Read the following definitions and choose the correct term for it.

1. What is the main purpose of including theme and main idea questions in a text? a) To test your reading comprehension skills b) To understand the overall message or lesson of the text c) To practice identifying specific details in the text d) To improve your vocabulary and word knowledge 2. What is the purpose of finding the theme in a text? a) To summarize the main idea of the text in a few words b) To identify the specific details and examples in the text c) To understand the order of events in the text d) To analyze the author's writing style and techniques 3. Which of the following represents the theme of a text? a) A long sentence that describes the setting of the story b) A single word or short phrase that captures the main idea of the text c) A list of characters and their traits d) A detailed description of the plot and conflict in the story 4. How does identifying the main idea of a paragraph help you understand the text? a) It allows you to make connections between different parts of the text b) It helps you identify the author's purpose for writing the text c) It enables you to predict what will happen next in the story d) It helps you remember the specific details and examples in the paragraph 5. Which of the following best describes the main idea of a paragraph? a) The specific details and examples that support the theme of the text b) The order of events and actions in the paragraph c) The overall message or lesson conveyed by the paragraph d) The vocabulary words and their definitions in the paragraph 6. In a short paragraph about dogs, what could be a possible theme? a) Running and playing in the park b) Different breeds of dogs and their characteristics c) The loyalty and companionship dogs provide d) How to train a dog to do tricks 7. What might be the main idea of a paragraph about the importance of recycling? a) Recycling reduces pollution and conserves natural resources b) The process of recycling and how it works c) The different types of materials that can be recycled d) The history of recycling and its impact on society 8. Which of the following could be the theme of a paragraph about the benefits of reading? a) The importance of reading for academic success b) How to choose the right book to read c) The different genres of literature and their characteristics d) The role of libraries in promoting reading 9. If a paragraph discusses the life cycle of a butterfly, what would be the most likely main idea? a) The different colors and patterns of butterfly wings b) The stages of a butterfly's life from egg to adult c) The habitats and environments where butterflies live d) The types of plants that attract butterflies for feeding 10. What is the purpose of including vocabulary words and their meanings in context in a text? a) To test your knowledge of different words and their definitions b) To understand the specific details and examples in the text c) To improve your reading comprehension skills d) To practice using new words in your own writing

