What is one of the primary goals of anthropology?

To understand and explain the complexities of human culture and behavior.

To promote western values and traditions.

To eliminate cultural differences and create a uniform society.

To dominate and control other cultures.

What is cultural relativism?

The idea that a culture should be understood and judged based on its own values and standards, rather than compared to another culture.

The practice of forcing a culture to conform to western norms.

The belief that one's own culture is superior to all others.

The idea that all cultures are the same.

Which of the following is an example of ethnocentrism?

Believing that your own culture is the best and judging others based on that standard.

Recognizing and appreciating cultural differences.

Being respectful and understanding of other cultures.

Adopting aspects of another culture into your own.

What does the concept of socialization refer to?

The process of learning and internalizing the norms and values of a society.

The domination and control of other cultures.

The elimination of cultural differences and the creation of a uniform society.

The belief in the superiority of western culture.

The scientific study of human social behavior and its origins, development, organizations, and institutions.

The idea that all cultures are the same.

The practice of forcing a culture to conform to western norms.

The belief that one's own culture is superior to all others.

What is a social organization?

The patterns of relationships among individuals and groups in a society.

The process of eliminating cultural differences and creating a uniform society.

The domination and control of other cultures.

The belief in the superiority of western culture.

What is an example of a cultural change?

The legalization of same-sex marriage.

The domination and control of other cultures.

The process of eliminating cultural differences and creating a uniform society.

The belief in the superiority of western culture.

Nature, Goals and Perspectives in Anthropology, Sociology and Political Science Cultural Relativism and Ethnocentrism Concepts, Aspects, and Changes of Culture and Society Social, Political and Economic Symbols and Practices Socialization Social Organizations

