Identify the definition of Vertex in terms of angles.

Where two rays meet at a common endpoint.

Adjacent angles that form a right angle (90°).

A tool for measuring the size of an angle.

Angles that form a straight angle (180°).

Identify the definition of a Protractor.

A tool for measuring the size of an angle.

Adjacent angles that form a right angle (90°).

Angles that form a straight angle (180°).

Where two rays meet at a common endpoint.

Identify the definition of Supplementary angles.

Angles that form a straight angle (180°).

Adjacent angles that form a right angle (90°).

Angles that are stuck together side by side.

Where two rays meet at a common endpoint.

Identify the definition of Adjacent angles.

Angles that are stuck together side by side.

Where two rays meet at a common endpoint.

A tool for measuring the size of an angle.

Angles that form a straight angle.

What is the measure of ∠ADC?

This question is not answerable without context.

Which is the BEST choice for the measure of angle BDA?

This question is not answerable without context.

Which is the BEST choice for the measure of this angle?

This question is not answerable without context.

Measuring and Finding Missing Angles Study Guide

Measuring the Effectiveness of police strategies and operations Clearance rates Def: The proportion of incidents known to the police that result in teh identification of a suspect Crime Displacement Def: relocation-due to the effective crime prevention, crime response initiates criminal activity from one local to another Professional Model of Policing Model of police work, reactive, incident driven and centred on random patrol Three Rs: random patrol, rapid response and reactive investigation Community policing Def: policing centred on police-community partnership and problem-solving The three ps: prevention, problem solving and partnership with the proactive role Community-based strategic policing Def: The model incorporates community policing with prevention, crime response and crime attack approaches Community engagement, police services strategic in their policies and operations Crime Analytics Sophisticated programs, and crime maps, provide intelligence to police officers in patrol and investigative units Intelligence-led policing: guided by collection, and analysis of information informs police decision-making Compstat: Increase effectiveness, and efficiency of police service while holding police personnel accountable for crime reduction Predictive policing: statistical analysis, identify time and location likely to occur Limited analytical capacity and not able to provide their officers with real-time information Biased policing certain areas, or persons, being identified as important for police attention in predictive policing How Predictive Policing Software Works The Police and the community Public Attitudes toward and Confidence in the police Community-based strategic policing: Recruitment, and deployment of volunteers in community police stations, storefronts Foot and bike patrols Team policing Restorative Justice Approaches Alternative for addressing, and resolving crime, needs of victims, offenders and the community Victim offender meditation Circle sentencing Community holistic healing programss Family group conferences Crime Prevention and Response Strategies Crime Prevention progemas Aimed at reducing crime, generating community involvement and heightening citizens; perceptions of safety Primary crime prevention programs opportunities for criminal offences and alter those conditions Secondary crime prevention programs focus on areas that produce crime and disorder Tertiary crime prevention programs are designed to prevent youth and adults from reoffending The Broken Windows Approach If minor crimes are left unaddressed in an environment, more serious crimes will emerge (originated in New York City in the 1980’s) “The exictsnce of unchecked and uncontrolled mirror incivilites in a neighbourhood- for example, panhandling, public drunkenness, vandalism and graffiti-produces an atmosphere conducive to more serious crime.” R.H. Burke Zero tolerance policing Zero tolerance policing: Strict order maintenance approach- specific area, coupled with high police visibility and presence Quality of life policing: Increased police visibility improves conditions in an area by targeting disruptive and annoying behaviour Problem Oritented policing (POP) Strategy, the idea that police should address teh cause of recurrent crime and disorder Root causes of recurring problems Solutions to problems Collabortaion with community SARA (scanning, analysis, response and assessment) problem-solving model helps officers identify, and respond to problems with the assistance of agencies, organizations, community groups The Police and Vulnerable/ At risk groups Persons with Mental Illness Patrol officers encountering more and more persons with mental illness (PwMi) Number of these end trragically Number of incidents increased significantly following deinstitutionalization of the mentally ill - in 1960 and 1970 De facto (in fact) mental health workers, first responders Crisis intervention training (CIT) Assertive outreach teams Assertive community treatment (ACT) teams Indigenouse, Vulnerable, and Marginalized women Sexual assault one of most underreported crimed. 1 in 20 incidents report to police. Many Women Do not want to deal with police Believe police would not take allegation seriously Language, cultural barriers Distrust the police Fear repercussions Missing and Murdered Indigenous women Canada, unknown number of missing and murdered indigenous women 2016, federal government announced National inquiry into Missing and Murdered Indigennouse women and girls Three goals of MMIWG 1. Finding the truth 2. Honouring the truth 3. Giving life to the truth as a path of healing

