What happens to light as it passes from air into water?

It continues in a straight line

What effect does a prism have on white light?

It disperses the light into a spectrum of colors

It absorbs the light completely

When light moves from glass (n = 1.5) to air (n = 1.0), what will happen to the angle of refraction compared to the angle of incidence?

The angle of refraction will be greater than the angle of incidence

The angle of refraction will be equal to the angle of incidence

The angle of refraction will be less than the angle of incidence

What factor primarily determines how much light bends when entering a new medium?

The refractive index of the materials

What is the critical angle for total internal reflection?

The angle of incidence above which light cannot pass into the second medium.

The angle of incidence that results in the light being absorbed.

The maximum angle at which light can refract.

The angle at which light travels straight without bending.

When light travels from a medium with a higher index of refraction to one with a lower index, what happens to the light?

It bends away from the normal line.

It bends towards the normal line.

Refraction of light

Refraction of light through plane surface

REFRACTION OF LIGHT AT PLANE SURFACES

Reflection and Refraction of Light

Parts of Microscope 1. Arm It is in the back of the microscope and supports the objectives and ocular. Also, it is the part that we use to carry or lift it. 2. Base It’s the bottom of the scope. In addition, it houses the light source and the back section of base acts as a handle to carry the scope. 3. Course Focusing Knob We use it to adjust the position of objective lenses. Also, this should be done keeping in mind that the objective should not hit the slide. In addition, it should be stopped when the object is completely visible through the ocular. 4. Fine Focusing Knob We use it to bring the specimen in perfect focus once the specimen is visible through the course-focusing knob. Also, focus slowly to avoid contact between the objective and the specimen. 5. Illuminator It is the light source of the microscope. 6. Numerical Aperture or Objective lens It is found in a compound scope and is the lens that is closest to the specimen. 7. Ocular Lens This is the lens closest to the viewer in a compound light microscope. 8. Oil immersion Lens This is a 100x (100 times) objective lens. Also, this lens is small in order to attain high resolution and magnification. Furthermore, due to its size, it is important for the lens to get as much light as possible. Moreover, by immersion of lens in oil it eliminates the refraction of light, it happens because the glass and oil have almost the same refractive index. Most noteworthy, in this way the light is maximized and gives the clearest image. Besides, It oil immersion lens is used without oil then the produced Image will become unclear and has a poor resolution.

7.2.1 Critical Angle 1. The critical angle is the angle of incidence at which the refracted ray: A. Bends toward the normal B. Bends away from the normal C. Travels along the boundary D. Is totally reflected Answer: C 7.2.2 Snell’s Law & Critical Angle 2. Which formula correctly represents the critical angle c when light travels from medium 1 to medium 2? A. n1cos⁡c=n2 B. n2sin⁡c=n1 C. n1sin⁡c=n2 D. n1sin⁡c=n2sin⁡90∘ Answer: D 7.2.3 Total Internal Reflection 3. Total internal reflection occurs only when: A. Light travels from air to glass B. Angle of incidence is less than the critical angle C. Light travels from a denser to a rarer medium D. Refractive index of the second medium is greater Answer: C 4. Which condition is not required for total internal reflection? A. Light must travel from a denser medium B. Angle of incidence must exceed the critical angle C. Refractive index of second medium must be lower D. Light must strike at 90° Answer: D 7.2.4 Ray Diagrams & Angle Calculations 5. A ray in water (n = 1.33) hits the surface at 40°. Critical angle = 48.8°. What happens? A. Refraction only B. Total internal reflection C. No refraction D. Light stops Answer: A 7.2.5 Snell’s Law in Glass Blocks & Prisms 6. A ray enters glass (n = 1.5) from air at 30°. Which statement is correct? A. It bends away from the normal B. It bends toward the normal C. It travels straight D. It undergoes total internal reflection Answer: B 7. In a prism, the deviation of light occurs mainly because: A. Light slows down in glass B. Light speeds up in glass C. Light reflects internally D. Light cannot pass through glass Answer: A 7.2.6 Mirages 8. A mirage appears on a hot road because: A. Light reflects off the sky B. Light refracts through layers of air with different densities C. Light undergoes dispersion D. Light travels in straight lines only Answer: B 7.2.7 Dispersion Through a Prism 9. Dispersion occurs because: A. All colors refract equally B. Different wavelengths refract differently C. The prism reflects light D. White light cannot be refracted Answer: B 7.2.8 Rainbow Formation 10. A rainbow is formed due to: A. Refraction only B. Total internal reflection only C. Dispersion only D. Refraction + TIR + dispersion Answer: D 7.2.9 Optical Fibers 11. Optical fibers work mainly due to: A. Refraction B. Diffraction C. Total internal reflection D. Dispersion Answer: C 12. Which is an advantage of optical fibers? A. High signal loss B. Immune to electromagnetic interference C. Very heavy D. Slow data transmission Answer: B

Reflection of light

Reflection of light (including specular and diffuse)

110.31.b.17.C

Related quizzes

Related quizzes