Abstract The main focus of this research is to discuss the perspective of the teamwork and its impaction organizational performance and success. Also highlight the Meanings of Team and its work sprit towards batter organizational performance and specific to its impact on the success of organization that provided the basis for this research study. In this research study a thoroughly focus was on organization and teamwork. The aim of this research is to deliver a participative view of teamwork in the organization, and also discourses the major issues and emphases on the recent work that opens the basis to move research onward. There is much worth in taking a more focus on the essential areas of teamwork. The team signifies the spirit and working capacity of the employees as team to bring organization to the success. The various explanations, definitions, processes, dimensions, team size and benefits etc. regarding the above topic teamwork and organizational success is highlighted. Keywords: Teamwork, Success, Organization, Performance, Work Groups, Employees Introduction It is indeed human beings have learned in their beginning of life to work together as (Team) that have made such a remarkable developments as unique specie. Human beings have experience throughout their social history, lived, loved, grow younger to older and worked together in groups said West M.A. (2012).The mutual social knowledge of living and functioning together creates connection among people, society and families. When work is done cooperatively as a team it can achieve extremely extra work than individually. Team can be defined as in the human society to live, to work and to play and to cooperate with others for particular task. According to John W. Newstrom et al (1993) “team is the process of assessing performance of workers, passing information and exploring methods to increase performance”. If observe closely, one can discover the instances of The Government: Research Journal of Political Science Supplementary Edition Vol. III 88 The Government social (teams) they are functioning either effectively or ineffectively everywhere; organizations, schools, work place, home etc. “Coordinating the events of people is like sand house, making by using a sole particles of sand” expressed Belbin, R. M.(2010). Moreover it is one of the general myths that the skill of team member is more important than their vigor, attention and determination for the tasks. Another widespread myth is that the team members are not alone accountable for the achievements or failures of their tasks the truth is that the members are the small parts in the teams and their individual abilities effect on the various results in team. The working relationships exist among team that might sight these relationships at different levels of involvement or relationships among the members as they move towards the degree of communication, integration and commitment increases. Terry L.G. et al (1980) expressed that “The skills are essential if members have to work together efficiently in complex situations, only development of skills and relationships, involvement on the task regarding the particular task might be selected for reaching at target that is considered as a definition of a team”. Team often perform higher when they work together with sprit that enable them to achieve a collective goal at the workplace, it is not only benefits to the organization also affects the workers confidence and success. Cooperating on various tasks reduces workloads for all team members and enables them to share duties or ideas. Work as a team is the part of everyone's life, as one is a member of a family team, staff team, school team, and community teams etc., so as to understand how to work effectively as a team member. Especially there is a need when task is threatened with increasingly many problems for example; the energy problem has effects on organization, family life, and social development and the multi-dimensional nature of many problems require a scientific skill based problem solving approach. Terry L.G, et al (1980) expressed that “The skills, competencies and efforts of team by setting priorities the team can have better impact on the problems solving such efforts can reduce work load, work duplication, and produce a result better than separate efforts”. There are some processes of teamwork by adopting those the objectives can be achieved easily. Le Pine, et al, (2008) identified10 teamwork processes that fall in three categories following are those. TEAMWORK PROCESSES TRANSITION PROCESSES •Mission analysis •Goal specification •Strategy formulation ACTION PROCESSES •Monitoring progress toward goals •Systems monitoring •Team monitoring and backup behavior •Coordination INTERPERSONAL PROCESSES •Conflict management •Motivation and confidence building •Affect management Team Work 89 Teamwork process reduces the work stress on every member which permits members to complete given important task of organization; teamwork offers members an opening to pledge with each other. Also it develops relations between the members who start a teamwork they usually sense appreciated on productive accomplishment of task. It may be cited one of the best instances of surgical team; where surgeon is assisted by his team; nurses, anesthetist and experts etc., everyone knows that their success depends upon the teamwork. In addition they are devoted to the aim that is human life it is easy to succeed with best teamwork. The important role of manager is the team building, trust building, confidence building, in the team to achieve the task. In the Situation where all team members contribute the task, it develops the positive relationship in the team that improves the trust of team members.