particular task. According to John W. Newstrom et al (1993) “team is the process of assessing performance of workers, passing information and exploring methods to increase performance”. If observe closely, one can discover the instances of The Government: Research Journal of Political Science Supplementary Edition Vol. III 88 The Government social (teams) they are functioning either effectively or ineffectively everywhere; organizations, schools, work place, home etc. “Coordinating the events of people is like sand house, making by using a sole particles of sand” expressed Belbin, R. M.(2010). Moreover it is one of the general myths that the skill of team member is more important than their vigor, attention and determination for the tasks. Another widespread myth is that the team members are not alone accountable for the achievements or failures of their tasks the truth is that the members are the small parts in the teams and their individual abilities effect on the various results in team. The working relationships exist among team that might sight these relationships at different levels of involvement or relationships among the members as they move towards the degree of communication, integration and commitment increases. Terry L.G. et al (1980) expressed that “The skills are essential if members have to work together efficiently in complex situations, only development of skills and relationships, involvement on the task regarding the particular task might be selected for reaching at target that is considered as a definition of a team”. Team often perform higher when they work together with sprit that enable them to achieve a collective goal at the workplace, it is not only benefits to the organization also affects the workers confidence and success. Cooperating on various tasks reduces workloads for all team members and enables them to share duties or ideas. Work as a team is the part of everyone's life, as one is a member of a family team, staff team, school team, and community teams etc., so as to understand how to work effectively as a team member. Especially there is a need when task is threatened with increasingly many problems for example; the energy problem has effects on organization, family life, and social development and the multi-dimensional nature of many problems require a scientific skill based problem solving approach. Terry L.G, et al (1980) expressed that “The skills, competencies and efforts of team by setting priorities the team can have better impact on the problems solving such efforts can reduce work load, work duplication, and produce a result better than separate efforts”. There are some processes of teamwork by adopting those the objectives can be achieved easily. Le Pine, et al, (2008) identified10 teamwork processes that fall in three categories following are those. TEAMWORK PROCESSES TRANSITION PROCESSES •Mission analysis •Goal specification •Strategy formulation ACTION PROCESSES •Monitoring progress toward goals •Systems monitoring •Team monitoring and backup behavior •Coordination INTERPERSONAL PROCESSES •Conflict management •Motivation and confidence building •Affect management Team Work 89 Teamwork process reduces the work stress on every member which permits members to complete given important task of organization; teamwork offers members an opening to pledge with each other. Also it develops relations between the members who start a teamwork they usually sense appreciated on productive accomplishment of task. It may be cited one of the best instances of surgical team; where surgeon is assisted by his team; nurses, anesthetist and experts etc., everyone knows that their success depends upon the teamwork. In addition they are devoted to the aim that is human life it is easy to succeed with best teamwork. The important role of manager is the team building, trust building, confidence building, in the team to achieve the task. In the Situation where all team members contribute the task, it develops the positive relationship in the team that improves the trust of team members.“Functions effectively members of team must be flexible, committed, trusting each other and help to each other’s in the progress and the achievement of goals” Expressed Plamínek (2008). The accountability of every member in the team must be increased so that they do not let each other down therefore they do their best for the achievements of their teams. In contrast, working alone on a task the pressure is generally high in team in those cases of small confidence impacts fewer on members. Team consists on members who always vary from each other’s in skills, knowledge and abilities but working together that is an opportunity for them to gain skills and knowledge from each other’s that they had never before. Working alone on a task is a challenge and using the ideas of each other brings them to come up with a mutual resolution and the achievement of the task. Nowadays theoretical development and research has rested largely a new trend that is emerging within the organizations as an essential process of teamwork. Teamwork has brought a new move in the research and development to the inputs and outputs that bound, constrain and impact on the team processes within organizations said Ilgen, D.R. (1999). The world is changes fast, any one set of instructions can’t be sufficient, changes needs flexible members, teams and organizations so as to be effective on task. This paper suggests that in teams members must use the exclusive human abilities. Cannon B.et al (1995) has précised dimensions of teams into three categories: Team dimensions 1-Cognitions: include associations, task team-mate characteristics, team mission, objectives, norms, and resources, team role interaction patterns, skills, roles, and team orientation. 