Risk Response | Quizalize

AAP-Risk and Fraud: Assessment and Response and Audit Evidence

Mitigation and Adaptation. The Philippines is situated in a disaster risk area where hazards will always be present. The government's response to mitigate and adapt to these hazards is through the creation of hazard maps. Hazard maps are developed to indicate the places where most natural hazards occur or will most likely occur. Identifying these places can aid in informed land-use and the persons-in-charge can create emergency response plans. With the proper knowledge of hazards and the actions to be taken if ever they occur will help in the reduction and mitigation of the dangers of these natural hazards to life and property. In the Philippines, the Department of Environment and Natural Resources (DENR) created a Geohazard Mapping and Assessment Program implemented by the Mines and Geosciences Bureau, which identifies areas vulnerable to geologic hazards or geohazard. They are also responsible for developing the hazard maps. High susceptibility to landslide. • Areas with high susceptibility rating have active/recent landslides and tension cracks that would directly affect the community. Those with steep slopes and drainages that are prone to landslide damming are also highly susceptible to landslides. Moderate susceptibility to landslide. • Areas with moderate landslide susceptibility rating have inactive/old landslide and tension cracks which are located away from the community. These areas usually have moderate slopes. Low susceptibility to landslide . • Areas with low to gentle slopes and lacking tension cracks have low landslide susceptibility rating. High susceptibility to flooding . • Areas with greater than 1-meter flood height. These areas are usually flooded for several hours during heavy rains include landforms of topographic lows such as active river channels, abandoned river channels and areas along river banks; also prone to flashfloods. Low to moderate susceptibility to flooding. • Areas with less than 10-meter flood height. These are usually inundated during prolonged and extensive heavy rainfall or extreme condition. Aside from the development of hazard maps, action plans should be conceptualized to identify the priorities for action and plan for the possible impacts affecting the country. Local programs should be established to help the people who are most affected by natural disasters to recover from their losses. Such programs can include training the people to innovate and think out of the box to come up with ideas or solutions that will be more effective for their livelihood. Education is also a means for people to mitigate and adapt to natural hazards. It can increase mass awareness regarding natural hazards; thus, increasing their chances of survival. It is also a means of promoting access to information and resources that will help individuals be better prepared for natural hazards. Lastly, formal education can empower individuals to be more adaptive with their responses to and recovery from natural hazards. In preparation for natural hazards, information regarding what to do before during, and after a natural hazard is disseminated all over the country. The following are the things to do to be prepared for each natural hazard..

Measuring the Effectiveness of police strategies and operations Clearance rates Def: The proportion of incidents known to the police that result in teh identification of a suspect Crime Displacement Def: relocation-due to the effective crime prevention, crime response initiates criminal activity from one local to another Professional Model of Policing Model of police work, reactive, incident driven and centred on random patrol Three Rs: random patrol, rapid response and reactive investigation Community policing Def: policing centred on police-community partnership and problem-solving The three ps: prevention, problem solving and partnership with the proactive role Community-based strategic policing Def: The model incorporates community policing with prevention, crime response and crime attack approaches Community engagement, police services strategic in their policies and operations Crime Analytics Sophisticated programs, and crime maps, provide intelligence to police officers in patrol and investigative units Intelligence-led policing: guided by collection, and analysis of information informs police decision-making Compstat: Increase effectiveness, and efficiency of police service while holding police personnel accountable for crime reduction Predictive policing: statistical analysis, identify time and location likely to occur Limited analytical capacity and not able to provide their officers with real-time information Biased policing certain areas, or persons, being identified as important for police attention in predictive policing How Predictive Policing Software Works The Police and the community Public Attitudes toward and Confidence in the police Community-based strategic policing: Recruitment, and deployment of volunteers in community police stations, storefronts Foot and bike patrols Team policing Restorative Justice Approaches Alternative for addressing, and resolving crime, needs of victims, offenders and the community Victim offender meditation Circle sentencing Community holistic healing programss Family group conferences Crime Prevention and Response Strategies Crime Prevention progemas Aimed at reducing crime, generating community involvement and heightening citizens; perceptions of safety Primary crime prevention programs opportunities for criminal offences and alter those conditions Secondary crime prevention programs focus on areas that produce crime and disorder Tertiary crime prevention programs are designed to