It is used to divide the staff into measures. It is an important musical symbol that is used to group notes and rest.

Staff, Measure, Bar Line, and Double Bar Line

How to Stop Avalanchesnow with explosives, or by erecting snow fences. Explosives Explosives are primarily used to prevent avalanches, especially at ski resorts where other methods are often impractical. Maintenance staff from the ski resort travel to potential avalanche areas and areas with steep slopes. First, they measure the depth of the snow and its quality. They want to check for hard, loose, wet or icy snow layers. If an area is considered dangerous, small explosives are fired into the side of the steep terrain. The explosion loosens the top layer of snow, which tumbles harmlessly down the mountainside. But using explosives is costly and dangerous. Some researchers are currently experimenting with the cheaper and safer method of using ultrasonic sound waves that shock the snow into falling, averting an avalanche and saving lives. Snow Fences It is very common to put up snow nets or snow fences. These nylon nets or wooden and steel fences are placed at the top of slopes. They prevent the buildup of snow on the downwind side, thereby lessening the chance of a slab avalanche. Beacons and Radio Devices Fortunately, there are companies that specialize in making rescue beacons. These are small electronic devices that send out a radio signal to search and rescue crews. Most people who venture into the backcountry carry some sort of beacon or GPS device. They can help locate a buried victim up to 80 meters away. However, these beacons and GPS devices only send out a signal if the victim turns it on. Often, the victim is too injured to think clearly and press the 'on button.' If search and rescue crews do not quickly reach the victims, the skiers will not be discovered in time. Surviving an Avalanche If you are ever caught in an avalanche, the chances are slim that you will survive. If you are not killed instantly, you only have a short time (15~35 minutes) before your oxygen runs out. Take off your ski, boots and poles. Use a swimming motion to claw your way to the surface. Often people do not know which way is up or down. The effect of this is disorientation. It is not uncommon for avalanche victims to dig in the wrong direction. With proper precautions, both skiers and ski resorts can avoid the tragedy of an avalanche.

How to Stop Avalanches ToB A major concern of ski resorts is avalanche control. Most avalanches occur outside the boundaries of the regular groomed ski runs. But each year, skiers and trekkers on snowshoes go into these remote areas where most avalanches occur. There are two primary ways to prevent avalanches-by blasting the snow with explosives, or by erecting snow fences. Explosives Explosives are primarily used to prevent avalanches, especially at ski resorts where other methods are often impractical. Maintenance staff from the ski resort travel to potential avalanche areas and areas with steep slopes. First, they measure the depth of the snow and its quality. They want to check for hard, loose, wet or icy snow layers. If an area is considered dangerous, small explosives are fired into the side of the steep terrain. The explosion loosens the top layer of snow, which tumbles harmlessly down the mountainside. But using explosives is costly and dangerous. Some researchers are currently experimenting with the cheaper and safer method of using ultrasonic sound waves that shock the snow into falling, averting an avalanche and saving lives. Snow Fences It is very common to put up snow nets or snow fences. These nylon nets or wooden and steel fences are placed at the top of slopes. They prevent the buildup of snow on the downwind side, thereby lessening the chance of a slab avalanche. Beacons and Radio Devices Fortunately, there are companies that specialize in making rescue beacons. These are small electronic devices that send out a radio signal to search and rescue crews. Most people who venture into the backcountry carry some sort of beacon or GPS device. They can help locate a buried victim up to 80 meters away. However, these beacons and GPS devices only send out a signal if the victim turns it on. Often, the victim is too injured to think clearly and press the 'on button.' If search and rescue crews do not quickly reach the victims, the skiers will not be discovered in time. Surviving an Avalanche If you are ever caught in an avalanche, the chances are slim that you will survive. If you are not killed instantly, you only have a short time (15~35 minutes) before your oxygen runs out. Take off your ski, boots and poles. Use a swimming motion to claw your way to the surface. Often people do not know which way is up or down. The effect of this is disorientation. It is not uncommon for avalanche victims to dig in the wrong direction. With proper precautions, both skiers and ski resorts can avoid the tragedy of an avalanche.