“Functions effectively members of team must be flexible, committed, trusting each other and help to each other’s in the progress and the achievement of goals” Expressed Plamínek (2008). The accountability of every member in the team must be increased so that they do not let each other down therefore they do their best for the achievements of their teams. In contrast, working alone on a task the pressure is generally high in team in those cases of small confidence impacts fewer on members. Team consists on members who always vary from each other’s in skills, knowledge and abilities but working together that is an opportunity for them to gain skills and knowledge from each other’s that they had never before. Working alone on a task is a challenge and using the ideas of each other brings them to come up with a mutual resolution and the achievement of the task. Nowadays theoretical development and research has rested largely a new trend that is emerging within the organizations as an essential process of teamwork. Teamwork has brought a new move in the research and development to the inputs and outputs that bound, constrain and impact on the team processes within organizations said Ilgen, D.R. (1999). The world is changes fast, any one set of instructions can’t be sufficient, changes needs flexible members, teams and organizations so as to be effective on task. This paper suggests that in teams members must use the exclusive human abilities. Cannon B.et al (1995) has précised dimensions of teams into three categories: Team dimensions 1-Cognitions: include associations, task team-mate characteristics, team mission, objectives, norms, and resources, team role interaction patterns, skills, roles, and team orientation. 2-Skills: consist on adaptability, shared situational awareness and mutual concept to conflict resolution. 90 The Government 3-Attitudes: symbolize motivation, collective potency, shared vision, team cohesion, mutual trust, collective orientation and importance of. Teamsize Researchers have given different approvals about the best size of team as Katzenbachetet al (1993) suggested that the teams should comprise on a dozen or so members which are enough to achieve a task. Although seven is the best size of the team in the organizational practices said Scharf, A. (1989). Several views of researchers are expressed in the literatures and it is difficult to decide which better is because their opinions are based on their own observations. The team size matters in the proper output and performance however from an empirical research it is also difficult to decide the suitable team size and what to accept. This study suggests that team size has a practical link with efficacy such as few or many member shave impact on the performance but size matters. Proper size of team improves the performance maximum stated Campion M. A et al (1996).These different results are expected due to the fact that appropriate team size is required for task, environment and situation where team works. However, larger teams can also experience coordination problems that delay performance. Sheppard, J. A. (1993) expressed that the question of best team’s size is a complex one; more research is required on this topic to explain the impact of team size on given definite task. Literature Review Across many different organizations and industries teamwork is focused to increase the performance of employees’ their unity and also create work culture. Organizations those regularly develop new ideas or products using a project-based approach and assemble teams in order to focus responsibilities to achieve the object. Researchers have given dissimilar meanings of “teams”. Dyer W.G. (2007) said that “teams are groups of people who trust in cooperation, if members are expert the success of goal is more possible”. It is essential due to the problemsolving cooperation added from many minds of team members working on a resolution of problems. Team members contribute their thoughts together to make exclusive plans for dealing with problems and this unity enhance the result due to interaction, trust and teamwork. Teamwork means a "work done by several companions with each doing a part but all subordinating personal prominence to the efficiency of the whole" Merriam, (2012). In addition combined employees are expected less hostile to each other and accepting more of each other’s decisions. Unity of employees can increase the flow of work in organization. When employee’s working together as a team, they learn from each other that awareness is based on their personal experiences and from coworkers; Team Work 91 employees from different departments may acquire knowledge from each other. The main object for organizations is to hold the team effort to achieve output and quality; team is a key to achieve quality productivity. According to Maddux et al (2003) “some of the organizations have major benefits from the use of teamwork which are showed in the following chart: Benefits of Teamwork 1 Improving quality of work life for employees 2 Reducing absenteeism and increasing turnover 3 Increasing innovation and change 4 Improving organizational adaptability and flexibility A real team is mostly one where members are allowed to take decisions that how to complete task. That authority enables them to control the work process, decreases the outside control and increases the sense of duty for work. Team always feels superiority on workplace and they rely on each other’s being there. Plamínek (2008) said that “affiliation with teamwork gives member a sense of belonging, interaction and recognition of success”. These actions support to remove the sense of loneliness of team member in organization. Effective teams can also improve efficacy through communication and trust between the team members, quality of work and decrease in absenteeism contribute to positive impact on team. Involving employees in teamwork helps the organization remain open to new ideas.