prevent youth and adults from reoffending The Broken Windows Approach If minor crimes are left unaddressed in an environment, more serious crimes will emerge (originated in New York City in the 1980’s) “The exictsnce of unchecked and uncontrolled mirror incivilites in a neighbourhood- for example, panhandling, public drunkenness, vandalism and graffiti-produces an atmosphere conducive to more serious crime.” R.H. Burke Zero tolerance policing Zero tolerance policing: Strict order maintenance approach- specific area, coupled with high police visibility and presence Quality of life policing: Increased police visibility improves conditions in an area by targeting disruptive and annoying behaviour Problem Oritented policing (POP) Strategy, the idea that police should address teh cause of recurrent crime and disorder Root causes of recurring problems Solutions to problems Collabortaion with community SARA (scanning, analysis, response and assessment) problem-solving model helps officers identify, and respond to problems with the assistance of agencies, organizations, community groups The Police and Vulnerable/ At risk groups Persons with Mental Illness Patrol officers encountering more and more persons with mental illness (PwMi) Number of these end trragically Number of incidents increased significantly following deinstitutionalization of the mentally ill - in 1960 and 1970 De facto (in fact) mental health workers, first responders Crisis intervention training (CIT) Assertive outreach teams Assertive community treatment (ACT) teams Indigenouse, Vulnerable, and Marginalized women Sexual assault one of most underreported crimed. 1 in 20 incidents report to police. Many Women Do not want to deal with police Believe police would not take allegation seriously Language, cultural barriers Distrust the police Fear repercussions Missing and Murdered Indigenous women Canada, unknown number of missing and murdered indigenous women 2016, federal government announced National inquiry into Missing and Murdered Indigennouse women and girls Three goals of MMIWG 1. Finding the truth 2. Honouring the truth 3. Giving life to the truth as a path of healing

Introduction to Hedging Instruments: Forwards, Futures, Options, and Swaps Hedging instruments are financial tools used by businesses and investors to mitigate risk. These instruments help protect against adverse price movements in assets such as commodities, currencies, interest rates, or securities. The four main hedging instruments are forwards, futures, options, and swaps. 1. Forwards A forward contract is a customised agreement between two parties to buy or sell an asset at a predetermined price on a specified future date. Key Characteristics: Over-the-counter (OTC): Traded directly between parties, not on an exchange. Customisation: Can be tailored to suit the needs of the parties involved. Settlement: Occurs at the end of the contract, which may involve physical delivery or cash settlement. Risk: Forwards carry counter-party risk, as there is a possibility one party may default. Example: A company that needs to import raw materials in six months may enter into a forward contract to lock in the current price, avoiding the risk of price increases. 2. Futures A futures contract is similar to a forward, but it is standardised and traded on an exchange. This standardisation eliminates counter-party risk. Key Characteristics: Standardised: Contract size, expiration, and other terms are fixed by the exchange. Mark-to-market: Gains and losses are settled daily. Liquidity: Futures are highly liquid because they are traded on exchanges. Regulation: As they are traded on formal exchanges, they are more regulated than forwards. Example: A wheat farmer may sell futures contracts to hedge against a possible decline in wheat prices before harvest. 3. Options Options provide the right, but not the obligation, to buy or sell an asset at a specified price on or before a certain date. There are two types of options: call options and put options. Call Option: Gives the holder the right to buy an asset at a predetermined price. Put Option: Gives the holder the right to sell an asset at a predetermined price. Key Characteristics: Premium: The buyer pays a premium upfront to obtain the option. Limited Risk: The maximum loss is limited to the premium paid. Flexibility: Options can be used for speculative or hedging purposes. Example: An investor holding stocks may buy a put option to protect against potential declines in the stock's price. 4. Swaps A swap is a contract in which two parties agree to exchange cash flows or liabilities over a specific period. The most common types are interest rate swaps and currency swaps. Key Characteristics: Customizable: Like forwards, swaps are often tailored to meet the needs of the parties involved. Counterparty Risk: Swaps are typically OTC instruments, exposing parties to default risk. Common Uses: Used to manage interest rate risk or currency risk. Example: A company with a variablerate loan may enter into an interest rate swap to exchange its variable payments for fixedrate payments, thus locking in stable costs. Hedging instruments are essential for managing financial risk in volatile markets. Each instrument serves different purposes, with varying levels of complexity, risk, and customization. Whether through forwards, futures, options, or swaps, businesses can better plan for the future by reducing exposure to uncertain price fluctuations. Hedging Strategies for Market Risk, Credit Risk, and Currency Risk 1. Hedging Strategies for Market Risk Market risk (also known as systematic risk) arises from fluctuations in asset prices, such as stocks, bonds, commodities, and interest rates, due to economic factors or market