Make a quiz about the following mini-lab: Mini-Lab: Measuring Reaction Time and Hang Time Objective: In this mini-lab, you will work in groups to measure distances and use calculations to determine your reaction time and hang time. These experiments will help you understand fundamental concepts in physics and reaction time. Materials: Ruler (with metric units) Sticky notes or masking tape A vertical surface (like a wall) Clear space for jumping Calculator (if necessary) Part 1: Measuring Reaction Time Introduction: Reaction time is the time it takes for a person to respond to a stimulus. In this experiment, you will measure distances and use them to calculate your reaction time. Procedure: Preparation: Attach a sticky note or masking tape to the bottom edge of the ruler. Stand facing your partner. Hold the ruler vertically with the zero end at the bottom, lined up with your index finger and thumb. Measurement: Your partner will release the ruler without warning. When you see the ruler fall, try to catch it as quickly as you can. After catching the ruler, measure and record the distance the ruler fell. Data Collection: Each group should repeat the ruler drop experiment three times. Calculate the average distance and record it. Part 2: Calculating Hang Time Introduction: Hang time is the total time a person spends in the air while jumping. In this part of the mini-lab, you will measure distances using tape to mark your jump height and use them to calculate your hang time. Procedure: Preparation: Stand in front of a wall. Reach up as high as you can with your feet flat on the floor. Use a piece of tape to mark this point on the wall. Your partner should stand ready to observe and assist. Measurement: With a loop of tape on your finger, jump as high as you can. Stick the tape on the wall where your fingertips reach when jumping. The difference between the two pieces of tape marks your jumping height. Data Collection: Each group should repeat the jump and measurement three times. Calculations (Make sure to check your units before doing any calculations): Calculating Reaction Time: Use the average distance from Part 1. Calculate the time it took for the ruler to fall using the formula: y = viy t + ½ g t², where viy in this case is zero and "g" is the acceleration due to gravity (approximately 9.81 m/s²). This time is your reaction time. Calculating Hang Time: Use the average jump height difference from Part 2. Calculate the time you spent in the air using the formula: y = viy t + ½ g t². Remember that the velocity at the peak is zero and the total time in the air is twice the time it takes to get to the peak. Conclusion: Discuss your results with your partner and other groups. Compare your reaction times and hang times. Think about factors that may have influenced your results and how you can improve your reaction time and jump height. Consider the real-world applications of understanding reaction time and hang time in physics and sports. Assessment: Work with your partner to write a short report summarizing your findings, including calculations of your reaction time and hang time. Reflect on the factors that may have affected your results and propose improvements to your techniques. Be prepared to discuss your findings in class.