To understand melody in music, think about some music you’re familiar with. If you were asked to hum it, what would that sound like? The part of the music that you’d hum is the melody. It’s the main thread of sound that your brain tracks and holds onto when you’re listening to music. In vocal music, the melody is sung by the lead singer. Other vocalists can provide harmony and instruments can add accompaniment, but the melody is the star of the show.What are the characteristics of melody in music? How do you describe a melody in music? A melody needs to have two things. The first is a sequence of notes, or pitches, which range from high to low. The second is rhythm, which is the timing and duration of each note. These two simple elements can create an incredible variety of combinations. Even though a melody only consists of one note at a time, it can convey so much energy and emotion. Melodies can be fast and sparkly, like “The Flight of the Bumblebee.” They can be slow and majestic, like “Finlandia.” They might be sweeping and graceful, like a Strauss waltz. Or they can be fun and exciting, like your favorite pop tunes that you love to sing along with. Melodies often tell you a lot about where a piece of music comes from. It’s easy to recognize and identify melodies from different folk traditions such as the Japanese folk song “Sakura” or the Irish tune “Star of the County Down.” Learn how to play your favorite melodies on piano, and more! Sign up now. What is melody in music? Here are some examples. Here is the famous melody for the song “Lean on Me” written out on a staff. Notice the way that the notes move up, down, and then repeat. What is melody in music? Example of Lean On Me notes on treble staff. A melody all by itself is great, but music can be even more fun when there’s an accompaniment. Here are a few bars of “Lean on Me” with the accompaniment written out. As you listen to this song, notice how the accompaniment has a very similar rhythm and movement to the melody. Then there’s that one note in the bass line that comes along every measure with its own rhythm, which adds some extra energy and movement to the song. What makes a good melody? When you create a melody, there are four types of movement you can use: Repeat (same note) Step (up or down) Skip (up or down) Leap (up or down) Stepping and repeating are the most common types of melodic motion, and this makes a melody easier to sing. Most “hummable” tunes use steps and repeats almost exclusively. This kind of melody is called conjunct. Beethoven’s “Ode to Joy,” one of the most famous melodies of all time.Skips and leaps are generally more sparing in melodies, but when thoughtfully placed they can have a powerful emotional impact. Tunes with a lot of leaps are called disjunct. Listen to Sarah Brightman sing All I Ask of You from The Phantom of the Opera starting at 0:39. This is a very disjunct melody, and challenging to sing. Great melodies also incorporate patterns that blend unity, repetition, and contrast. Our ears love patterns, but they also love novelty and growth. A good melody incorporates all of these elements. For example, listen to John William’s “Princess Leia Theme.” Can you hear the repeated pattern in the melody that gradually moves higher as the theme progresses? Now listen to the way it changes and develops into something that fits with what came before but sounds new at the same time. This is some great melodic writing! Can melody exist without rhythm? There is no way for a melody to exist without rhythm. Even if your melody only has one note, that note has a duration, and that’s the rhythm. If your melody has two notes, how long those notes last and how much time passes between hearing them is also a rhythm. A melody in music can often be recognized even when it’s performed with different rhythms. This frequently happens in live performances of pop, rock, and jazz, in which singers typically improvise slight rhythmic differences with each performance. No two renditions are exactly the same, and this constant reinterpretation keeps the music fresh. How to make a melody for a song on piano Creating your own melodies on the piano is easy and fun! There are so many ways you can discover a melody all your own. Here are a few ideas. Get some inspiration from the world around you. What can you hear right now? A clock ticking? A bird song? A car passing by your house? See if you can find some notes on the piano that imitate the sounds you hear. Think of a feeling you’d like to put into a melody. What are some ways you could make a string of notes sound happy, sad, angry, or maybe just thoughtful. Choose a line from a poem you like, or write your own. Read it out loud and put some feeling into it. Did your voice rise and fall in pitch as you were reading? Now go to the piano, start on any note you like, and try to imitate what happened when