volatility. Key Hedging Instruments for Market Risk: Derivatives (Options, Futures, and Forwards): These instruments allow investors to hedge against unfavorable price movements in stocks, commodities, or interest rates. Example: An investor holding a large stock portfolio might buy a put option to protect against a potential market downturn. If the market declines, the put option increases in value, offsetting losses in the portfolio. Short Selling: Investors can sell borrowed assets with the expectation of buying them back at a lower price, profiting from the decline. Example: A fund manager expecting a market decline may short sell stocks to hedge a portfolio against losses. Common Hedging Strategies: Portfolio Diversification: Reducing market risk by spreading investments across various asset classes (stocks, bonds, commodities) and sectors. Using Index Futures: Large portfolios can be hedged using index futures that track the performance of the overall market. If the market declines, profits from the short position in the futures contract will offset losses in the portfolio. Risk Parity: Allocating assets based on the level of risk rather than the dollar amount invested, balancing risk exposure across asset classes. 2. Hedging Strategies for Credit Risk Credit risk refers to the possibility that a borrower will default on a debt obligation. This is especially important for banks, lenders, and institutions dealing with bonds and loans. Key Hedging Instruments for Credit Risk: Credit Default Swaps (CDS): A financial derivative where the buyer of a CDS pays a premium to the seller in exchange for protection against a default on a loan or bond. Example: A bank holding corporate bonds can buy a CDS to ensure they are compensated if the issuing company defaults. Collateralised Debt Obligations (CDOs): These instruments pool together various debt instruments and allow risk to be distributed among multiple investors. Credit Insurance: Companies may use insurance to protect against the risk of a customer defaulting on payments. Common Hedging Strategies: Diversification of Loan Portfolio: Spreading out credit exposures across various industries, geographies, and borrower profiles reduces the overall risk of default. Tightening Lending Standards: Limiting exposure to highrisk borrowers by implementing stringent credit assessments. AssetBacked Securities: Banks can sell loans or bonds packaged as assetbacked securities to reduce their exposure to credit risk. 3. Hedging Strategies for Currency Risk Currency risk (or exchange rate risk) arises from fluctuations in foreign exchange rates, which can affect companies involved in international trade or with investments in foreign countries. Key Hedging Instruments for Currency Risk: Forward Contracts: A firm agrees to exchange a specified amount of currency at a predetermined exchange rate on a future date. Example: A U.S. exporter expecting payment in euros might enter into a forward contract to sell euros and lock in a favorable exchange rate. Currency Options: These give the right, but not the obligation, to buy or sell currency at a specific price. Example: A U.S.based company buying goods from Japan might buy a call option on the yen to hedge against the risk of yen appreciation. Currency Swaps: Two parties exchange interest payments and principal in different currencies to hedge against exchange rate fluctuations. Common Hedging Strategies: Natural Hedging: Companies can offset currency risk by balancing foreign revenue with costs in the same currency. For example, if a company generates revenue in euros, it can also incur expenses in euros, reducing exposure to exchange rate fluctuations. Multi-Currency Invoicing: Firms can invoice in their home currency, shifting the currency risk to the buyer. Currency Diversification: Holding a diversified basket of currencies can reduce exposure to large fluctuations in any one currency. Effective hedging strategies are crucial for managing various types of risks in financial markets. Market risk can be managed using instruments like futures and options, while credit risk can be mitigated through diversification and credit derivatives. Currency risk, often faced by multinational firms, can be hedged using forward contracts, options, or swaps. Each strategy helps firms and investors protect their portfolios, ensure financial stability, and reduce the impact of adverse movements in the financial markets. Portfolio Risk Management Techniques: Diversification, Asset Allocation, and Risk Budgeting Managing risk is a fundamental aspect of portfolio management. Investors use various techniques to control and reduce the risks inherent in investing. Three key techniques used in portfolio risk management are diversification, asset allocation, and risk budgeting. Each of these techniques helps in mitigating potential losses while aiming to achieve the desired return. 1. Diversification Diversification is a risk management strategy that involves spreading investments across different assets, sectors, or geographic regions to reduce exposure to any single risk. The idea is that different assets perform differently under various market conditions, so losses in one investment can be offset by gains in others. Key Benefits of Diversification: Reduction of Unsystematic Risk: Unsystematic risk, which is unique to a specific company or industry, can be reduced by holding a variety of investments that respond differently to market conditions. Improved Stability: A diversified portfolio is less volatile, as the negative performance of one asset can be balanced by the positive performance of others. Methods of Diversification: Across Asset Classes: Investing in a mix of asset classes such as stocks, bonds, commodities, and real estate. Example: A portfolio with 60% equities, 30% bonds, and 10% commodities is more diversified than one solely consisting of stocks. Within Asset Classes: Diversifying within a single asset class (e.g., holding stocks from different sectors like technology, healthcare, and energy). Geographic Diversification: Investing in assets across various countries or regions to mitigate country-specific risks. Example: Holding U.S. stocks along with emerging market equities can reduce risks related to a downturn in one country's economy. 