“The world of organizations is shifting individualism is out and collectivism is in, power is out, empowerment is in.” stated G. M. Parker (1998). This study discovers the experiences and difficulties of teamwork that employees and organizations are facing nowadays due to big transformation and enlarged globalization. In recent years a remarkable amendment has been emerged in the belief of team working organizations. The modern study has explored that the scope of teamwork have been appeared in system rooted in belief, and employees accept changes that denoting a modern organizational system. The organizations which are responsive to the changes appear to achieve greater satisfaction. Although it may be suggested that, the managers should assess the values and beliefs of their employees to play more dedicated role in the development of organization by making sprit to face the modern challenges. Organizational cultural is much significant and it has the excessive impact on the performance of organization and employees’ but it is quiet arguable topic that the culture of teamwork can be developed according to the requirement. It is difficult to specify the relationships and to assess the reliable set of values to use as they believed symbol across the entire organizations. This review study focus that 92 The Government there is a great influence of organizational culture on the assumptions, values, and beliefs on the individuals’ considerations, actions and performances and so is vice versa, through learning, and training process. However the researchers believe that the organizational setup aids to unite employees of diverse cultures and dissimilar social backgrounds, traditions and have their own beliefs to work. Creating a positive teamwork culture it has several diverse aspects are goal setting, conflict resolution, empowerment, ability to accomplish tasks, measuring output and consideration for other teamwork cultures stated Pack L, et al April 27, (2012). Team work in the organization delivers employees the wisdom of unity; understand to each other’s, and reducing conflict. In addition teamwork in organization inspires employee for impartiality by affirming that no one is ignored in the organization and all treated equally. It is known that a team in organization is bound and sincere to work with dedication to bring the success. If the employees are committed and recognize the teamwork values and its benefits, as a part of the organization they can contribute a lot to the achievement of organization. One can finds the informal instances of team at these level, family, society, community, tribe and work groups etc., and formally team appears at the level of departments, functional groups, and other organizational units. The employees feel a greater sense of achievement for being a part of an organization, if they attain team work, having freedom to work not forced. The system gives best performance to achieve recognition and credit from their managers and it will increase their effort that helps them to contribute the organizational performance. Each team batter knows about their role and how to achieve tasks. The true spirit of teamwork gives benefit to organization in maintaining its standard by which it becomes identified. The team defines its specialty, and the way it is doing task that is perceived by the organization as well as its managers and it is secured by appreciation. Employees identify what they believe; that exist in their belief system and those understandings call them to change their views to develop and raise attention towards batter performance. The literature contains sufficient definitions of teamwork and the word team is used to denote a set of generally developed as to learn collective values, attitudes and cooperation to work. The study praises that the teamwork is mostly related with the team success for instance, Wagner (1995) described that “in the team individual is less valued and group is more valued, with”. It is found in the study that individualismcollectivism both regulates the relationships between team size, standing, and cooperation that have better effects on the cooperation of individualists rather than the cooperation of collectivists. Team Work 93 Conclusion The main concentration of this research paper is to examine more in-depth the fundamental of teamwork and its effectiveness to achieve the organizational goals. Teamwork provides vast amounts of knowledge and information, cultural differences each of these building a culture of teamwork and the skill to make the valuable solutions of the problems. To work efficiently, team members need a good understanding of how to do their job, to achieve goal and for that a basic way to ensure understanding is training, then they have to be motivated to do a job. Team is a vital activity of organization, when organization desires to perform sound it has to be confident that team functions effectively. Consequently it is compulsory to know how team performs, what manners within a team happen, and how they make decisions. If there is knowhow of teamwork events, it can be effective for the tasks that they have to accomplish. Organizations build up their own culture through tradition, history and structure these values can be accepted by team workers of an organization. The values and assumptions are the vital tools of organizations and are used as guidance for team. These have to do mostly with the basic dignity and worth of all members of team and the ability, necessity for them to solve the problems and work for the positive change. Through this review study is concluded that there is a good impact of teamwork on the organizations doings and success. Subsequently in recently developed literature there is a great focus amongst the social scientists and scholars’ in their discussion on the above topic teamwork. The above study is also an evidence of little effort to assess the significance of teamwork in organizations success. teams in organiz