“There’s No Such Thing as Sound Science” by By Christie Aschwanden was a lead science writer for FiveThirtyEight. FiveThirtyEight, Science, Dec. 6, 2017 Science is being turned against itself. For decades, its twin ideals of transparency and rigor have been weaponized by those who disagree with results produced by the scientific method. Under the Trump administration, that fight has ramped up again. In a move ostensibly meant to reduce conflicts of interest, Environmental Protection Agency Administrator Scott Pruitt has removed a number of scientists from advisory panels and replaced some of them with representatives from industries that the agency regulates. Like many in the Trump administration, Pruitt has also cast doubt on the reliability of climate science. For instance, in an interview with CNBC, Pruitt said that “measuring with precision human activity on the climate is something very challenging to do.” Similarly, Trump’s pick to head NASA, an agency that oversees a large portion the nation’s climate research, has insisted that research into human influence on climate lacks certainty, and he falsely claimed that “global temperatures stopped rising 10 years ago.” Kathleen Hartnett White, Trump’s nominee to head the White House Council on Environmental Quality, said in a Senate hearing last month that she thinks we “need to have more precise explanations of the human role and the natural role” in climate change. The same entreaties crop up again and again: We need to root out conflicts. We need more precise evidence. What makes these arguments so powerful is that they sound quite similar to the points raised by proponents of a very different call for change that’s coming from within science. This other movement strives to produce more robust, reproducible findings. Despite having dissimilar goals, the two forces espouse principles that look surprisingly alike: Science needs to be transparent. Results and methods should be openly shared so that outside researchers can independently reproduce and validate them. The methods used to collect and analyze data should be rigorous and clear, and conclusions must be supported by evidence. These are the arguments underlying an “open science” reform movement that was created, in part, as a response to a “reproducibility crisis” that has struck some fields of science.1 But they’re also used as talking points by politicians who are working to make it more difficult for the EPA and other federal agencies to use science in their regulatory decision-making, under the guise of basing policy on “sound science.” Science’s virtues are being wielded against it. What distinguishes the two calls for transparency is intent: Whereas the “open science” movement aims to make science more reliable, reproducible and robust, proponents of “sound science” have historically worked to amplify uncertainty, create doubt and undermine scientific discoveries that threaten their interests. “Our criticisms are founded in a confidence in science,” said Steven Goodman, co-director of the Meta-Research Innovation Center at Stanford and a proponent of open science. “That’s a fundamental difference — we’re critiquing science to make it better. Others are critiquing it to devalue the approach itself.” Calls to base public policy on “sound science” seem unassailable if you don’t know the term’s history. The phrase was adopted by the tobacco industry in the 1990s to counteract mounting evidence linking secondhand smoke to cancer. A 1992 Environmental Protection Agency report identified secondhand smoke as a human carcinogen, and Philip Morris responded by launching an initiative to promote what it called “sound science.” In an internal memo, Philip Morris vice president of corporate affairs Ellen Merlo wrote that the program was designed to “discredit the EPA report,” “prevent states and cities, as well as businesses from passing smoking bans” and “proactively” pass legislation to help their cause. The sound science tactic exploits a fundamental feature of the scientific process: Science does not produce absolute certainty. Contrary to how it’s sometimes represented to the public, science is not a magic wand that turns everything it touches to truth. Instead, it’s a process of uncertainty reduction, much like a game of 20 Questions. Any given study can rarely answer more than one question at a time, and each study usually raises a bunch of new questions in the process of answering old ones. “Science is a process rather than an answer,” said psychologist Alison Ledgerwood of the University of California, Davis. Every answer is provisional and subject to change in the face of new evidence. It’s not entirely correct to say that “this study proves this fact,” Ledgerwood said. “We should be talking instead about how science increases or decreases our confidence in something.” The tobacco industry’s brilliant tactic was to turn this baked-in uncertainty against the scientific enterprise itself. While insisting that they merely wanted to ensure that public policy was based on sound science, tobacco companies defined the term in a way that ensured that no science could ever be sound enough. The only sound science was certain science, which is an impossible standard to achieve. “Doubt is our product,” wrote one employee of the Brown & Williamson tobacco company in a 1969 internal memo. The note went on to say that doubt “is the best means of competing with the ‘body of fact’” and “establishing a controversy.” These strategies for undermining inconvenient science were so effective that they’ve served as a sort of playbook for industry interests ever since, said Stanford University science historian Robert Proctor. The sound science push is no longer just Philip Morris sowing doubt about the links between cigarettes and cancer. It’s also a 1998 action plan by the American Petroleum Institute, Chevron and Exxon Mobil to “install uncertainty” about the link between greenhouse gas emissions and climate change. It’s industry-funded groups’ late-1990s effort to question the science the EPA was using to set fine-particle-pollution air-quality standards that the industry didn’t want. And then there was the more recent effort by Dow Chemical to insist on more scientific certainty before banning a pesticide that the EPA’s scientists had deemed risky to children. Now comes a move by the Trump administration’s EPA to repeal a 2015 rule on wetlands protection by disregarding particular studies. (To name just a few examples.) Doubt merchants aren’t pushing for knowledge, they’re practicing what Proctor has dubbed “agnogenesis” — the intentional manufacture of ignorance. This ignorance isn’t simply the absence of knowing something; it’s a lack of comprehension deliberately created by agents who don’t want you to know, Proctor said.2 In the hands of doubt-makers, transparency becomes a rhetorical move. “It’s really difficult as a scientist or policy maker to make a stand against transparency and openness, because well, who would be against it?” said Karen Levy, researcher on information science at Cornell University. But at the same time, “you can couch everything in the language of transparency and it becomes a powerful weapon.” For instance, when the EPA was preparing to set