In this video we take a look at the 0:02 fetch to code 0:03 execute cycle including its effect on 0:06 the various registers we've previously 0:12 [Music] 0:14 discussed a computer is defined Definition 0:17 as an electronic device that takes an 0:20 input 0:22 processes data 0:25 and delivers output 0:29 in this simple example you can see we're 0:31 taking the input 5 0:35 we're multiplying it by 2 that's our 0:37 process 0:39 and we're outputting 10. 0:44 but this could be way more complex for 0:46 example of a game console 0:48 the input could be the buttons you press 0:50 on a controller 0:53 the processes would then be carried out 0:55 by the console itself 0:59 and the output would be some form of 1:01 update to a monitor 1:02 and sound out for a speaker possibly 1:04 vibration feedback through the 1:06 controller 1:10 to process data a computer follows a set 1:13 of instructions 1:14 known as a computer program 1:18 if we take the lid off a typical desktop 1:20 computer we can identify 1:22 two critical components the memory 1:26 that stores the program and the central 1:29 processing unit or processor 1:31 which is under this large fan and 1:33 carries out the instructions 1:37 a computer carries out its function by 1:40 fetching 1:41 instructions decoding them and then 1:43 executing them 1:44 in a continuous repetitive cycle 1:46 billions of times a second 1:48 let's look at each of these stages in a 1:50 little more detail Fetch 1:53 so let's start with the fetch stage the 1:55 very first thing that happens 1:57 is the program counter is checked as it 2:00 holds the address 2:01 of the next instruction to be executed 2:07 the address stored is then copied into 2:09 the memory address register 2:14 the address is then sent along the 2:16 address bus to main memory 2:18 where it waits to receive a signal from 2:21 the control 2:22 bus so it knows what to do 2:27 as we want to read the data that's 2:29 stored in memory address 2:30 0 0 0 0 the control unit sends 2:34 a read signal along the control bus to 2:36 main memory 2:41 now main memory knows the data needs to 2:44 be read 2:45 the content stored in memory address 000 2:49 can be sent along the data bus to the 2:51 memory data register 2:56 now as we're currently in the process of 2:58 fetching an instruction 3:00 the data received by the memory data 3:03 register gets copied 3:04 into the current instruction register 3:11 the instruction effectively has now been 3:14 fetched from memory 3:16 just before we proceed to the decode 3:18 phase we now 3:19 increment the program counter so that 3:22 the address it contains 3:24 points to the address of the next 3:26 instruction which will need to be 3:30 executed 3:32 the instruction now being held in the 3:33 current instruction register 3:35 is ready to be decoded 3:39 now as we mentioned in the previous 3:41 video the instruction is made up of two 3:43 parts 3:44 we have the op code that's what it is we 3:47 need to do 3:50 and we have the operand what are we 3:53 going to do it to 3:55 now the operand could contain the actual 3:57 data 3:58 or indeed it could contain an address of 4:01 where the data is to be found 4:06 by decoding this instruction we can see 4:08 the operation we need 4:10 is a load operation so we need to load 4:14 the contents of memory location0101 4:18 into the cpus accumulator 4:25 in the exam a simple model will be used 4:27 to describe the 4:29 structure of any given instruction 4:32 you're not going to be expected to 4:34 define how an opcode is made up 4:36 but simply to interpret opcodes in the 4:39 given context of an exam 4:40 question in the example here 4:44 you can see there's a total of 16 4:46 different opcodes available 4:48 and this is because we're using four 4:50 bits for our representation 4:56 so now we've fetched the instruction and 4:59 we've decoded it so we know what we need 5:00 to do 5:01 we're finally ready to execute it 5:05 so we now send address 0101 5:08 to the memory dress register 5:13 now we're in the memory address register 5:15 we can finally send the address 5:18 down the address bus to main memory 5:24 this time we want to read the data 5:26 that's stored in memory 5:28 and so the control unit again sends a 5:30 read signal along the control bus 5:36 so main memories now receive an address 5:38 and a read signal 5:40 so the content stored at memory location 5:43 0101 5:44 can now be sent along the data bus back 5:46 to the cpu 5:47 and into the memory data register 5:54 finally the contents of the memory data 5:56 register are copied to the accumulator 5:59 and this is one of a number of general 6:00 purpose registers found in the cpu 6:04 this first instruction is now complete Branching 6:11 so what does this program actually do 6:14 you should be able to work it through 6:16 carefully and figure it out 6:19 we're now pointing instructions zero 6:21 zero zero one in the program counter 6:23 and we're ready to fetch the second 6:25 instruction 6:27 at the end of this video we're gonna 6:29 provide you with the answer 6:34 so let's talk a second about programs 6:37 that branch 6:40 on the left here we have a very simple 6:42 piece of pseudo code 6:44 line zero says first execute this line 6:46 of code 6:47 line 1 now execute this line and then 6:50 line 2 says 6:52 if the age is greater than 18 then 6:56 we're going to execute lines 3 and 4 6:58 otherwise 6:59 we're going to execute lines six and 7:02 seven 7:03 so this program doesn't necessarily 7:05 follow strictly in sequence from line 7:07 zero through to seven there's a chance 7:10 here the program may branch and jump 7:14 around 7:16 so we're going to pretend that this 7:17 program has been loaded into memory 7:20 each line of code on the left here has 7:23 ended up 7:24 as a location in memory now this is not 7:27 strictly how this would happen in this 7:28 one-to-one way 7:29 but for the purpose of example it's 7:31 absolutely fine 7:35 so the program counter starts by 7:37 pointing to memory address zero 7:39 and we fetch the first instruction 7:41 decode it and execute it 7:44 it then updates and tells us the next 7:47 instruction 7:48 is zero zero zero one because remember 7:50 the program counter is being incremented 7:52 so we fetch it decode it and we execute 7:55 line one of our program 7:59 we then fetch line two which in binary 8:01 is one 8:02 zero 8:06 now at this point depending on what 8:10 happens during the execution 8:11 of line two the program may be required 8:15 to fetch line three from memory or 8:18 line five from memory 8:25 so let's look at how this actually works 8:27 because we've said the program counter 8:28 simply gets incremented 8:31 well in the current instruction register 8:33 we have an instruction with the op code 8:36 0 1 1 0. 8:41 now when we look this up in the decode 8:43 unit we discover that this 8:45 code means branch always 8:51 this replaces the value held in the 8:54 program counter 8:56 with the contents of the operand that's 8:58 the second part of the instruction 9:01 from the current instruction register so 9:03 this case 9:04 one zero zero one 9:09 now when the next fetch cycle begins the 9:12 program counter is obviously checked 9:14 and as its contents have been previously 9:16 updated to a new memory location 9:19 and not simply incremented the program 9:22 effectively is able to jump 9:24 around memory 9:28 so having watched this video you should 9:30 be able to answer the following key 9:32 question 9:33 how does a cpu work 9:39 okay so let's um answer the question we 9:41 posed 9:42 earlier what did that program actually 9:48 do 9:50 so this is the first fetch to code 9:53 execute cycle 9:55 and this is the one that we ran through 9:57 in detail earlier 9:58 it effectively loaded the contents of 10:01 the memory 10:02 stored at location location0101 10:05 into the accumulator in other words 10:08 the dna number 3 is moved 10:11 from memory into the cpu 10:18 we then proceed onto the second fetch 10:20 decode execute cycle 10:23 now this one adds the contents of memory 10:27 located at 0 1 1 0 10:30 to the current contents of the 10:32 accumulator 10:34 so in other words the dna number one 10:38 because that's what's stored at address 10:40 zero one one zero 10:43 is added to the number three that was in 10:45 the accumulator 10:46 the results are stored back over the 10:48 accumulator 10:49 so effectively we've done three plus one 10:53 equals four 10:58 the third fetch to code execute cycle 11:00 stores the contents which are in the 11:02 accumulator 11:03 into memory location zero one one one 11:07 and that's because the op code the first 11:09 part of this current instruction 11:10 zero zero one one is the command to 11:13 store when we look it up in the decoder 11:15 unit 11:16 so in other words the result of the 11:17 previous calculation three plus one 11:19 equals four 11:20 is now written back into main memory 11:28 the fourth fetch decode execute cycle 11:30 outputs the contents of the accumulator 11:33 remember they were copied into main 11:34 memory but they're still held in the 11:35 accumulator 11:37 so in this simple abstraction the number 11:40 four is now 11:41 output to the user so they can see the 11:43 result of the calculation 11:49 the fifth and final fetch code execute 11:51 cycle 11:52 brings a halt to the current program 11:58 so this very simple program which has 12:01 five 12:02 fetch decode execute cycles has 12:04 performed the calculation 12:06 three plus one is then stored the result 12:09 in main memory 12:10 and displayed the result four to the 12:12 user 12:13 and in a high-level language this may 12:15 look something very similar to the 12:17 following two lines of code 12:20 sum variable equals num1 plus num2 12:24 print sum to the user 12:27 so you can start to get an appreciation 12:29 here of how the high level code you 12:32 write actually ends up being fetched 12:34 decoded 12:35 and executed inside a processor 12:38 of course your processor is doing 12:40 billions and billions of these 12:42 operations a second 12:43 which when you think about it is really 12:45 very impressive 12:52 [Music] 13:03 you. make 10 questions for a standerd of a level