you read. Go up when your voice naturally went up, go down when your voice naturally went down. How did that sound? Now you have the perfect melody to go with those words. Too many keys on the piano? The truth is, most melodies use only a limited number of different notes. Try creating a melody using only the black keys. These form what’s called a pentatonic scale. It’s used in a lot of folk music traditions around the world and can be a great place to start if you want to create your own melodies. Remember, when you create your melody, keep it simple. Use repeated notes and steps, but add a few skips to keep things interesting. One tip about leaps: when you do put in a big leap, try doubling back and filling in the empty space you leaped over. This keeps the melody self-contained and easier to sing. Also, see if you can use the same patterns of notes and rhythms to give the melody unity, but also change those patterns to give it variety. There is no right or wrong way to create your own music. Keep trying combinations of notes and rhythms until you find something that you like. How many bars and notes are in a melody? Many types of music tend to have a prescribed number of bars, or measures. This will vary widely between different genres, and creates an overall sense of musical structure. If you’re writing a pop song, a verse will usually have between eight and sixteen bars. The prechorus that follows often has just four bars, and this “foreshortening” creates a sense of acceleration, driving the listener toward the chorus. The number of notes can also vary widely. A melody in music needs at least two notes, and a long and complex one can have hundreds or even thousands of notes. What is a countermelody in music? How many melodies should a song have? A counter melody is a melodic line that interacts with the primary melody as an independent but supportive voice. A great example of this is the song “We Don’t Talk about Bruno.” Each character sings their own melody during the piece, but these melodies all combine at the end as countermelodies. This produces a musical texture known as counterpoint. The same thing happens in “One Day More” from Les Miserables. The different melodies are first sung separately, but end up being combined in a splendid, complex texture that leads the music to its thrilling conclusion. The difference between a countermelody and regular harmony is that harmony usually supports the rhythms of the melody. A countermelody will move more independently, with different rhythms from those of the melody, and will often sound “melodic” when sung or played all by itself. A melodic song should have one main melody. This is the part that the lead voice sings. It’s usually in the spotlight, and will be the most memorable part of the music. Anything else is either harmony, countermelody, or accompaniment. Does all music have to have a melody? A piece of music doesn’t have to have a melody. There are many different kinds of music without melody. For example, a lot of music played on percussion instruments won’t have a melody. Listen to this example of Tahitian drumming. This is some great music, exciting and fun to listen to, but you’d have a hard time humming it. It’s music, but it doesn’t have a melody. Rap music is another style of music where there doesn’t have to be a melody. In rap, words are chanted rather than sung. The performer will raise and lower the pitch of their voice for emphasis, but it’s the rhythm of the words that creates most of the music. Music can even lack any melody, at least in some sections. Listen to the opening chords of “Duel of the Fates.” This choral passage is all about harmony, with little rhythmic variance or sense of melody. But it makes an effective contrast with the next section, which is bustling with rapid instrumental melodies. In some pieces, there are multiple melodic lines but there is no one main melody. When music is made up of equally important countermelodies, it creates a contrapuntal texture. Baroque composer J.S. Bach was one of the greatest masters of this style, such as in his Little Fugue in G minor. It starts with a single melodic line, the subject, but then a countermelody is added, and then more and more until several melodic lines are playing together. It’s fun to listen to, but once all the countermelodies are playing together it becomes hard to decide which part to hum along with! You’ll also hear a lot of counterpoint in jazz music, in which the different instruments are all playing together and improvising their own melodies that combine to create a rich, thick musical texture. Experience the wonder of melody in music! Whether you’re humming your favorite tune, or creating a new song all your own, melody is a memorable, shareable part of music. Enrich your music experience by being aware of, listening for, and enjoying the melodies all around you.