new limits on particulate pollution in the 1990s, industry groups pushed back against the research and demanded access to primary data (including records that researchers had promised participants would remain confidential) and a reanalysis of the evidence. Their calls succeeded and a new analysis was performed. The reanalysis essentially confirmed the original conclusions, but the process of conducting it delayed the implementation of regulations and cost researchers time and money. Delay is a time-tested strategy. “Gridlock is the greatest friend a global warming skeptic has,” said Marc Morano, a prominent critic of global warming research and the executive director of ClimateDepot.com, in the documentary “Merchants of Doubt” (based on the book by the same name). Morano’s site is a project of the Committee for a Constructive Tomorrow, which has received funding from the oil and gas industry. “We’re the negative force. We’re just trying to stop stuff.” Some of these ploys are getting a fresh boost from Congress. The Data Quality Act (also known as the Information Quality Act) was reportedly written by an industry lobbyist and quietly passed as part of an appropriations bill in 2000. The rule mandates that federal agencies ensure the “quality, objectivity, utility, and integrity of information” that they disseminate, though it does little to define what these terms mean. The law also provides a mechanism for citizens and groups to challenge information that they deem inaccurate, including science that they disagree with. “It was passed in this very quiet way with no explicit debate about it — that should tell you a lot about the real goals,” Levy said. But what’s most telling about the Data Quality Act is how it’s been used, Levy said. A 2004 Washington Post analysis found that in the 20 months following its implementation, the act was repeatedly used by industry groups to push back against proposed regulations and bog down the decision-making process. Instead of deploying transparency as a fundamental principle that applies to all science, these interests have used transparency as a weapon to attack very particular findings that they would like to eradicate. Now Congress is considering another way to legislate how science is used. The Honest Act, a bill sponsored by Rep. Lamar Smith of Texas,3 is another example of what Levy calls a “Trojan horse” law that uses the language of transparency as a cover to achieve other political goals. Smith’s legislation would severely limit the kind of evidence the EPA could use for decision-making. Only studies whose raw data and computer codes were publicly available would be allowed for consideration. That might sound perfectly reasonable, and in many cases it is, Goodman said. But sometimes there are good reasons why researchers can’t conform to these rules, like when the data contains confidential or sensitive medical information.4 Critics, which include more than a dozen scientific organizations, argue that, in practice, the rules would prevent many studies from being considered in EPA reviews.5 It might seem like an easy task to sort good science from bad, but in reality it’s not so simple. “There’s a misplaced idea that we can definitively distinguish the good from the not-good science, but it’s all a matter of degree,” said Brian Nosek, executive director of the Center for Open Science. “There is no perfect study.” Requiring regulators to wait until they have (nonexistent) perfect evidence is essentially “a way of saying, ‘We don’t want to use evidence for our decision-making,’” Nosek said. Most scientific controversies aren’t about science at all, and once the sides are drawn, more data is unlikely to bring opponents into agreement. Michael Carolan, who researches the sociology of technology and scientific knowledge at Colorado State University, wrote in a 2008 paper about why objective knowledge is not enough to resolve environmental controversies. “While these controversies may appear on the surface to rest on disputed questions of fact, beneath often reside differing positions of value; values that can give shape to differing understandings of what ‘the facts’ are.” What’s needed in these cases isn’t more or better science, but mechanisms to bring those hidden values to the forefront of the discussion so that they can be debated transparently. “As long as we continue down this unabashedly naive road about what science is, and what it is capable of doing, we will continue to fail to reach any sort of meaningful consensus on these matters,” Carolan writes. The dispute over tobacco was never about the science of cigarettes’ link to cancer. It was about whether companies have the right to sell dangerous products and, if so, what obligations they have to the consumers who purchased them. Similarly, the debate over climate change isn’t about whether our planet is heating, but about how much responsibility each country and person bears for stopping it. While researching her book “Merchants of Doubt,” science historian Naomi Oreskes found that some of the same people who were defending the tobacco industry as scientific experts were also receiving industry money to deny the role of human activity in global warming. What these issues had in common, she realized, was that they all involved the need for government action. “None of this is about the science. All of this is a political debate about the role of government,” she said in the documentary. These controversies are really about values, not scientific facts, and acknowledging that would allow us to have more truthful and productive debates. What would that look like in practice? Instead of cherry-picking evidence to support a particular view (and insisting that the science points to a desired action), the various sides could lay out the values they are using to assess the evidence. For instance, in Europe, many decisions are guided by the precautionary principle — a system that values caution in the face of uncertainty and says that when the risks are unclear, it should be up to industries to show that their products and processes are not harmful, rather than requiring the government to prove that they are harmful before they can be regulated. By contrast, U.S. agencies tend to wait for strong evidence of harm before issuing regulations. Both approaches have critics, but the difference between them comes down to priorities: Is it better to exercise caution at the risk of burdening companies and perhaps the economy, or is it more important to avoid potential economic downsides even if it means that sometimes a harmful product or industrial process goes unregulated? In other words, under what circumstances do we agree to act on a risk? How certain do we need to be that the risk is real, and how many people would need to be at risk, and how costly is it to reduce that risk? Those are moral questions, not scientific ones, and openly discussing and identifying these kinds of judgment calls would lead to a more honest debate. Science matters, and we need to do it as rigorously as possible. But science can’t tell us how risky is too risky to allow products like cigarettes or potentially harmful pesticides to be sold — those are value judgements that only humans can make.