UCSP Quiz 1 The Nature and Goals of Anthropology, Sociology and Political Science

NATURE GOAL AND PERSPECT OF ASP

Vocabulary quiz: Urbanization: The movement of population into cities and away from rural areas. Typhoons: A big storm, also known as a cyclone, that forms in tropical waters. The term typhoon is usually used in the Pacific world regions (Asia, Australia, Fiji, New Zealand) Harbor Site: An area where ships dock, usually on coasts that are touching oceans. Mental Map: Maps that you create in your mind from memory (layout of bedroom, neighborhood, school)) Satellite Imagery: A picture of a location from a satellite in space. (Think of a real picture of Earth from space.) Primary Sector: Raw materials from nature. (fish, wood, plants, water, air) Secondary Sector: Raw materials are turned into a product. (factories, lumber mills, manufacturing) Tertiary Sector: Providing a service to the public. (Banking, hotels, teachers) Alliance: When people come together with a common goal to work together. Cultural Diffusion: When culture (language, food, dance, religion) spread to other nearby countries. Push Factors: Social, cultural, environmental, and political factors/events that cause people to migrate away from their homeland. Tuesday 12/3: Directions: W

Classification of plants • Plants can be classified as cultivated and wild plants. • Both cultivated and wild plants are very useful to people, animals and the environment. 1. Cultivated plants: • Cultivated plants are plants grown by people for selling. • They can be grown in the field, vegetable garden, home garden and orchard. Classification of plants 2. Wild plants Wild plants are plants that grow on their own outside the garden, orchard or field. They have many uses such as: • Food for people and animals • Shelter • Source of fuel in form of firewood. • Examples include, grasses, msasa, yellow wood, mahogany, mopane Plant Nutrition • The presence of plant nutrients in the soil make them grow well. • The three major plant nutrients are nitrogen, phosphorus and potassium. Sources of plant nutrients • The source for plant nutrients are grouped into organic and inorganic sources. Organic sources of plant nutrients • These are found in nature. • They are natural materials such, decayed plant and animal matter which include: • Animal manure from cattle, sheep, goats, poultry and pigs. • Green manure • Legume crops like beans, peas and groundnuts. • Humus • These material sources may also be called natural fertilizers. Inorganic sources of plant nutrients • These are sources of plant nutrients made by people in industries. They include: • Compound fertilizers like compound A, B, C and D. • These have two or more nutrients. • Straight fertilizers like ammonium nitrate, single super phosphate and urea. • A straight fertilizer supplies a single or more nutrient to the crop. A straight fertilizer A Compound fertilizer Sources of N,P,K • Ammonium nitrate and Urea- contain nitrogen Double super Phosphate, Single super phosphate-contain phosphorus • Muriate of Potash contains Potassium 2 . Compound fertilisers -have two or three of the three major plant nutrients (N.P.K). N-nitrogen P-phosphorus K-potassium Examples Compound D Wednesday 17 May 2023 Revision exercise (Plant nutrition) 1 .Name the 3 plant nutrients needed by plants. 2. What are the 2 groups of plant nutrients sources? 3. Give 3 examples of organic sources of plant nutrients. 4. What is a straight fertilizer? 5. Compound fertilizer supplies ……………or ………………. Nutrients. Vegetable crops • A vegetable is any part of a plant that is eaten by humans as food part of a meal. • Vegetables are grouped and named according to the part that is eaten. • These are leaf, root, fruit, flower, bulb, tuber and legume vegetables. Leaf vegetables Types of veg Legume etable cropsvegetables Fruit vegetables Root, bulb and tuber Flower vegetables Cabbage Peas Tomato Root: carrots Cauliflower Rape Green beans Pepper Parsnip broccoli Spinach Melons Beetroot Tsunga Cucumber Bulb: onion Lettuce Squash Garlic kale Egg plant Leek chillies Tuber: Irish potato Wednesday 31 May 2023 Vegetable crops 1. What is a vegetable? 2. Which one is not a vegetable from the list below? a. Covo B. cabbage C. wheat D. tomato 3. Choose a vegetable which is not a fruit vegetable. a. tomato B. pepper C. kale D. egg plant 4. From which pair of vegetables do we eat the flower? A. cauliflower and garlic B. broccoli and cauliflower C. broccoli and rape D. cauliflower and pepper 5. Give one example of a vegetable belonging to each of the following groups. a. root b. legume c. bulb 6. Name any 5 groups of vegetable classification according to the parts eaten. Growing leaf vegetables • Although there are many types of vegetables, the leaf, fruit and bulb vegetables are widely grown. • Leaf vegetables form the greater part of vegetable crops. • Leaf vegetables belong to a family called brassica. • Brassicas include cabbages, lettuce, spinach, covo and many others. • Each brassica family has got its own varieties called cultivar. • They usually grow under the same climatic conditions and are affected by the same pests and diseases. • The selection of a variety depends on the following : The intended use of the vegetable, for example, salad, stew or snacks. Days taken to mature. Disease resistant Season of the year Seedbed preparation • Brassica vegetables are usually raised in seedbeds. • The seedbeds are prepared by: • Marking the position of the bed 1 meter in width by any length using a tape measure, hammer and pegs. • Digging a seedbed to a depth of 25 to 30cm using a hoe. • Breaking lumps of soil using a garden rake. Soil requirements • Brassicas need: • Well drained soils. • Fertile soil for good growth • Slightly acidic soils (pH 5.5-6) Climatic requirements • Brassicas need cool to warm temperatures. • Very low temperatures cause cabbages to flower which is called bolting. • Brassicas can be grown throughout the year. Seedbed preparation • Brassica seedlings are usually raised in seedbeds. • A seedbed is prepared by: Marking the position of the bed 1 metre in width by any length using a tape measure, hammer and pegs. Digging a seedbed to depth of 25 to 30 cm using a hoe. Breaking lumps of soil using a garden rake. This is done in order to have a fine tilth and improve soil to seed contact. Making ridges that a 15cm high. Apply 3 to 5kg/m² of well decomposed manure. 60 to 100g/m² of compound fertilizer can be added into the soil. Management of vegetable crops • After transplanting the seedlings, the seedlings need to be looked after. (a)Controlling weeds: all vegetables must be kept weed free. • This is done either by hand pulling weeds or shallow cultivation using a hand fork. (b) Pest control: common pests that affect the brassicas are aphids and diamond black moth larva. • Aphids are small green insects that suck the juice from the leaves leaving them with curls. • They are controlled by spraying malathion using the instructions on the label. (c) Disease control: bacterial diseases are common in brassicas. • Common diseases are black rot and soft rot, especially in cabbages. • These are controlled by: Crop rotation Early planting Planting resistant cultivars (d) Top dressing: brassicas are top dressed using Ammonium Nitrate at a rate of 2.5g per plant. • Top dressing is usually done 3 or 4 weeks after germination. FIELD CROPS • Field crops are crops that are grown on a large piece of land. • Example of field crops:  Maize  Cotton  Groundnuts  Roundnuts  Wheat  Sunflower  Tobacco  Sugar cane  Tea  Coffee  Soya beans  sorghum Classification of field • Field crops can be classified according to use such crops cereal, fibre, sugar and oil. 1. Cereal crops: • A cereal is a grass grown for its edible seeds. • They are also known as grain crops. • The major cereal crops are maize, wheat, rice, barley, sorghum and millet. 2 . fiber crops : • these are crops which are grown for their fiber and are used in making textiles, ropes and rugs. • Important fiber crops are cotton, flax and sisal 3. Oil seed crops: • These crops are grown for the purpose of extracting oil from their seed. • The main oil seed crops are groundnuts, sunflower, soyabean and cotton seed. 4 . Sugar crops : • Sugar crops include sugarcane,