2-Skills: consist on adaptability, shared situational awareness and mutual concept to conflict resolution. 90 The Government 3-Attitudes: symbolize motivation, collective potency, shared vision, team cohesion, mutual trust, collective orientation and importance of. Teamsize Researchers have given different approvals about the best size of team as Katzenbachetet al (1993) suggested that the teams should comprise on a dozen or so members which are enough to achieve a task. Although seven is the best size of the team in the organizational practices said Scharf, A. (1989). Several views of researchers are expressed in the literatures and it is difficult to decide which better is because their opinions are based on their own observations. The team size matters in the proper output and performance however from an empirical research it is also difficult to decide the suitable team size and what to accept. This study suggests that team size has a practical link with efficacy such as few or many member shave impact on the performance but size matters. Proper size of team improves the performance maximum stated Campion M. A et al (1996).These different results are expected due to the fact that appropriate team size is required for task, environment and situation where team works. However, larger teams can also experience coordination problems that delay performance. Sheppard, J. A. (1993) expressed that the question of best team’s size is a complex one; more research is required on this topic to explain the impact of team size on given definite task. Literature Review Across many different organizations and industries teamwork is focused to increase the performance of employees’ their unity and also create work culture. Organizations those regularly develop new ideas or products using a project-based approach and assemble teams in order to focus responsibilities to achieve the object. Researchers have given dissimilar meanings of “teams”. Dyer W.G. (2007) said that “teams are groups of people who trust in cooperation, if members are expert the success of goal is more possible”. It is essential due to the problemsolving cooperation added from many minds of team members working on a resolution of problems. Team members contribute their thoughts together to make exclusive plans for dealing with problems and this unity enhance the result due to interaction, trust and teamwork. Teamwork means a "work done by several companions with each doing a part but all subordinating personal prominence to the efficiency of the whole" Merriam, (2012). In addition combined employees are expected less hostile to each other and accepting more of each other’s decisions. Unity of employees can increase the flow of work in organization. When employee’s working together as a team, they learn from each other that awareness is based on their personal experiences and from coworkers; Team Work 91 employees from different departments may acquire knowledge from each other. The main object for organizations is to hold the team effort to achieve output and quality; team is a key to achieve quality productivity. According to Maddux et al (2003) “some of the organizations have major benefits from the use of teamwork which are showed in the following chart: Benefits of Teamwork 1 Improving quality of work life for employees 2 Reducing absenteeism and increasing turnover 3 Increasing innovation and change 4 Improving organizational adaptability and flexibility A real team is mostly one where members are allowed to take decisions that how to complete task. That authority enables them to control the work process, decreases the outside control and increases the sense of duty for work. Team always feels superiority on workplace and they rely on each other’s being there. Plamínek (2008) said that “affiliation with teamwork gives member a sense of belonging, interaction and recognition of success”. These actions support to remove the sense of loneliness of team member in organization. Effective teams can also improve efficacy through communication and trust between the team members, quality of work and decrease in absenteeism contribute to positive impact on team. Involving employees in teamwork helps the organization remain open to new ideas.