2. Asset Allocation Asset allocation refers to the process of dividing investments among different asset classes (such as stocks, bonds, and cash) to align with an investor's risk tolerance, time horizon, and financial goals. Asset allocation plays a crucial role in portfolio risk management by determining the overall risk-return profile of the portfolio. Key Elements of Asset Allocation: Strategic Asset Allocation: A longterm approach that involves setting target allocations for different asset classes based on financial goals and risk tolerance. Example: A young investor with a longterm horizon might allocate 70% to stocks, 20% to bonds, and 10% to cash. Tactical Asset Allocation: A more active approach that involves adjusting the asset mix in response to short-term market conditions. Example: If the investor expects an economic downturn, they might temporarily reduce exposure to equities and increase exposure to bonds. Types of Asset Allocation Models: Conservative: Focuses on preserving capital with a larger allocation to bonds and cash (e.g., 20% stocks, 80% bonds). Balanced: A moderate risk approach with an equal focus on growth and income (e.g., 50% stocks, 50% bonds). Aggressive: Targets higher returns by investing predominantly in equities, accepting higher risk (e.g., 80% stocks, 20% bonds). Example of Asset Allocation: A 40 year old investor with moderate risk tolerance may allocate their portfolio as follows: 50% equities, 40% bonds, and 10% in alternative investments such as real estate or commodities. The equities provide growth potential, while the bonds and alternative assets offer stability and income. 3. Risk Budgeting Risk budgeting is a method of allocating risk across different components of a portfolio, rather than focusing solely on returns. The goal is to optimise the portfolio’s risk-return profile by distributing risk in a way that aligns with the investor’s objectives and risk tolerance. Key Concepts of Risk Budgeting: Risk Contribution: Each asset class or investment in the portfolio contributes a certain amount of risk (measured by metrics such as volatility or Value at Risk). Risk budgeting ensures that no single asset class dominates the overall risk of the portfolio. Example: A portfolio may contain 60% stocks and 40% bonds, but if the stocks are highly volatile, they may contribute 90% of the portfolio's risk. Target Risk: Investors set a maximum acceptable level of risk (e.g., a portfolio volatility of 10%) and allocate investments so that the total risk remains within this target. Techniques in Risk Budgeting: Risk Parity: Allocates risk evenly across asset classes, rather than allocating capital based solely on return expectations. Example: In a risk-parity portfolio, both bonds and stocks might be balanced in such a way that they contribute equally to the overall portfolio risk, even though the dollar investment in bonds may be larger due to their lower volatility. Value at Risk (VaR): This technique measures the potential loss in a portfolio over a specific time period, under normal market conditions, at a given confidence level. The risk budget ensures that the potential loss stays within acceptable limits. Example of Risk Budgeting: An investor targets an overall portfolio risk of 8% volatility. After analyzing the risk contribution of each asset class, they determine that equities, which currently make up 60% of the portfolio, contribute 70% of the risk. To adhere to the risk budget, the investor may reduce their equity exposure and increase their allocation to bonds or other less volatile assets. Diversification, asset allocation, and risk budgeting are complementary techniques used in portfolio risk management. Diversification reduces unsystematic risk by spreading investments across various assets. Asset allocation ensures that investments align with an investor's goals and risk tolerance. Risk budgeting focuses on managing the contribution of risk from each asset class to create a balanced and efficient portfolio. Together, these strategies help investors achieve a balance between risk and return, ensuring longterm portfolio stability. Risk Mitigation Through Insurance, Securitisation, and Other Financial Engineering Techniques Risk mitigation is a core objective in financial management, and various strategies can be employed to reduce or manage risks. Three major approaches are insurance, securitisation, and financial engineering techniques. Each of these methods helps firms and individuals transfer, reduce, or eliminate certain financial risks. 