What is the primary purpose of wearing a hard hat in a work environment?

To protect the head from falling objects

In which situation is it most appropriate to wear safety goggles?

When working with hazardous chemicals

What is the primary function of a face shield in Personal Protective Equipment (PPE)?

To protect the face from splashes and impacts

Personal Protective Equipment (PPE)

The importance of using Personal Protective Equipment (PPE) in a workshop environment to shield or protect your body from workshop hazards.

Kindly create a 30 items multiple choice test from this laboratory activity entitled laboratory do's and donts: LABORATORY SAFETY Dos: Wear Appropriate Attire: Wear lab coats, safety goggles, gloves, and any other required personal protective equipment (PPE) at all times in the lab. Follow Protocols: Adhere strictly to established protocols and procedures for all experiments and tasks. Label Everything: Clearly label all containers, tubes, vials, and equipment with relevant information, including date, contents, and your initials. Calibrate Instruments: Regularly calibrate and maintain all lab equipment according to manufacturer guidelines to ensure accurate measurements. Keep Workspace Organized: Maintain a clean and organized workspace to prevent contamination and ensure efficient work. Dispose of Waste Properly: Follow the correct disposal procedures for hazardous waste, sharps, and non-hazardous materials in accordance with local regulations. Use Pipette Aids: Always use pipette aids or bulb fillers to avoid mouth pipetting and potential exposure to hazardous substances. Record Observations: Keep detailed and accurate records of your experiments, observations, procedures, and results. Label Samples Clearly: Label all samples with accurate and descriptive information to avoid mix-ups and confusion. Communicate: Maintain clear communication with colleagues and supervisors about your work, findings, and any potential issues. Follow Safety Guidelines: Adhere to all safety guidelines, emergency procedures, and evacuation plans in case of accidents or incidents. Report Accidents and Incidents: Report any accidents, spills, or incidents to your supervisor immediately, no matter how minor they may seem. Don'ts: Don't Eat, Drink, or Smoke: Never consume food, drinks, or smoke inside the laboratory to prevent contamination and chemical exposure. Don't Pipette by Mouth: Avoid mouth pipetting to prevent the risk of inhaling or ingesting hazardous substances. Don't Use Chipped Glassware: Do not use chipped, cracked, or compromised glassware, as they can lead to leaks and contamination. Don't Work Alone: Avoid working in the lab alone, especially with hazardous materials or equipment. Don't Ignore Safety Procedures: Never disregard safety procedures or skip steps, even if you're experienced with a particular task. Don't Contaminate Reagents: Avoid contaminating reagents by using clean tools, pipettes, and containers. Don't Rush: Take your time and follow protocols accurately. Rushing can lead to mistakes and unsafe conditions. Don't Block Emergency Equipment: Keep emergency equipment, such as eyewash stations, fire extinguishers, and safety showers, unobstructed and easily accessible. Don't Pour Chemicals into Sinks: Do not pour chemicals down sinks unless you are certain they are safe to do so, as this can lead to environmental contamination. Don't Use Unlabeled Chemicals: Never use unlabeled or improperly labeled chemicals. Always know what you're working with. Don't Wear Loose Clothing or Jewelry: Avoid wearing loose clothing, open-toed shoes, and excessive jewelry that could get caught in equipment or chemicals. Don't Assume, Ask: If you're unsure about something, never assume. Always ask for guidance from your supervisor or colleague