“The world of organizations is shifting individualism is out and collectivism is in, power is out, empowerment is in.” stated G. M. Parker (1998). This study discovers the experiences and difficulties of teamwork that employees and organizations are facing nowadays due to big transformation and enlarged globalization. In recent years a remarkable amendment has been emerged in the belief of team working organizations. The modern study has explored that the scope of teamwork have been appeared in system rooted in belief, and employees accept changes that denoting a modern organizational system. The organizations which are responsive to the changes appear to achieve greater satisfaction. Although it may be suggested that, the managers should assess the values and beliefs of their employees to play more dedicated role in the development of organization by making sprit to face the modern challenges. Organizational cultural is much significant and it has the excessive impact on the performance of organization and employees’ but it is quiet arguable topic that the culture of teamwork can be developed according to the requirement. It is difficult to specify the relationships and to assess the reliable set of values to use as they believed symbol across the entire organizations. This review study focus that 92 The Government there is a great influence of organizational culture on the assumptions, values, and beliefs on the individuals’ considerations, actions and performances and so is vice versa, through learning, and training process. However the researchers believe that the organizational setup aids to unite employees of diverse cultures and dissimilar social backgrounds, traditions and have their own beliefs to work. Creating a positive teamwork culture it has several diverse aspects are goal setting, conflict resolution, empowerment, ability to accomplish tasks, measuring output and consideration for other teamwork cultures stated Pack L, et al April 27, (2012). Team work in the organization delivers employees the wisdom of unity; understand to each other’s, and reducing conflict. In addition teamwork in organization inspires employee for impartiality by affirming that no one is ignored in the organization and all treated equally. It is known that a team in organization is bound and sincere to work with dedication to bring the success. If the employees are committed and recognize the teamwork values and its benefits, as a part of the organization they can contribute a lot to the achievement of organization. One can finds the informal instances of team at these level, family, society, community, tribe and work groups etc., and formally team appears at the level of departments, functional groups, and other organizational units. The employees feel a greater sense of achievement for being a part of an organization, if they attain team work, having freedom to work not forced. The system gives best performance to achieve recognition and credit from their managers and it will increase their effort that helps them to contribute the organizational performance. Each team batter knows about their role and how to achieve tasks. The true spirit of teamwork gives benefit to organization in maintaining its standard by which it becomes identified. The team defines its specialty, and the way it is doing task that is perceived by the organization as well as its managers and it is secured by appreciation. Employees identify what they believe; that exist in their belief system and those understandings call them to change their views to develop and raise attention towards batter performance. The literature contains sufficient definitions of teamwork and the word team is used to denote a set of generally developed as to learn collective values, attitudes and cooperation to work. The study praises that the teamwork is mostly related with the team success for instance, Wagner (1995) described that “in the team individual is less valued and group is more valued, with”. It is found in the study that individualismcollectivism both regulates the relationships between team size, standing, and cooperation that have better effects on the cooperation of individualists rather than the cooperation of collectivists. Team Work 93 Conclusion The main concentration of this research paper is to examine more in-depth the fundamental of teamwork and its effectiveness to achieve the organizational goals. Teamwork provides vast amounts of knowledge and information, cultural differences each of these building a culture of teamwork and the skill to make the valuable solutions of the problems. To work efficiently, team members need a good understanding of how to do their job, to achieve goal and for that a basic way to ensure understanding is training, then they have to be motivated to do a job. Team is a vital activity of organization, when organization desires to perform sound it has to be confident that team functions effectively. Consequently it is compulsory to know how team performs, what manners within a team happen, and how they make decisions. If there is knowhow of teamwork events, it can be effective for the tasks that they have to accomplish. Organizations build up their own culture through tradition, history and structure these values can be accepted by team workers of an organization. The values and assumptions are the vital tools of organizations and are used as guidance for team. These have to do mostly with the basic dignity and worth of all members of team and the ability, necessity for them to solve the problems and work for the positive change. Through this review study is concluded that there is a good impact of teamwork on the organizations doings and success. Subsequently in recently developed literature there is a great focus amongst the social scientists and scholars’ in their discussion on the above topic teamwork. The above study is also an evidence of little effort to assess the significance of teamwork in organizations success. teams in organiz