1. Insurance as a Risk Mitigation Tool Insurance is a traditional risk transfer method that protects against financial losses by shifting the risk to an insurance company in exchange for premium payments. It is widely used to mitigate various forms of risk, such as operational, liability, and property risks. Key Aspects of Insurance for Risk Mitigation: Risk Transfer: The insurer takes on the risk in exchange for a premium, thus protecting the insured party from unexpected financial losses. Indemnity: In the event of a loss, the insurance policy compensates the insured based on the terms of the contract. Customisable Coverage: Insurance policies can be tailored to address specific risks, such as property damage, business interruption, liability, or cyber risks. Types of Insurance for Businesses: Property and Casualty Insurance: Covers physical assets like buildings, machinery, and inventory from risks like fire, theft, or natural disasters. Liability Insurance: Protects businesses against legal liabilities arising from accidents, negligence, or professional errors. Business Interruption Insurance: Compensates for lost income if a business has to halt operations due to unforeseen events. Credit Insurance: Shields companies from losses due to the nonpayment of trade receivables. 2. Securitisation as a Risk Mitigation Technique Securitisation is a financial engineering process that involves pooling various financial assets (such as loans, mortgages, or receivables) and converting them into marketable securities. This process allows firms to transfer risk to investors, thereby reducing their exposure. Key Elements of Securitisation: Risk Transfer: By securitising assets, companies can transfer the risk of default or nonpayment to investors who purchase the securities. Liquidity Creation: Securitisation converts illiquid assets (like mortgages or loans) into liquid, tradeable securities, improving cash flow for the originating firm. Diversification of Risk: Pooling assets with different risk profiles reduces the impact of individual defaults, spreading the risk across multiple investors. Common Forms of Securitisation: MortgageBacked Securities (MBS): Pools of mortgages are bundled and sold as securities to investors, transferring the risk of mortgage defaults. Example: A bank that issues home loans can bundle those loans into MBS and sell them to investors, transferring the credit risk of potential defaults. Asset-Backed Securities (ABS): Similar to MBS, but backed by other types of assets like credit card receivables, auto loans, or student loans. Collateralised Debt Obligations (CDOs): Structured financial products that pool different types of debt, such as loans and bonds, and sell them as securities with varying risk levels. Example: A bank may issue a portfolio of auto loans and then pool these loans into an assetbacked security (ABS). The ABS is sold to investors, who take on the risk of loan defaults. By securitising the loans, the bank reduces its exposure to credit risk and generates immediate cash flow. 3. Financial Engineering Techniques for Risk Mitigation Financial engineering involves the use of complex financial instruments, derivatives, and structured products to manage or mitigate financial risks. These techniques allow firms to hedge against specific risks, optimize capital structure, and improve financial stability. Common Financial Engineering Techniques: Derivatives: Financial instruments like futures, forwards, options, and swaps are used to hedge against price fluctuations, interest rate changes, or currency movements. Example: A company with significant foreign exchange exposure may use currency forwards or options to hedge against exchange rate fluctuations, ensuring predictable cash flows. Options and Futures: Options: Provides the right (but not the obligation) to buy or sell an asset at a predetermined price, allowing firms to hedge against unfavorable price movements. Example: An airline company can buy options on jet fuel to hedge against rising fuel prices. Futures: Standardized contracts to buy or sell an asset at a set price on a future date, commonly used to hedge commodities or financial assets. Example: A wheat producer may use futures contracts to lock in a favorable price for its crop, hedging against a potential price drop. Swaps: These involve the exchange of cash flows between two parties, often used to manage interest rate risk or currency risk. Interest Rate Swaps: Firms can exchange floatingrate interest payments for fixedrate payments to hedge against rising interest rates. Currency Swaps: Used to hedge exchange rate risk in crossborder transactions by exchanging principal and interest payments in different currencies. Example: A company with a variablerate loan may enter into an interest rate swap to exchange its variable payments for fixedrate payments, locking in stable costs. Structured Products: These are customised financial instruments designed to achieve specific riskreturn objectives. They often combine derivatives with other securities to create tailored risk exposures. Example: A structured note that combines a bond with an embedded option, offering downside protection while allowing for potential upside linked to the performance of an equity index. Credit Derivatives: Tools like credit default swaps (CDS) allow investors to transfer credit risk to other parties. Example: A bondholder worried about a company’s potential default may purchase a CDS, which pays out in case of a default event. Example: A company may issue a bond with an embedded call option, allowing it to repurchase the bond if interest rates decline. This financial engineering tool enables the company to mitigate the risk of rising interest rates, reducing future borrowing costs. Risk mitigation through insurance, securitisation, and financial engineering offers businesses a variety of tools to manage and transfer risks. Insurance allows for the direct transfer of risk to an insurer, while securitisation helps companies offload risk by packaging and selling assets as securities. Financial engineering techniques, including derivatives, swaps, and structured products, provide sophisticated ways to hedge market, interest rate, and currency risks. Each approach helps organizations improve financial stability, enhance liquidity, and manage potential losses in a volatile market environment.

