Shaping of earth | Quizalize

Early society and accomplishments Origins Knowledge of the early prehistory of Southeast Asia has undergone exceptionally rapid change as a result of archaeological discoveries made since the 1960s, although the interpretation of these findings has remained the subject of extensive debate. Nevertheless, it seems clear that the region has been inhabited from the earliest times. Hominid fossil remains date from approximately 1,500,000 years ago and those of Homo sapiens from approximately 40,000 years ago. Furthermore, until about 7000 bce the seas were some 150 feet (50 metres) lower than they are now, and the area west of Makassar Strait consisted of a web of watered plains that sometimes is called Sundaland. These land connections perhaps account for the coherence of early human development observed in the Hoabinhian culture, which lasted from about 13,000 to 5000 or 4000 bce. The stone tools used by hunting and gathering societies across Southeast Asia during this period show a remarkable degree of similarity in design and development. When the sea level rose to approximately its present level about 6000 bce, conditions were created for a more variegated environment and, therefore, for more extensive differentiation in human development. While migration from outside the region may have taken place, it did not do so in a massive or clearly punctuated fashion; local evolutionary processes and the circulation of peoples were far more powerful forces in shaping the region’s cultural landscape. Technological developments and population expansion Perhaps because of a particular combination of geophysical and climatic factors, early Southeast Asia did not develop uniformly in the direction of increasingly complex societies. Not only have significant hunting and gathering populations continued to exist into the 21st century, but the familiar cultural sequences triggered by such events as the discovery of agriculture or metallurgy do not seem to apply. This is not to say that the technological capabilities of early Southeast Asian peoples were negligible, for sophisticated metalworking (bronze) and agriculture (rice) were being practiced by the end of the 3rd millennium bce in northeastern Thailand and northern Vietnam, and sailing vessels of advanced design and sophisticated navigational skills were spread over a wider area by the same time or earlier. Significantly, these technologies do not appear to have been borrowed from elsewhere but were indigenous and distinctive in character. Austronesian languages Austronesian languagesMajor divisions of the Austronesian languages. These technological changes may partially account for two crucial developments in Southeast Asia’s later prehistory. The first is the extraordinary seaborne expansion of speakers of Proto-Austronesian languages and their descendants, speakers of Austronesian (or Malayo-Polynesian) languages, which occurred over a period of 5,000 years or more and came to encompass a vast area and to stretch nearly half the circumference of Earth at the Equator. This outward movement of people and culture was evolutionary rather than revolutionary, the result of societal preference for small groups and a tendency of groups to hive off once a certain population size had been reached. It began as early as 4000 bce, when Taiwan was populated from the Asian mainland, and subsequently it continued southward through the northern Philippines (3rd millennium bce), central Indonesia (2nd millennium bce), and western and eastern Indonesia (2nd and 1st millennia bce). From approximately 1000 bce on the expansion continued both eastward into the Pacific, where that immense region was populated in a process continuing to about 1000 ce as voyagers reached the Hawaiian Islands and New Zealand, and westward, where Malay peoples reached and settled the island of Madagascar sometime between 500 and 700 ce, bringing with them (among other things) bananas, which are native to Southeast Asia. Thus, for a considerable period of time, the Southeast Asian region contributed to world cultural history, rather than merely accepting outside influences, as frequently has been suggested. The second development, which began possibly as early as 1000 bce, centred on the production of fine bronze and the fashioning of bronze-and-iron objects, particularly as they have been found at the site in northern Vietnam known as Dong Son. The earliest objects consisted of socketed plowshares and axes, shaft-hole sickles, spearheads, and such small items as fishhooks and personal ornaments. By about 500 bce the Dong Son culture had begun producing the bronze drums for which it is known. The drums are large objects (some weigh more than 150 pounds [70 kg]), and they were produced by the difficult lost-wax casting process and decorated with fine geometric shapes and depictions of animals and humans. This metal industry was not derived from similar industries in China or India. Rather, the Dong Son period offers one of the most powerful—though not necessarily the only or earliest—examples of Southeast Asian societies transforming themselves into more densely populated, hierarchical, and centralized communities. Since typical drums, either originals or local renditions, have been found throughout Southeast Asia and since they are associated with a rich trade in exotics and other goods, the Dong Son culture also suggests that the region as a whole consisted not of isolated, primitive niches of human settlement but of a variety of societies and cultures tied together by broad and long-extant trading patterns. Although none of these societies possessed writing, some displayed considerable sophistication and technological skill, and, although none appears to have constituted a territorial centralized state, new and more complex polities were forming.