The LMS has been an essential tool in curriculum design and development and in organizing factors that motivate student learning, especially in online distance learning. However, an LMS can be used in blended, hybrid, and in-class delivery modes. It is a software application designed to help in the administration of courses for both students and instructors. Such systems have been designed for use in learning and teaching activities (Chung et al., 2012). They also provide a variety of interaction methods between instructors and learners to facilitate the learning process better, You must remember well-designed LMS could also help improve student skills, such as effective online learning and self-direction (Norouzi, 2014). Students could use the system to enhance performance (perceived usefulness), and they could use such systems with little effort (perceived ease of use) (Venkatesh & Davis, 2000). A majority of higher education institutions have incorporated LMS systems; they have been used in university systems by schools, faculty members, and instructors (Klobas & McGill,. 2010), Because so much of higher education has been focused on course delivery Chapter3 INSTRUCTIONAL DELIVERY SYSTEMS AND EDUCATIONAL TECHNOLOGY i 71 in a physical classroom, the implementation of an LYS has a;ded institutons in transitioning to new online universe of curriculum de!ivery (Georgou!i, & Guerre. 2NS). Repositories, central databases, and online meeting 'oations are all characteristcs of a management system. As a concept, a 'earning management system is a broad idea and an example of technology's inabifity to be specific in terms of a definition. Several requirements a generat overview of what constitutes a leaming management system, such as those listed above Finally, end-user access is also a part of a learning management system with various levels being set up by security. For example, students have read-onty access, faculty members have read and write access, and technical staff has complete access for support and administrative duties (Graf & Chien, 2009). At its core, a learning management system contains internal or Web-based support and management for numerous aspects of learning and teaching (Hiary & Abu-Shawar, 2009). This allows access from numerous locales, usually on a 24-hour basis. When looking at a university or college, this concept begins to grow greatly depending on the organization's size and scope; department, and degree program. Leaming management systems also go by other names such as course management systems, and their use goes beyond higher education institutions to include businesses and individual instructors. Meis)ar-Tal, Kurtz, and Pieterse (2012) mentioned three primary purposes of an CMS. They include the following: 1. to provide students with digital learning materials; 2. to employ interactive learning activities with students in the forums; and 3. to manage the course and the learners. Faculty members who use an LMS to make available lecture notes and other classroom resources for their face-to-face class create a web-enhanced classroom experience. Regardless of its usage, requirements for classification as a learning management system include several key concepts like the availability of assets over networks, providing hosting, administration. and support. With the requirements set, utilization becomes the focal point. A fully utilized learning management system looks at use at the student level, faculty level, and administration level. proper utilization of learning management systems should mirror traditional higher education goals, enhancing students' experiences. For learninä management systems, this creates a central hub for a class activity. For some classes, all activities work in the learning management system, while others only use its resources for select activities.