7.018 Safe Injection Practices (Refer to 7.07 Safe Injection Policy) Environment of Care: Active participation with all identified projects to assess compliance with infection control standards. . Surveillance, Control, and Reporting includes: Baseline information about the frequency and type of nosocomial infections. Identification of patients and/or staff with communicable or potentially communicable infections. Patients identified with a communicable disease will be isolated from other patients in the facility or, if this is not possible, they will be transferred to a local hospital for care or rescheduled. Identification of clusters of microorganisms or significant deviations from endemic level. Reporting to committees and outside agencies, when required. Investigation of infections as needed. Immediate implementation of corrective and preventive measures that result in improvements. The Infection Control nurse or designated staff member will perform facility audits and report results to the QI committee and Board of Managers. EVALUATION Evaluation and improvement of the infection prevention and control activities are important steps in the Center’s efforts to control and prevent infection. Infection prevention and control practices should become a routine part of the care, treatment, or services the center provides to patients. Patients expect and deserve hygienic and safe care even if their contact with the Center does not extend beyond a single visit. Continuous review of the goals, activities, and outcomes of the Center’s initiative are therefore followed by improvement activities that are realistic in expectation and, above all, effective. Evaluation of the plan shall include but not be limited to: Evaluation of the infection prevention and control activities annually and whenever risks significantly change. The evaluation includes a review of the following: The infection prevention and control prioritized risks The infection prevention and control goals. Implementation of infection prevention and control Outcomes of infection prevention and control activities. Findings from the evaluation are communicated at least annually to the Quality Management Committee References: http://oneandonlycampaign.org/content/what-are-they-why-follow-them. Centers for Disease Control and Prevention (CDC). (2004). Guidance for the Selection and Use of Personal Protective Equipment (PPE) in Healthcare Settings. Retrieved January 29, 2015 from www.cdc.gov/niosh/topics/bbp/sharps.html. Centers for Disease Control and Prevention (CDC). (2003). Guidelines for Environmental Infection Control in Health-Care Facilities 52(RR10);1-42. Retrieved January 29, 2015 from http://www.cdc.gov/mmwr/preview/mmwrhtml/rr5210a1.htm. Centers for Disease Control and Prevention (CDC). (2002). Guideline for Hand Hygiene in Health-Care Settings: Recommendations of the Healthcare Infection Control Practices Advisory Committee and the HICPAC/SHEA/APIC/IDSA Hand Hygiene Task Force. MMWR. 51(RR-16). Retrieved January 29, 2015 from http://www.cdc.gov/mmwr/preview/mmwrhtml/rr5116a1.htm. Centers for Disease Control and Prevention (CDC). (2008). Sharps Safety Workbook. Retrieved April 24 2014 from http://www.cdc.gov/sharpssafety/pdf/workbookcomplete.pdf. Guideline for Infection Control in Healthcare Personnnel available at: Guideline for Infection Control in Healthcare Personnel available at: http://www.cdc.gov/hicpac/pdf/InfectControl98.pdf Immunization of HealthCare Personnel, guidance available at: http://www.cdc.gov/vaccines/spec-grps/hcw.htm Occupational Safety & Health Administration (OSHA) Bloodborne Pathogens and Needlestick Prevention Standards available at: http://www.osha.gov/SLTC/bloodbornepathogens/index.html Sax H, et al. (2007). My five moments for hand hygiene: A user-centered design approach to understand, train, monitor and report hand hygiene. For the World Health Organization. J Hosp Infect 67(1):9–21. World Health Organization (WHO). (2005). World Alliance for Patient Safety. WHO Guidelines on Hand Hygiene in Health Care. Retrieved January 29 , 2015 from http://www.who.int/patientsafety/events/05/HH_en.pdf.

Personal protective equipment

occupational safety and health(personal protective equipment)

Introduction to Personal Protective Equipment in Healthcare - Starter Quiz

Identify the following Personal Protective Equipment by writing its name on your paper.