Lesson 2: Plate Tectonics There are a few handfuls of major plates and dozens of smaller, or minor, plates. Six of the majors are named for the continents embedded within them, such as the North American, African, and Antarctic plates. Though smaller in size, the minors are no less important when it comes to shaping the Earth. The tiny Juan de Fuca plate is largely responsible for the volcanoes that dot the Pacific Northwest of the United States. The plates make up Earth's outer shell, called the lithosphere. (This includes the crust and uppermost part of the mantle.) Churning currents in the molten rocks below propel them along like a jumble of conveyor belts in disrepair. Most geologic activity stems from the interplay where the plates meet or divide. The movement of the plates creates three types of tectonic boundaries: convergent, where plates move into one another; divergent, where plates move apart; and transform, where plates move sideways in relation to each other. They move at a rate of one to two inches (three to five centimeters) per year. Convergent BoundariesWhere plates serving landmasses collide, the crust crumples and buckles into mountain ranges. India and Asia crashed about 55 million years ago, slowly giving rise to the Himalaya, the highest mountain system on Earth. As the mash-up continues, the mountains get higher. Mount Everest, the highest point on Earth, may be a tiny bit taller tomorrow than it is today. These convergent boundaries also occur where a plate of ocean dives, in a process called subduction, under a landmass. As the overlying plate lifts up, it also forms mountain ranges. In addition, the diving plate melts and is often spewed out in volcanic eruptions such as those that formed some of the mountains in the Andes of South America. At ocean-ocean convergences, one plate usually dives beneath the other, forming deep trenches like the Mariana Trench in the North Pacific Ocean, the deepest point on Earth. These types of collisions can also lead to underwater volcanoes that eventually build up into island arcs like Japan. Divergent Boundaries At divergent boundaries in the oceans, magma from deep in the Earth's mantle rises toward the surface and pushes apart two or more plates. Mountains and volcanoes rise along the seam. The process renews the ocean floor and widens the giant basins. A single mid-ocean ridge system connects the world's oceans, making the ridge the longest mountain range in the world. On land, giant troughs such as the Great Rift Valley in Africa form where plates are tugged apart. If the plates there continue to diverge, millions of years from now eastern Africa will split from the continent to form a new landmass. A mid-ocean ridge would then mark the boundary between the plates. Transform Boundaries The San Andreas Fault in California is an example of a transform boundary, where two plates grind past each other along what are called strike-slip faults. These boundaries don't produce spectacular features like mountains or oceans, but the halting motion often triggers large earthquakes, such as the 1906 one that devastated San Francisco.

Geologic Processes. Where do geologic hazards usually occur? From the previous chapter, it has been discussed that the surface of Earth is made up of lithospheric plates that are moving on top of the asthenosphere. These movements along the different kinds of plate boundaries are the cause of the natural geologic phenomena such as earthquakes and volcanic eruptions. Earthquakes An earthquake is the minimal to rapid shaking of the ground due to the movement of rocks along fractures, known as faults, on Earth's surface. These faults are usually associated with the parallel movement of plates in a transform fault. As the plates move, rock deformation occurs and energy starts to build up. When the rocks break, energy is released, resulting in an earthquake. The Philippines is prone to earthquakes because of the numerous faults within the country. Therefore, it is already given that the Philippines would experience a lot of geologic hazards.

The collision of oceanic and continental crust as well as the collision of two oceanic crust results in the formation of trenches and volcanic arcs. This will also result in the generation of earthquakes, tsunamis and volcanic eruptions. Earthquakes are generated when a fault on the edges of the plates occurs. That is, part of the edges of the plate breaks. The breaking causes shaking on the plates that are felt on the surface. This shaking is what we call earthquakes. When part of the plate breaks during the collision, shifting of the ocean floor happens. During the shifting, energy is released. This energy pushes the ocean water above. When this ocean water reaches the shores, we call them tsunami. During subduction, as plates reach the mantle, it will eventually be melted as magma. When these magmas find a weak spot in the crust, it forms a volcano. This volcano erupts when the crust cannot withstand the pressure exerted by the magma.