Auteur Theory is a way of looking at films that state that the director is the “author” of a film. A film is a reflection of the director’s artistic vision; so, a movie directed by a given filmmaker will have recognizable, recurring themes and visual queues that inform the audience who the director is (think a Hitchcock or Tarantino film) and shows a consistent artistic identity throughout that director’s filmography. The 3 Components of Auteur Theory Andrew Sarris, film critic for The New York Times, expanded on Truffaut’s writing and set out a more comprehensive definition for auteurs according to three main criteria: technical competence, distinguishable personality, and interior meaning. 1. Technical competence: Auteurs must be at the top of their craft in terms of technical filmmaking abilities. Auteurs always have a hand in multiple components of filmmaking and should be operating at a high level across the board. 2. Distinguishable personality: What separates auteurs from other technically gifted directors is their unmistakable personality and style. When looking at an auteur’s collected works, you can generally see shared filming techniques and consistent themes being explored. One of the primary tenets of auteur theory is that auteurs make movies that are unmistakably theirs. This is in sharp contrast with the standard studio directors of the era who were simply translating script to screen with little interrogation of the source material or editorial input. 3. Interior meaning: Auteurs make films that have layers of meaning and have more to say about the human condition. Films made by auteurs go beyond the pure entertainment-oriented spectacles produced by large studios, to instead reveal the filmmakers unique perspectives and ruminations on life. https://www.masterclass.com/articles/film-101-what-is-an-auteur#3ClNjwO6Gkgjd8ix2Cm5qI Who is the author of a TV program? It seems like it ought to be an easy question to answer, but it is not. There are, of course, scriptwriters, who are the literal authors of episodes in the sense of generating words that an actor eventually speaks, but in a soap opera or a sitcom there may be a dozen or more scriptwriters working on dialogue as the months go by. Is any one of them truly responsible for the overall tenor of the show, or are they just following rigid guidelines set down by other scriptwriters ahead of them? And the script is just the blueprint of an episode anyway. Actors, production designers, directors, videographers, editors, and on and on, are all necessary to construct an episode from that blueprint. Should we call one of them the author? And, at a more basic level, should we even bother looking for authors in television? Do viewers need to know who created a program in order to enjoy it? What does it add to our appreciation or understanding of television if we assign authorship of a program to an individual? In the closely related medium of the cinema, questions such as these have been answered by the auteur theory, which stems from the French word for “author,” auteur. Its basic precept is that a single individual is, and should be, the “author” of a work in order for it to be a good, artistically valuable work. A book, poem, film, or television show should express this individual’s personality, his “vision” (the masculine pronoun is significant; auteurist studies almost all focus on men). This notion stems from the nineteenth-century Romantic image of the author as a figure who sits alone in a dingy room, scratching out angst-ridden poems with a quill pen. The tormented, misunderstood author or artist is a cherished character type that can be traced back to the poet Lord Byron (1788–1824) and observed in numerous portrayals of demented painters, musicians, and writers in television programs and other media. Consider this: Have you ever seen or read a story about a creative person who wasn’t somehow strange or crazy? The auteur theory originated in French film criticism of the 1950s, where it was initially theorized that auteurs could be drawn from the ranks of producers, directors, scriptwriters, actors, and other filmmaking personnel.1 However, the vast bulk of auteurist film criticism has been about directors: Alfred Hitchcock, John Ford, and Quentin Tarantino, among many others.

Read the following dialogues below. Give the technical and operational meaning of the bold or highlighted word/s.

Read the text and answer the following questions 2

Related quizzes

Related quizzes