WHAT IS SCIENCE? - is a way in which answers related to NATURAL events are proposed. - a way in which people can learn and UNDERSTAND events in the NATURAL WORLD - based on OBSERVABLE EVENTS - a study of the NATURAL WORLD - a method of DISCOVERY and UNDERSTANDING by using a PROBLEM-SOLVING process called the?? - A systematic body of knowledge based on observation and experimentation. FOUR COMMON CHARACTERISTICS OF SCIENCE: 1. It focuses on the NATURAL WORLD. 2. Goes through experiment. 3. Relies on evidence. 4. Passes through the scientific community. WHAT IS TECHNOLOGY? Brian Arthur (2009) defined technology as: 1. a means to fulfill a human purpose 2. assemblage of practices and components 3. a collection of devices and engineering practices available to a culture. SOCIETY ST (Science Technology) would not exist without society. WHAT IS STS? Science and Technology and Society (STS) is the study of how society, politics and culture affect scientific research and technological innovation and how these, in turn affects society, politics and culture. EVENTS IN THE HISTORY OF SCIENCE AND TECHNOLOGY THAT TRANSFORMED THE SOCIETY (IN THE WORLD) ANCIENT PERIOD 3500 BC. - 500 AD EUROPE - use of fire by Homo Erectus CA 750,000 - Stone Headed Spears CA 45,000 - Wooden bow and arrow CA 20,000 - The Minoans build palaces in Crete CA 2,000 THE AMERICAS - The Folsom people living on eastern side of the Rocky Mountain developed sophisticated tools CA 8,000. - Pottery is made in South America CA 6,000 - Olmec sculpture carves figurines and giant human heads. CA 1200 ASIA AND OCEANA - Earliest known clay pots are made in Japan CA 11,000. - Bronze is first made in Thailand CA 4000 - A lunar calendar is developed in China CA 2950 - Chinese doctors begin using acupuncture CA 2500 - The Hindu calendar of 360 days was introduced in India CA 1000 AFRICA AND MIDDLE EAST - Homo erectus uses stone tools CA 1000000 - CA 15000 in Africa, bone harpoons are used for fishing. - Clay tokens are used for record keeping in Mesopotamia CA 7500 - Mesopotamian mathematicians discover the Pythagorean Theorem MEDIEVAL PERIOD CA 500 -1500 - Dark ages because few written records and evidences remained - Scholastic tradition was established by Charlemagne - Vertical windmills, spectacles, mechanical clock, water mills, gothic style were invented - Johannes Gutenberg invented the printing press RENAISSANCE PERIOD 14TH – 17TH CENTURY - Rebirth of revival - Printing with movable type allowed Bible, secular books made in large amount - Nicolas Copernicus presented a heliocentric theory - Galileo Galilei invented telescope INDUSTRIAL REVOLUTION 18TH CENTURY - Skilled workers were set aside because of the machines - Iron production, steam engine and textile flourished - Scottish James Watt improved steam engine Robert Fulton (steam boat) - The following were invented: Light bulb, telephone, first steam powered locomotive 19TH CENTURY - Age of machine and tools - Herman Helmholtz (law of conservation of energy) - James Clark Maxwell (light as electro-magnetic wave) - Henry Becquerel (radioactivity) - Marie and Pierre Curie (radium) - Hans Christian Oersted (electric current near the magnet) - Michael Faraday (magnet produces electricity) - Atomic Theory proposed by John Dalton - Electron discovered by JJ. Thomson - Telegraph developed by Samuel Morse 20TH CENTURY - Communication, transportation, military research were developed - Personal computer was created - Intel developed microprocessor - Apple was introduced by Steve Jobs and Steve Wozniak - Internet was created (ARPANET) - Henry Ford's mass production of cars - Artificial Intelligence was invented SCIENCE, TECHNOLOGY AND SOCIETY (PHILIPPINE HISTORY) Stone Age - Archeological findings show that modern man from Asian mainland first came over land on across narrow channels to live in Batangas and Palawan about 48,000 B.C. - Subsequently they formed settlement in Sulu, Davao, Zamboanga, Samar, Negros, Batangas, Laguna, Rizal, Bulacan and Cagayan. Inventions - They made simple tools and weapons of stone flakes and later developed method of sawing and polishing stones around 