The cytoskeleton is a network of thin tubes and filaments that crisscrosses the cytosol. The tubes and filaments give shape to the cell from the inside in the same way that tent poles support the shape of a tent. The cytoskeleton also acts as a system of internal tracks, shown in Figure 4-18, on which items move around inside the cell. The cytoskeleton’s functions are based on several struc- tural elements. Three of these are microtubules, microfilaments, and intermediate filaments, shown and described in Table 4-2. Microtubules Microtubules are hollow tubes made of a protein called tubulin. Each tubulin molecule consists of two slightly different subunits. Microtubules radiate outward from a central point called the centrosome near the nucleus. Microtubules hold organelles in place, maintain a cell’s shape, and act as tracks that guide organelles and molecules as they move within the cell. Microfilaments Finer than microtubules, microfilaments are long threads of the beadlike protein actin and are linked end to end and wrapped around each other like two strands of a rope. Microfilaments con- tribute to cell movement, including the crawling of white blood cells and the contraction of muscle cells. Intermediate Filaments Intermediate filaments are rods that anchor the nucleus and some other organelles to their places in the cell. They maintain the inter- nal shape of the nucleus. Hair-follicle cells produce large quantities of intermediate filament proteins. These proteins make up most of the hair shaft. 84 CHAPTER 4 TABLE 4-2 The Structure of the Cytoskeleton Property Microtubules Microfilaments Intermediate filaments Structure hollow tubes made of two strands of intertwined protein fibers coiled into coiled protein protein cables Protein subunits tubulin, with two subunits: å actin one of several types of and ∫ tubulin fibrous proteins Main function maintenance of cell shape; cell maintenance and changing of maintenance of cell shape; motility (in cilia and flagella); cell shape; muscle contraction; anchor nucleus and other chromosome movement; movement of cytoplasm; cell organelles; maintenance of organelle movement motility; cell division shape of nucleus Shape Microtubules provide a path for organelles and molecules as they move throughout the cell. FIGURE 4-18 Microtubules Nucleus Endoplasmic reticulum Mitochondrion Ribosomes Copyright © by Holt, Rinehart and Winston. All rights reserved. Copyright © by Holt, Rinehart and Winston. All rights reserved. CELL STRUCTURE AND FUNCTION 85 1. Explain how the fluid mosaic model describes the plasma membrane. 2. List three cellular functions that occur in the nucleus. 3. Describe the organelles that are found in a eukaryotic cell. 4. Identify two characteristics that make mitochon- dria different from other organelles. 5. Contrast three types of cytoskeletal fibers. CRITICAL THINKING 6. Relating Concepts If a cell has a high energy requirement, would you expect the cell to have many mitochondria or few mitochondria? Why? 7. Analyzing Information How do scientists think that mitochondria originated? Why? 8. Analyzing Statements It is not completely accurate to say that organelles are floating freely in the cytosol. Why not? SECTION 3 REVIEW During cell division, centrioles organize microtubules that pull the chromosomes (orange) apart. The centrioles are at the center of rays of microtubules, which have been stained green with a fluorescent dye. FIGURE 4-20 Cilia and Flagella Cilia (SIL-ee-uh) and flagella (fluh-JEL-uh) are hairlike structures that extend from the surface of the cell, where they assist in movement. Cilia are short and are present in large numbers on certain cells, whereas flagella are longer and are far less numerous on the cells where they occur. Cilia and flagella have a membrane on their outer surface and an internal structure of nine pairs of micro- tubules around two central tubules, as Figure 4-19 shows. Cilia on cells in the inner ear vibrate and help detect sound. Cilia cover the surfaces of many protists and “row” the protists through water like thousands of oars. On other protists, cilia sweep water and food particles into a mouthlike opening. Many kinds of protists use flagella to propel themselves, as do human sperm cells. Centrioles Centrioles consist of two short cylinders of microtubules at right angles to each other and are situated in the cytoplasm near the nuclear envelope. Centrioles occur in animal cells, where they organize the microtubules of the cytoskeleton during cell division, as shown in Figure 4-20. Plant cells lack centrioles. Basal bodies have the same structure that centrioles do. Basal bodies are found at the base of cilia and flagella and appear to organize the devel- opment of cilia and flagella.

Related quizzes

Related quizzes