THE FIDE LAWS OF CHESS. Introduction FIDE Laws of Chess cover over-the-board play. The Laws of Chess have two parts: 1. Basic Rules of Play and 2. Competitive Rules of Play. The English text is the authentic version of the Laws of Chess (which were adopted at the 93rd FIDE Congress at Chennai, India) coming into force on 1 January 2023. Preface. The Laws of Chess cannot cover all possible situations that may arise during a game, nor can they regulate all administrative questions. Where cases are not precisely regulated by an Article of the Laws, it should be possible to reach a correct decision by studying analogous situations which are regulated in the Laws. The Laws assume that arbiters have the necessary competence, sound judgement and absolute objectivity. Too detailed a rule might deprive the arbiter of his/her freedom of judgement and thus prevent him/her from finding a solution to a problem dictated by fairness, logic and special factors. FIDE appeals to all chess players and federations to accept this view. A necessary condition for a game to be rated by FIDE is that it shall be played according to the FIDE Laws of Chess. It is recommended that competitive games not rated by FIDE be played according to the FIDE Laws of Chess. Member federations may ask FIDE to give a ruling on matters relating to the Laws of Chess. BASIC RULES OF PLAY. Article 1: The Nature and Objectives of the Game of Chess 1.1 1.2 1.3 1.4 The game of chess is played between two opponents who move their pieces on a square board called a ‘chessboard’. The player with the light-coloured pieces (White) makes the first move, then the players move alternately, with the player with the dark-coloured pieces (Black) making the next move. A player is said to ‘have the move’ when his/her opponent’s move has been ‘made’. The objective of each player is to place the opponent’s king ‘under attack’ in such a way that the opponent has no legal move. 1.4.1 The player who achieves this goal is said to have ‘checkmated’ the opponent’s king and to have won the game. Leaving one’s own king under attack, exposing one’s own king to attack and also ’capturing’ the opponent’s king is not allowed. 1.4.2 The opponent whose king has been checkmated has lost the game. 1.5 If the position is such that neither player can possibly checkmate the opponent’s king, the game is drawn (see Article 5.2.2). Article 2: The Initial Position of the Pieces on the Chessboard 2.1 2.2 The chessboard is composed of an 8 x 8 grid of 64 equal squares alternately light (the ‘white’ squares) and dark (the ‘black’ squares). The chessboard is placed between the players in such a way that the near corner square to the right of the player is white. At the beginning of the game White has 16 light-coloured pieces (the ‘white’ pieces); Black has 16 dark-coloured pieces (the ‘black’ pieces). These pieces are as follows: A white king usually indicated by the symbol K A white queen Two white rooks Two white bishops Two white knights Eight white pawns A black king A black queen Two black rooks Two black bishops Two black knights Eight black pawns usually indicated by the symbol Q usually indicated by the symbol R usually indicated by the symbol B usually indicated by the symbol N usually indicated by the symbol usually indicated by the symbol K usually indicated by the symbol Q usually indicated by the symbol R usually indicated by the symbol B usually indicated by the symbol N usually indicated by the symbol Staunton Pieces p Q K B N R 9 2.3 The initial position of the pieces on the chessboard is as follows: 2.4 The eight vertical columns of squares are called ‘files’. The eight horizontal rows of squares are called ‘ranks’. A straight line of squares of the same colour, running from one edge of the board to an adjacent edge, is called a ‘diagonal’. Article 3: The Moves of the Pieces 3.1 It is not permitted to move a piece to a square occupied by a piece of the same colour. 3.1.1 If a piece moves to a square occupied by an opponent’s piece the latter is captured and removed from the chessboard as part of the same move. 3.1.2 A piece is said to attack an opponent’s piece if the piece could make a capture on that square according to Articles 3.2 to 3.8. 3.1.3 A piece is considered to attack a square even if this piece is constrained from moving to that square because it would then leave or place the king of its own colour under attack. 3.2 The bishop may move to any square along a diagonal on which it stands. 3.3 The rook may move to any square along the file or the rank on which it stands. 3.4 The queen may move to any square along the file, the rank or a diagonal on which it stands. 3.5 3.6 3.7 When making these moves, the bishop, rook or queen may not move over any intervening pieces. The knight may move to one of the squares nearest to that on which it stands but not on the same rank, file or diagonal. 3.7 When making these moves, the bishop, rook or queen may not move over any intervening pieces. The knight may move to one of the squares nearest to that on which it stands but not on the same rank, file or diagonal. The pawn: 3.7.1 The pawn may move forward to the square immediately in front of it on the same file, provided that this square is unoccupied, or 3.7.2 on its first move the pawn may move as in 3.7.1 or alternatively it may advance two squares along the same file, provided that both squares are unoccupied, or 3.7.3 the pawn may move to a square occupied by an opponent’s piece diagonally in front of it on an adjacent file, capturing that piece. 3.7.3.1 A pawn occupying a square on the same rank as and on an adjacent file to an opponent’s pawn which has just advanced two squares in one move from its original square may capture this opponent’s pawn as though the latter had been moved only one square. 3.7.3.2 This capture is only legal on the move following this advance and is called an ‘en passant’ capture. 3.7.3.3 When a player, having the move, plays a pawn to the rank furthest from its starting position, he/she must exchange that pawn as part of the same move for a new queen, rook, bishop or knight of the same colour on the intended square of arrival. This is called the square of ‘promotion’. 