40,000 B.C. - By around 3,000 B.C. they were producing adzes ornaments of seashells and pottery. Pottery flourished for the next 2,000 years until they imported Chinese porcelain. Soon they learned to produce copper, bronze, iron, and gold metal tools and ornaments. Iron Age - The Iron Age lasted from the third century B.C. to 11th century A.D. During this period Filipinos were engaged in extraction smelting and refining of iron from ores, until the importation of cast iron from Sarawak and later from China. INVENTIONS AND DISCOVERIES - They learn to weave cotton, make glass ornaments, and cultivate lowland rice and dike fields of terraced fields utilizing spring water in mountain regions. - They also learned to build boats for trading purposes. - Spanish chronicles noted refined plank built warships called caracoa suited for interisland trade raids 10TH CENTURY A.D. - Filipinos from the Butuan were trading with Champa (Vietnam) and those from Ma-I (Mindoro) with China as noted in Chinese records containing several references to the Philippines. These archaeological findings indicated that regular trade relations between the Philippines, China and Vietnam had been well established from the 10th century to the 15th century A.D. TRADING - The People of Ma-I and San-Hsu (Palawan) traded bee wax, cotton, pearls, coconut heart mats, tortoise shell and medicinal betel nuts, panie cloth for porcelain, leads fishnets sinker, colored glass beads, iron pots, iron needles and tin. SOME PRESPANISH FILIPINO SCIENCE AND TECHNOLOGY - Curative values of plants extract use as medicine - Alphabet (Alibata) - Counting Methods - Weights - Measuring system (isang gatang) - Calendar based on the periods of moon - Banaue Rice Terraces SPANISH REGIME  Religion the Catholic Church - The latter part of the 16th Century Development of schools: - Colegio de San Ildefonso-Cebu-1595 - Colegio de San Ignacio-Manila-1595 - Colegio De Nuestra Senora del Rosario-Manila 1597 - Colegio De San Jose-Manila-1601  Colegio De San Ildefonso De Cebu - In 1863 the colonial authorities issued a royal degree to reform the existing educational system. In 1871 the school of medicine and pharmacy were opened to UST, after 15 years it had granted the degree Of Licenciado En Medicina to 62 graduates.  Medicine - Development of hospitals San Juan Lazaro hospital the oldest in the far east was founded in 1578.  Roads and Bridges Among other Spanish contributions: - Arithmetic - Algebra - Geometry - Trigonometry - Physics - Hydrography - Meteorology - Navigation - Pilotage American Period and Post Commonwealth Era - BUREAU OF GOVERNMENT LABORATORIES (1901) - BUREAU OF SCIENCE (1905) - INSTITUTE OF SCIENCE (1946) RA 2067 OTHERWISE KNOWN AS THE “SCIENCE ACT OF 1958”. - This was enacted to integrate, coordinate, and intensify scientific and technological research and development and to foster invention including allocation of funds and other purposes. NATIONAL RESEARCH COUNCIL WAS ESTABLISHED ON DECEMBER 8, 1933. - Its Mandate (Nrcp) Promotes And Supports Fundamental Or Basic Research For The Continuing Total Improvement Of The Research Capability Of Individual Scientists Or Group Of Scientists; Provides Advice On Problems And Issues Of National Interest; Promotes Scientific And Technological Culture To All Sectors Of Society; And Fosters Linkages With Local And International Scientific Organizations For Enhanced Cooperation In The Development And Sharing Of Information NATIONAL RESEARCH COUNCIL WAS ESTABLISHED IN DECEMBER 8, 1933. - Its Mandate (NRCP) promotes and supports fundamental or basic research for the continuing total improvement of the research capability of individual scientists or group of scientists; provides advice on problems and issues of national interest; promotes scientific and technological culture to all sectors of society; and fosters linkages with local and international scientific organizations for enhanced cooperation in the development and sharing of information. It was during the American Period when Science was inclined towards: - Agriculture - Food Processing - Forestry - Medicine - Pharmacy - Nursing