1. Flammable materials, like alcohol, should never be dispensed or used near A. an open door. B. an open flame. C. another student. D. a sink. 2. If a laboratory fire erupts, immediately A. notify your instructor. B. run for the fire extinguisher. C. throw water on the fire. D. open the windows. 3. Approved eye protection devices (such as goggles) are worn in the laboratory A. to avoid eye strain. B. to improve your vision. C. only if you don’t have corrective glasses. D. any time chemicals, heat or glassware are used. 4. If you wear contact lenses in the school laboratory, A. take them out before starting the lab. B. you do not have to wear protective goggles. C. advise your science instructor that you wear contact lenses. D. keep the information to yourself. 5. If you do not understand a direction or part of a lab procedure, you should A. figure it out as you do the lab. B. try several methods until something works. C. ask the instructor before proceeding. D. skip it and go on to the next part. 6. After completing an experiment, all chemical wastes should be A. left at your lab station for the next class. B. disposed of according to your instructor’s directions. C. dumped in the sink. D. taken home. 7. If a lab experiment is not completed, you should A. discuss the issue with your instructor. B. sneak in after school and work alone. C. come in during lunch and finish while eating lunch. D. make up some results. 8. You are heating a substance in a test tube. Always point the open end of the tube A. toward yourself. B. toward your lab partner. C. toward another classmate. D. away from all people. Science Laboratory Safety teSt 9. You are heating a piece of glass and now want to pick it up. You should A. use a rag or paper towels. B. pick up the end that looks cooler. C. use tongs. D. pour cold water on it. 10. You have been injured in the laboratory (cut, burn, etc.). First you should A. visit the school nurse after class. B. see a doctor after school. C. tell the science instructor at once. D. apply first aid yourself. 11. When gathering glassware and equipment for an experiment, you should A. read all directions carefully to know what equipment is necessary. B. examine all glassware to check for chips or cracks. C. clean any glassware that appears dirty. D. All of the above. 12. You want to place a piece of glass tubing into a rubber stopper after the tubing has been fire polished and cooled. This is best done by A. lubricating the tubing with water or glycerin. B. using a towel or cotton gloves for protection. C. twisting the tubing and stopper carefully. D. all of the above. 13. Personal eyeglasses provide as much protection as A. a face shield. B. safety glasses. C. splashproof chemical goggles. D. none of the above. 14. Long hair in the laboratory must be A. cut short. B. held away from the experiment with one hand. C. always neatly groomed. D. tied back or kept entirely out of the way with a hair band, hairpins, or other confining device. 15. In a laboratory, the following should not be worn. A. loose clothing. B. dangling jewelry. C. sandals. D. all of the above. 16. The following footwear is best in the laboratory. A. sandals B. open-toed shoes C. closed-toed shoes D. shoes appropriate for the weather3 © 2017 Flinn Scientific, Inc. All Rights Reserved. 17. Horseplay or practical jokes in the laboratory are A. always against the rules. B. okay. C. not dangerous. D. okay if you are working alone. 18. If a piece of equipment is not working properly, stop, turn it off, and tell A. the custodian. B. your lab partner. C. your best friend in the class. D. the science instructor. 19. If an acid is splashed on your skin, wash at once with A. soap. B. oil. C. weak base. D. plenty of water. 20. When you finish working with chemicals, biological specimens, and other lab substances, always A. treat your hands with skin lotion. B. wash your hands thoroughly with soap and water. C. wipe your hands on a towel. D. wipe your hands on your clothes. True—False T F 22. ■ ■ Hot glass looks the same as cold glass. 23. ■ ■ All chemicals in the lab are to be considered dangerous. 24. ■ ■ Return all unused chemicals to their original containers. 25. ■ ■ Work areas should be kept clean and tidy. 26. ■ ■ Pipets are used to measure and dispense small amounts of liquids. You should draw the liquid into the pipet using your mouth. 27. ■ ■ Laboratory work can be started immediately upon entering the laboratory even if the instructor is not yet present. 28. ■ ■ Never remove chemicals or other equipment from the laboratory. T F 29. ■ ■ Chipped or cracked glassware is okay to use. 30. ■ ■ Read all procedures thoroughly before entering the laboratory. 31. ■ ■ All unauthorized experiments are prohibited. 32. ■ ■ You are allowed to enter the chemical preparation/storage area any time you need to get an item. 33. ■ ■ Laboratory aprons should be worn during all lab activities. 34. ■ ■ It’s okay to pick up broken glass with your bare hands as long as the glass is placed in the trash. 35. ■ ■ Never leave a lit burner unattended. 