Important Preparations Before an Earthquake Strikes • Follow the structural design and engineering practices when constructing a house or building. • Evaluate the structural soundness of the buildings and houses: strengthen if necessary. • Be aware of the earthquake evacuation plans for all of the buildings you occupy regularly. • Strap or bolt heavy furniture and cabinets to the wall to keep them in place. • Breakable items, harmful chemical, and flammable materials should be stored properly in the lowermost secure shelves • Prepare and know where fire extinguishers, first aid kits, alarms, and communication facilities are located and learn how to use them beforehand. • Pick safe places in each room of your home, workplace, and school and practice doing drop, cover, and hold.Essential Things to Do While an Earthquake is Happening • Stay calm. • Duck under a sturdy desk or table and hold onto it. Protect your head with your arms. • If there is no sturdy furniture, sit on the floor in a corner next to an interior wall and cover your head and neck with your arms. • Move away from glass windows, sliding doors, shelves, cabinets, and other heavy objects. • Grab anything handy to shield your head and face from falling debris and splinting glass. • Stay indoors until the shaking stops. If you must leave the building. use the stairs rather than elevators. • Stay away from trees, power lines, posts, and concrete structures and proceed cautiously to an open area. • Move away from steep. slopes, which may be affected by landslides. • Move quickly to higher grounds since tsunamis might follow • Pull over to a clear location and stop. Avoid bridges, overpasses, and power lines, if possible. • Be updated about disaster. prevention instructions from battery operated radios.Essential Safety Measures After an Earthquake • Check yourself and others for injuries. • Do not panic. • Expect and prepare for aftershocks. These aftershocks may be weaker but they may sometimes cause more damage than the major earthquake. • Look for emergency supply kits. They should include food, water, medication, clothing, and other things you may need. • If you need to evacuate, leave a message stating where you are going • Do not enter damaged buildings since they might have weakened foundations, increasing their susceptibility for collapse. There can also be a lot of falling debris. • Do not use elevators • Check water and electrical lines for damages. Turn the main switch off to avoid any incidences of electric shock • Look for and extinguish fires to reduce their chances of spreading. • Avoid fallen power lines. • Tune in to radio broadcasts and be updated on disaster prevention instructions.