Slide 1 Growing Up in the 21st Century: Challenges and Opportunities Slide 2 Introduction: What Does It Mean to Grow Up? • Growing up: The process of maturing physically, mentally, and emotionally • Transition from childhood to adulthood • Unique challenges and opportunities in the 21st century • Importance of mental growth alongside physical development Slide 3 The Journey of Self-Discovery • Exploring personal identity • Understanding values and beliefs • Developing a sense of purpose • Embracing individuality while finding community Slide 4 Mental Growth: A Key Aspect of Maturity • Emotional intelligence and self-awareness • Critical thinking and problem-solving skills • Adaptability and resilience • Importance of continuous learning and personal development Slide 5 Challenges of Growing Up in the Digital Age • Information overload and digital literacy • Social media pressure and online identity • Cyberbullying and online safety • Balancing screen time with real-life experiences Slide 6 21st Century Skills for Success • Technological proficiency • Communication and collaboration • Creativity and innovation • Global awareness and cultural competence Slide 7 Navigating Relationships in a Connected World • Building and maintaining friendships • Romantic relationships in the digital era • Family dynamics and independence • Professional networking and mentorship Slide 8 Education and Career Pathways • Evolving job market and emerging industries • Importance of lifelong learning • Balancing academic success with practical skills • Exploring unconventional career paths Slide 9 Financial Literacy and Independence • Understanding personal finance • Budgeting and saving strategies • Student loans and debt management • Investing for the future Slide 10 Mental Health and Well-being • Recognizing and managing stress • Importance of self-care and work-life balance • Seeking help and support when needed • Destigmatizing mental health issues Slide 11 Physical Health in a Changing World • Importance of regular exercise • Nutrition and healthy eating habits • Sleep hygiene and its impact on well-being • Avoiding harmful substances and addictive behaviors Slide 12 Environmental Awareness and Sustainability • Understanding climate change and its impacts • Developing eco-friendly habits • Participating in community environmental initiatives • Sustainable career opportunities Slide 13 Civic Engagement and Social Responsibility • Understanding political systems and processes • Importance of voting and civic participation • Volunteering and community service • Advocating for social justice and equality Slide 14 Cultural Competence in a Global Society • Appreciating diversity and inclusion • Developing intercultural communication skills • Opportunities for travel and cultural exchange • Embracing multilingualism Slide 15 Time Management and Productivity • Setting goals and priorities • Effective study and work habits • Balancing academics, extracurriculars, and personal life • Avoiding procrastination and developing discipline Slide 16 Dealing with Failure and Setbacks • Reframing failure as a learning opportunity • Building resilience and grit • Developing a growth mindset • Seeking feedback and continuous improvement Slide 17 Technology and Ethics • Understanding digital footprint and online reputation • Responsible use of social media and technology • Privacy concerns and data protection • Ethical considerations in a tech-driven world

Related quizzes

Related quizzes