21. Draw a diagram of your science room and label the locations of the following: ■ Fire Blanket ■ Fire Extinguisher(s) ■ Exits ■ Eyewash Station ■ Emergency Shower ■ Closest Fire Alarm Station ■ Waste Disposal Container(s)4 © 2017 Flinn Scientific, Inc. All Rights Reserved. Name: ________________________________________________ Date: ______________________________________________ 1. Flammable materials, like alcohol, should never be dispensed or used near A. an open door. B. an open flame. C. another student. D. a sink. 2. If a laboratory fire erupts, immediately A. notify your instructor. B. run for the fire extinguisher. C. throw water on the fire. D. open the windows. 3. Approved eye protection devices (such as goggles) are worn in the laboratory A. to avoid eye strain. B. to improve your vision. C. only if you don’t have corrective glasses. D. any time chemicals, heat or glassware are used. 4. If you wear contact lenses in the school laboratory, A. take them out before starting the lab. B. you do not have to wear protective goggles. C. advise your science instructor that you wear contact lenses. D. keep the information to yourself. 5. If you do not understand a direction or part of a lab procedure, you should A. figure it out as you do the lab. B. try several methods until something works. C. ask the instructor before proceeding. D. skip it and go on to the next part. 6. After completing an experiment, all chemical wastes should be A. left at your lab station for the next class. B. disposed of according to your instructor’s directions. C. dumped in the sink. D. taken home. 7. If a lab experiment is not completed, you should A. discuss the issue with your instructor. B. sneak in after school and work alone. C. come in during lunch and finish while eating lunch. D. make up some results. 8. You are heating a substance in a test tube. Always point the open end of the tube A. toward yourself. B. toward your lab partner. C. toward another classmate. D. away from all people. Science Laboratory Safety teSt 9. You are heating a piece of glass and now want to pick it up. You should A. use a rag or paper towels. B. pick up the end that looks cooler. C. use tongs. D. pour cold water on it. 10. You have been injured in the laboratory (cut, burn, etc.). First you should A. visit the school nurse after class. B. see a doctor after school. C. tell the science instructor at once. D. apply first aid yourself. 11. When gathering glassware and equipment for an experiment, you should A. read all directions carefully to know what equipment is necessary. B. examine all glassware to check for chips or cracks. C. clean any glassware that appears dirty. D. All of the above. 12. You want to place a piece of glass tubing into a rubber stopper after the tubing has been fire polished and cooled. This is best done by A. lubricating the tubing with water or glycerin. B. using a towel or cotton gloves for protection. C. twisting the tubing and stopper carefully. D. all of the above. 13. Personal eyeglasses provide as much protection as A. a face shield. B. safety glasses. C. splashproof chemical goggles. D. none of the above. 14. Long hair in the laboratory must be A. cut short. B. held away from the experiment with one hand. C. always neatly groomed. D. tied back or kept entirely out of the way with a hair band, hairpins, or other confining device. 15. In a laboratory, the following should not be worn. A. loose clothing. B. dangling jewelry. C. sandals. D. all of the above. 16. The following footwear is best in the laboratory. A. sandals B. open-toed shoes C. closed-toed shoes D. shoes appropriate for the weather5 © 2017 Flinn Scientific, Inc. All Rights Reserved. 17. Horseplay or practical jokes in the laboratory are A. always against the rules. B. okay. C. not dangerous. D. okay if you are working alone. 18. If a piece of equipment is not working properly, stop, turn it off, and tell A. the custodian. B. your lab partner. C. your best friend in the class. D. the science instructor. 19. If an acid is splashed on your skin, wash at once with A. soap. B. oil. C. weak base. D. plenty of water. 20. When you finish working with chemicals, biological specimens, and other lab substances, always A. treat your hands with skin lotion. B. wash your hands thoroughly with soap and water. C. wipe your hands on a towel. D. wipe your hands on your clothes. 21. Draw a diagram of your science room and label the locations of the following: ■ Fire Blanket ■ Fire Extinguisher(s) ■ Exits ■ Eyewash Station ■ Emergency Shower ■ Closest Fire Alarm Station ■ Waste Disposal Container(s) True—False T F 22. ■ ■ Hot glass looks the same as cold glass. 23. ■ ■ All chemicals in the lab are to be considered dangerous. 24. ■ ■ Return all unused chemicals to their original containers. 25. ■ ■ Work areas should be kept clean and tidy. 26. ■ ■ Pipets are used to measure and dispense small amounts of liquids. You should draw the liquid into the pipet using your mouth. 27. ■ ■ Laboratory work can be started immediately upon entering the laboratory even if the instructor is not yet present. 28. ■ ■ Never remove chemicals or other equipment from the laboratory. T F 29. ■ ■ Chipped or cracked glassware is okay to use. 30. ■ ■ Read all procedures thoroughly before entering the laboratory. 31. ■ ■ All unauthorized experiments are prohibited. 32. ■ ■ You are allowed to enter the chemical preparation/storage area any time you need to get an item. 33. ■ ■ Laboratory aprons should be worn during all lab activities. 34. ■ ■ It’s okay to pick up broken glass with your bare hands as long as the glass is placed in the trash. 35. ■ ■ Never leave a lit burner unattended.

Related quizzes

Related quizzes