3.7.3.4 The player's choice is not restricted to pieces that have been captured previously. 3.7.3.5 This exchange of a pawn for another piece is called promotion, and the effect of the new piece is immediate. 3.8 There are two different ways of moving the king: 3.8.1 by moving to an adjoining square. 3.8.2 by ‘castling’. This is a move of the king and either rook of the same colour along the player’s first rank, counting as a single move of the king and executed as follows: the king is transferred from its original square two squares towards the rook on its original square, then that rook is transferred to the square the king has just crossed. 3.8.2.1 The right to castle has been lost: 3.8.2.1.1 If the king has already moved, or 3.8.2.1.2 With a rook that has already moved. 3.8.2.2 Castling is prevented temporarily: 3.8.2.2.1 if the square on which the king stands, or the square which it must cross, or the square which it is to occupy, is attacked by one or more of the opponent's pieces, or 3.8.2.2.2 if there is any piece between the king and the rook with which castling is to be effected. 3.9 The king in check: 3.9.1 The king is said to be 'in check' if it is attacked by one or more of the opponent's pieces, even if such pieces are constrained from moving to the square occupied by the king because they would then leave or place their own king in check. 3.9.2 No piece can be moved that will either expose the king of the same colour to check or leave that king in check. 3.10 Legal and illegal moves; illegal positions: 3.10.1 A move is legal when all the relevant requirements of Articles 3.1 – 3.9 have been fulfilled. 3.10.2 A move is illegal when it fails to meet the relevant requirements of Articles 3.1 –3.9. 3.10.3 A position is illegal when it cannot have been reached by any series of legal moves. Article 4: The Act of Moving the Pieces 4.1 4.2 Each move must be played with one hand only. Adjusting the pieces or other physical contact with a piece: 4.2.1 Only the player having the move may adjust one or more pieces on their squares, provided that he/she first expresses his/her intention (for example by saying “j’adoube” or “I adjust”). 4.2.2 Any other physical contact with a piece, except for clearly accidental contact, shall be considered to be intent. 4.3 Except as provided in Article 4.2.1, if the player having the move touches on the chessboard, with the intention of moving or capturing: 4.3.1 one or more of his/her own pieces, he/she must move the first piece touched that can be moved. 4.3.2 one or more of his/her opponent’s pieces, he/she must capture the first piece touched that can be captured. 4.3.3 one or more pieces of each colour, he/she must capture the first touched opponent’s piece with his/her first touched piece or, if this is illegal, move or capture the first piece touched that can be moved or captured. If it is unclear whether the player’s own piece or his/her opponent’s was touched first, the player’s own piece shall be considered to have been touched before his/her opponent’s. 4.4 If a player having the move: 4.4.1 touches his/her king and a rook he/she must castle on that side if it is legal to do so 4.4.2 deliberately touches a rook and then his/her king he/she is not allowed to castle on that side on that move and the situation shall be governed by Article 4.3.1. 4.4.3 intending to castle, touches the king and then a rook, but castling with this rook is illegal, the player must make another legal move with his/her king (which may include castling with the other rook). If the king has no legal move, the player is free to make any legal move. 4.4.4 promotes a pawn, the choice of the piece is finalised when the piece has touched the square of promotion. 4.5 4.6 If none of the pieces touched in accordance with Article 4.3 or Article 4.4 can be moved or captured, the player may make any legal move. The act of promotion may be performed in various ways: 4.6.1 the pawn does not have to be placed on the square of arrival. 4.6.2 removing the pawn and putting the new piece on the square of promotion may occur in any order. 4.6.3 If an opponent’s piece stands on the square of promotion, it must be captured. 4.7 When, as a legal move or part of a legal move, a piece has been released on a square, it cannot be moved to another square on this move. The move is considered to have been made in the case of: 4.7.1 A capture, when the captured piece has been removed from the chessboard and the player, having placed his/her own piece on its new square, has released this capturing piece from his/her hand. 4.7.2 Castling, when the player's hand has released the rook on the square previously crossed by the king. When the player has released the king from his/her hand, the move is not yet made, but the player no longer has the right to make any move other than castling on that side, if this is legal. If castling on this side is illegal, the player must make another legal move with his/her king (which may include castling with the other rook). If the king has no legal move, the player is free to make any legal move. 4.7.3 Promotion, when the player's hand has released the new piece on the square of promotion and the pawn has been removed from the board. 4.8 4.9 A player forfeits his/her right to claim against his/her opponent’s violation of Articles 4.1 – 4.7 once the player touches a piece with the intention of moving or capturing it. 4.8. A player forfeits his/her right to claim against his/her opponent’s violation of Articles 4.1 – 4.7 .4.9. If a player is unable to move the pieces, an assistant, who shall be acceptable to the arbiter, may be provided by the player to perform this operation. Article 5: The Completion of the Game 5.1.1 The game is won by the player who has checkmated his/her opponent’s king. This immediately ends the game, provided that the move producing the checkmate position was in accordance with Article 3 and Articles 4.2 – 4.7. 5.1.2 The game is lost by the player who declares he/she resigns (this immediately ends the game), unless the position is such that the opponent cannot checkmate the player’s king by any possible series of legal moves. In this case the result of the game is a draw. 5.2.1 The game is drawn when the player to move has no legal move and his/her king is not in check. The game is said to end in ‘stalemate’. This immediately ends the game, provided that the move producing the stalemate position was in accordance with Article 3 and Articles 4.2 – 4.7. 