What is an earthquake? Would you be surprised to learn that several million earthquakes happen every year? Seriously. Most are so small in magnitude or size that we cannot even feel them. In fact, only 20 earthquakes are efficiently reported each year in the United States Geological Survey. Wow! That is a huge difference! The Earth has four major layers. Inner core, outer core, mantle, and crust. Think of the crust and top of the mantle like the skin of the earth. This skin is made up of different pieces of rock called tectonic plates. There are about 15 major slabs that join together, kind of like a puzzle. The edges around the tectonic plates are called plate boundaries. These massive pieces of rock slide back and forth under the Earth's surface, bumping up against each other and creating a lot of tension. This tension and movement create faults, which are basically huge cracks in the rock. When the faults get stuck, they build up pressure. And when they get unstuck, you guessed it, an earthquake. So basically, an earthquake is caused by the shifting and sliding of tectonic plates on the Earth's upper mantle and crust. There are three ways that tectonic plates shift or slide. They are subduction, lateral sliding, and spreading. Subduction happens when plates crash into each other. This can cause one plate to slide under another and be destroyed. Or the edges of the plate may rise up and form mountains. Lateral sliding means that the plates slide alongside each other, which can create lots of friction. And like you might have guessed, spreading happens when plates move apart from each other. When they do, melted rock between the plates rises and cools, forming new crust. Here's an interesting fact. Nearly 90% of all earthquakes begin in the Pacific Ocean, in an area called the Ring of Fire. It's called the Ring of Fire because along with earthquakes, it's filled with many active volcanoes. More than 450! Earthquakes can be powerful enough to change the surface of the earth and can do a lot of damage. And sometimes earthquakes can even cause other natural disasters, like avalanches, landslides, and tsunamis. Pretty wild, right? The epicenter is the location of an earthquake on the Earth's surface. The closer you are to the epicenter, the more of the earthquake you will feel. Earthquakes lose intensity as they travel away from the epicenter. Scientists measure the intensity of an earthquake using a special device called a seismograph. Seismometers detect and measure the vibrations given off by an earthquake. Magnitude is the number given to record the size of an earthquake. For example, a magnitude 5.5 is considered moderate. Above 8.0 is considered a major earthquake and we see one every year or two. Earthquakes measured at 2.5 or less are usually not felt, but can be recorded. And believe it or not, there are millions that happen each year. You can make a model of a seismograph at home, and we are going to show you how. It's activity time! You can print off directions for this one on our website at learnbright.org. You'll need a cardboard box, string, a plastic cup, a marker, small heavy objects, a long strip of paper, and a friend because this is an activity for at least two people. Now comes the fun part. One friend shakes the box, alternating between hard and soft and slow and fast, while the other friend is pulling the strip of paper through the bottom. Watch the marker as it records the movement. This is exactly what a seismograph does during an earthquake. So, in a way, we have not only created our own seismograph, but our own earthquake as well. Now, we can analyze the data just like scientists. Can you tell how hard the box was shaking based on the line? Can you tell when it was barely shaking at all? You are on your way to becoming a seismologist. A seismologist is a person that studies earthquakes. It's pretty cool to watch the process, but it's even more exciting to do it yourself. You can head on over to our website to get detailed instructions for this activity. Just download the lesson plan and as always have fun! Hope you had fun learning with us! Visit us at learnbright.org for thousands of Hope you had fun learning with us! Visit us at learnbright.org for thousands of free resources and turnkey solutions for teachers and homeschoolers.

1. What is the Earth's thickest layer? A) Crust C) Outer core B) Mantle D) Inner core 2. What is the condition required for a typhoon to form? A) High vertical wind shear C) Presence of a pre-existing disturbance B) Low sea surface temperatures D) Thick mantle layer 3. A liquid layer that surrounds the inner core. Made up of iron and nickel. A) Outer Core C) Upper Mantle B) Lower Mantle D) Lower Mantle 4. What is the name for a fold that is curved upwards? A) Syncline C) Anticline B) Monocline D) None of the above 5. What is the point on the Earth's surface directly above the focus of an earthquake? A) Seismograph C) Epicenter B) Seismogram D) Focus 6. Which seismic waves can travel through solids, liquids, and gases? A) P waves C) Love waves B) S waves D) Rayleigh waves 7. What term describes the calm center of a typhoon? A) Eyewall C) Tropical storm B) Super typhoon D) Eye 8. What is the Philippine government agency responsible for monitoring and forecasting tropical cyclones? A) PAGASA C) PAR B) PSWS D) NOAA 9. Approximately how many typhoons can enter the Philippine Area of Responsibility per year? A) 10 C) 30 B) 20 D) 40 10. What is the best way to do during an earthquake? A. I will run outside to get away from the shaking. B. I will stay indoors and take cover under a sturdy table or desk. C. I will get under a doorway or in a corner. D. I will stay in my bed and hold on to the headboard.

Earthquakes are generated when a fault on the edges of the plates occurs. That is, part of the edges of the plate breaks. The breaking causes shaking on the plates that are felt on the surface. This shaking is what we call earthquakes. When part of the plate breaks during the collision, shifting of the ocean floor happens. During the shifting, energy is released. This energy pushes the ocean water above. When this ocean water reaches the shores, we call them tsunami. During subduction, as plates reach the mantle, it will eventually be melted as magma. When these magmas find a weak spot in the crust, it forms a volcano. This volcano erupts when the crust cannot withstand the pressure exerted by the magma. Earthquakes, tsunami and eruption of volcanoes are natural disasters brought by the activity of the subduction zone. These natural disasters may cause the loss of lives, damage to properties, displacement to other areas, and livelihood.

Related quizzes

Related quizzes