What is a crime A crime is generally defined as an act or omission that is prohibited by criminal law Two critical ingredients of a crime are: 1) the commission of an act (Actus reus) 2) the mental intent to commit the act (Mens rea) A crime occurs when a person Commits an act or fails to commit an act when under a legal responsibility to do so Has the intent or mens rea to commit the act Does not have a legal defence or justification for committing the act and Violates a provision in criminal law The Social construction of crime Important to distinguish between behaviours that may be considered deviant by society and crimes Deviance is behaviour that is contrary to the norms and values of the larger society Crime is behaviour that breaks the law Deviance includes: Criminal behaviour and Wide range of other behaviours not against the law: May be frowned upon by the larger society What is viewed as deviant changes over time Crime includes: Social construction of crime Legal status of behaviours is not determined by behaviour itself but result of social response to the behaviour/persons/groups engaged in it Criminologists often conduct historical analyses to understand how social, economic and political environments may influence legislation Moral entrepreneurs Often play a key role in criminalizing certain activities Individuals, groups or organizations, seek action against certain groups of people/behaviours and bring pressure on legislators to enact criminal statutes The Origins and Application of the Criminal Law Differing perspectives on where criminal laws come from/ applied via the criminal justice system are reflected in two models 1) Value consensus model 2) Conflict Model Value consensus model Behaviours are defined as criminal/punishment imposed, reflect opinions/limits of tolerance Application of law, society reaffirms acceptable behaviours/social cohesion Conflict Model Crime and punishment reflect the power some groups have to influence, formulation/application of criminal law rich/privileged have an advantage in influencing law reform/criminal justice system The Canadian Legal System Is a common law system, with exception of Quebec which has a civil law system (Based on the French Code Napoleon) Common law is law based on custom, tradition, practice and generally unwritten Precedent is a judicial decision may be use as a standard in subsequent similar cases Canadian Courts Canadian courts organised in a hierarchy Supreme court of Canada is the highest court Stare decisis- principle whereby higher courts set precedents that lower courts must follow “To stand by what was decided” Like cases should be treated alike All courts below SSC bound to apply that same ruling in subsequent cases Criminal Law Body of law deals with conduct considered so harmful to society as a whole that it is prohibited by statute and prosecuted and punished by the government Functions of the Criminal Law In Canadian society, Criminal law provides the following functions Acts as a mechanism of social control Defines the parameters of acceptable behaviour Reduces the risk of personal retaliation Assists in general and specific deterrence Prosecutes criminalized behaviour Protects groups interests Principles of Canadian Law The Rule of Law The requirement that governments as well as individuals be subjected to Traced back to the English Magna Carta The essence of the rule of law is that No one person is above the law All persons are bound by the law All are entitled to protection by the law The law should be observed and enforced equally There is a standard to which criminal justice officials must adhere and will be held accountable Criminal Law Vs. Civil (Tort) Law Summary Crime is a social construction and is a reflection of changing time and mores Criminal law is not static and what behaviour legislatively defined as criminal can change overnight There are instances in which controversy arises when the criminal law is applied to issues of ethics, morality and religion The criminal law was identified as one type of public law and the functions of the criminal law were set out The rule of law and the charter of rights and freedoms are two key parts of the foundation of the criminal justice system There are several principles that also provide the foundation for Canadian law The role, principles origins and application of the criminal law were examined and a number of case studies were presented to illustrate the dynamic nature of the criminal law in a diverse society

When to use thematic analysis? Thematic analysis is a good approach to research where you’re trying to find out something about people’s views, opinions, knowledge, experiences or values from a set of qualitative data – for example, interview transcripts, social media profiles, or survey responses. Some types of research questions you might use thematic analysis to answer: • How do patients perceive doctors in a hospital setting? • What are young women’s experiences on dating sites? • What are non- experts’ ideas and opinions about climate change? • How is gender constructed in high school history teaching? To answer any of these questions, you would collect data from a group of relevant participants and then analyze it. Thematic analysis allows you a lot of flexibility in interpreting the data, and allows you to approach large data sets more easily by sorting them into broad themes. However, it also involves the risk of missing nuances in the data. Thematic analysis is often quite subjective and relies on the researcher’s judgement, so you have to reflect carefully on your own choices and interpretations. Pay close attention to the data to ensure that you’re not picking up on things that are not there – or obscuring things that are.