5.2.2 The game is drawn when a position has arisen in which neither player can checkmate the opponent’s king with any series of legal moves. The game is said to end in a ‘dead position’. This immediately ends the game, provided that the move producing the position was in accordance with Article 3 and Articles 4.2 – 4.7. 5.2.3 The game is drawn upon agreement between the two players during the game, provided both players have made at least one move. This immediately ends the game. COMPETITIVE RULES OF PLAY Article 6: The Chessclock 6.1 ‘Chessclock’ means a clock with two time displays, connected to each other in such a way that only one of them can run at a time. ‘Clock’ in the Laws of Chess means one of the two time displays. Each time display has a ‘flag’. ‘Flag-fall’ means the expiration of the allotted time for a player. 6.2 Handling the chessclock: 6.2.1 During the game each player, having made his/her move on the chessboard, shall pause his/her own clock and start his/her opponent’s clock (that is to say, he/she shall press his/her clock). This “completes” the move. A move is also completed if: 6.2.1.1 6.2.1.2 the move ends the game (see Articles 5.1.1, 5.2.1, 5.2.2, 9.2.1, 9.6.1 and 9.6.2), or the player has made his/her next move, when his/her previous move was not completed. 6.2.2 A player must be allowed to pause his/her clock after making his/her move, even after the opponent has made his/her next move. The time between making the move on the chessboard and pressing the clock is regarded as part of the time allotted to the player. 6.2.3 A player must press his/her clock with the same hand with which he/she made his/her move. It is forbidden for a player to keep his/her finger on the clock or to ‘hover’ over it. 6.2.4 The players must handle the chessclock properly. It is forbidden to press it forcibly, to pick it up, to press the clock before moving or to knock it over. Improper clock handling shall be penalised in accordance with Article 12.9. 6.2.5 6.2.6 Only the player whose clock is running is allowed to adjust the pieces. If a player is unable to use the clock, an assistant, who must be acceptable to the arbiter, may be provided by the player to perform this operation. His/Her clock shall be adjusted by the arbiter in an equitable way. This adjustment of the clock shall not apply to the clock of a player with a disability. 6.3 Allotted time: 6.3.1 When using a chessclock, each player must complete a minimum number of moves or all moves in an allotted period of time including any additional amount of time added with each move. All these must be specified in advance. 6.3.2 The time saved by a player during one period is added to his/her time available for the next period, where applicable. In the time-delay mode both players receive an allotted ‘main thinking time’. Each player also receives a ‘fixed extra time’ with every move. The countdown of the main thinking time only commences after the fixed extra time has expired. Provided the player presses his/her clock before the expiration of the fixed extra time, the main thinking time does not change, irrespective of the proportion of the fixed extra time used. 6.4 Immediately after a flag falls, the requirements of Article 6.3.1 must be checked. 6.5 Before the start of the game the arbiter shall decide where the chessclock is placed. 6.6 At the time determined for the start of the game White’s clock is started.6.7. Default time: 6.7.1 The regulations of an event shall specify a default time in advance. If the default time is not specified, then it is zero. Any player who arrives at the chessboard after the default time shall lose the game unless the arbiter decides otherwise. 6.7.2 If the regulations of an event specify that the default time is not zero and if neither player is present initially, White shall lose all the time that elapses until he/she arrives, unless the regulations of an event specify, or the arbiter decides otherwise. 6.8 A flag is considered to have fallen when the arbiter observes the fact or when either player has made a valid claim to that effect. 6.9 Except where one of Articles 5.1.1, 5.1.2, 5.2.1, 5.2.2, 5.2.3 applies, if a player does not complete the prescribed number of moves in the allotted time, the game is lost by that player. However, the game is drawn if the position is such that the opponent cannot checkmate the player’s king by any possible series of legal moves. 6.10 Chessclock setting: 6.10.1 Every indication given by the chessclock is considered to be conclusive in the absence of any evident defect. A chessclock with an evident defect shall be replaced by the arbiter, who shall use his/her best judgement when determining the times to be shown on the replacement chessclock. 6.10.2 If during a game it is found that the setting of either or both clocks is incorrect, either player or the arbiter shall pause the chessclock immediately. The arbiter shall install the correct setting and adjust the times and move-counter, if necessary he/she shall use his/her best judgement when determining the clock settings. 6.11.1 If the game needs to be interrupted, the arbiter shall pause the chessclock. 6.11.2 A player may pause the chessclock only in order to seek the arbiter’s assistance, for example when promotion has taken place and the piece required is not available. 6.11.3 The arbiter shall decide when the game restarts. 6.11.4 If a player pauses the chessclock in order to seek the arbiter’s assistance, the arbiter shall determine whether the player had any valid reason for doing so. If the player has no valid reason for pausing the chessclock, the player shall be penalised in accordance with Article 12.9. 6.12.1 Screens, monitors, or demonstration boards showing the current position on the chessboard, the moves and the number of moves made/completed, and clocks which also show the number of moves, are allowed in the playing hall. 6.12.2 The player may not make a claim relying only on information shown in this manner.

Related quizzes

Related quizzes