Good day this is Chris today we will be doing a quick walkthrough on ISO 14001 2015 Environmental Management System and its main clauses let's get started ISO 14001 2015 Environmental Management System is a globally recognized standard for environment Management systems or EMS an EMS is a framework that organizations use to manage their environmental impact comply with regulations and improve their environmental performance the standard outlines are requirements for an EMS including the development of an environmental policy the identification of environmental aspects and impacts the establishment of objectives and targets the implementation of operational control monitoring and measurement systems and the ongoing review and Improvement of the system ISO 14001 is a flexible standard that can be used by organizations of any size or type regardless of their environment impact or level of environment performance it provides a practical framework for organizations to manage their environmental impact reduce environment risks and demonstrate their commitment on sustainability to their stakeholders here is the standard that provides a structured approach to develop an EMS which includes several key steps one organizations must develop an environmental policy that outlines their commitment to environmental sustainability this policy should be communicated to all employees and stakeholders two organizations must identify their environmental aspects and impacts this involves identifying the activities products and services that have an impact on the environment as well as the potential environmental consequences of those impacts three once the environmental aspects and the impacts have been identified organizations must establish environmental objectives and targets these objectives and targets should be specific measurable achievable relevant and time-bound 4. after setting objectives and targets organizations must Implement operational controls and establish monitoring and measurement systems to ensure that they are meeting their objectives and targets finally organizations must review and continually improve their EMS this involves conducting regular audits reviewing the EMS to ensure that it remains relevant and effective and making any necessary changes or improvements the main Clause of iso 14001 2015 apart from its scope normative references and terms and conditions that the main Clauses of iso 14001 2015 can be listed as context of the organization leadership planning support operation performance evaluation and Improvement Clause 4.0 context of the organization is about understanding the organization and its context understanding the needs and expectations of the interested parties determining the scope of the Environmental Management System EMS and Environmental Management System itself Clause 5.0 talks about leadership and commitment Environmental Policy organizational roles responsibility and authorities Clause 6.0 planning focuses on actions to address risk and opportunities as well as environmental objectives and planning to achieve them Clause 7.0 support are detailed requirements on resources competence awareness communication that includes external and internal communication documented information that involves creating updating in control of documented information Clause 8.0 operation talks about operational planning and control as well as emergency preparedness and response overall the design of iso 14001 2015 provides guidelines to form a system that is structured to cater the requirements of stakeholder needs and expectations to drive life cycle perspective and Energy Efficiency as pictured here Clause 9.0 performance evaluation provides guidelines to monitoring measurement analysis and evaluation evaluation compliance and management review an additional note here is that ISO 19011 2018 guidelines for auditing Management Systems which is an audit process that will determine the scope to establish the audit criteria by collecting evidence evaluating the evidence and then draw a conclusion based on the findings as pictured here [Music] finally Clause 10.0 Improvement talks about how Improvement is an integral factor to an effective Environmental Management system through General non-conformity and corrective action and continual Improvement talking about Improvement it is always continual in putting efforts towards the betterment of the existing system here is a snapshot of the main Clauses of iso 14001 2015 [Music] I hope you find this video useful we are industry experts specialized in management system consultancy and Industry relevant corporate training give us a call and let us help you drive your business excellence and upskill your employees to elevate workplace efficiency [Music] CREATE 10 MCQ AND 2 SAQ QUESTIONS BASED ON THE ABOVE PARAGRAPH

Related quizzes

Related quizzes