Chapter One: Management Today The challenges of working in the new economy recognize: 1.1 Working Today Talent Talented people- What they know, what they learn and what they can achive The source of organisational performance Develop skills and improve What is intellectual capital The combined brain power and shared knowledge of an organization's employees TO orginzations: Intellectual capital resents a strategic asset as human creativity, insight and decision making can be converted into superior performance To individuals: Intellectual capital is a personal asset, one to be nurtured and continually updated Things evolve, make sure we keep updated Intellectual capital: The package on intellect skills and capabilities that set us apart making us valable to potential employers Maintaining your talent: There is no escaping the fact that your career success will require a lot of initiative, self awareness and continuous learning Technology Tech is in our everyday lives Latest developments Smart phone, smart apparel, smart cars, smart homes We struggle to keep up with social media ana staying connected with messaging, full of email and voicemail What happenings as younger workers advance into management Flexibility Work ethic It is critical to build and maintain a high Tech IQ! What is Tech IQ: The ability to use current technologies at work and in your personal life, combined with the commitment to keep yourself updated as technology continues to evolve Intellectual capi5la is a combination of: Commitment x Competency = Intellectual capital How to make the world a better place Globalisation The worldwide interdependence of resources flows, product markets and business competition Under the influence, government leaders worry and about the competitiveness of nations just as corporate leaders worry about business competitiveness Emerging markets will power global growth over the next 20 years. By 2025 overall global consumption is forecast to reach $62 trillion, twice its 2013 level and fully half of this increase will come from the emerging world Consequence: Going to fast in uses resources, inflation, corporate greed It's cheaper to have things made in different countries (wages are low and going down) Shamrock organization 1 leaf - full time employees- standard career paths 2 leaf - “freelancers” 3 leaf - Part times without benefits (first to lose their jobs when employers face economic difficulties) The rising of emerging markets Now account for 60% of all low and medium technology manufacturing worldwide Total value add in high tech manufacturing from a low 26% in the 1970s to 48% at present China strategy to upgrade its industries and move the manufacturing value ching by prioritising 10 sectors Information technology, robotic, aerospace, maritime equipment, modern railway equipment, alternative energy vehicles, power equipment, agriculture equipment, advanced materials, biopharma and medical products Ethics A code of moral principa;s that sets standards for conduct that is “good” and “right” as well as “bad” and “wrong” Enron company huge corruption even in elections same thing happened with The Mechanism 1.2 - Organizations Organizational Purpose An orgnizations is a collection of people working together to achieve a common purpose Unique social phenomenon that enables its members to perform tasks far beyond the reach of individual accomplishment (synergy) The broad purpose of any orginzation is to provide goods or services of value to customers and clients A clear sense of purpose tied to: Quality of products and services Customer satisfaction Social responsibility Can be an important source of organisational strength and performance advantage All organisations are open systems (Systems that interact with its environment for renewal and growth) Organizations as systems All organizations are open systems that interact with their environment Continual process of obtaining resource inputs-people, information, resources and capital- and transforming them into outputs in the form of finished goods and services for customers One simple way to assess the impact of any organisation is to ask the question: How is the world different because it existed Value Creation: Organisations create value when they use resources well to produce good products and take care of their customers One simple way to assess the impact of any organization is to ask the questions: How is the world different because it existed? The 3 Ps of organizational performance Profit - is the decision economically sound? People - Does the decision treat people with respect and dignity? Planet - Is the decision good for the environment? Productivity: An overall measure of the quantity and quality of work performance with recourse utilisation taken into account Performance effectiveness: An output measure of task or goal accomplishment Performance efficiency: An input measure of the resource costs associated with goal accomplishment. Workplace changes that impact management Focus on valuing human capital Demise of “Command and control” Emphasis on teamwork Pre-eminence of technology New workforce expectations Importance of networking Concern for sustainability 1.3 Managers Importance of human resources and manger People are not ‘costs to be controlled’ High performing organizations treat people as valuable strategic assets Three takeaways 1. Give leaders broad authority 2. Encourage them to think like CEO 3. Challenge strong performers ealy with big opportunities Direct support, supervise and help activate the work efforts of others The people who managers help are the ones whose contributions represent the real work of the organisation Types of managers Line managers are responsible for work activities that directly affect organization’s output Staff managers use technical expertise to advise and support the efforts of line workers Functional managers are responsible for a single area of activity Quality of work life (QWL) An indicator of the overall quality of human experiences in the workplace QWL Indicators Respect Fair pay Safe working conditions Opportunities to learn and use new skills Room to grow and progress in a career Protection of individuals rights The organization as an upside-down pyramid A manager’s job is to support worker’s efforts The best managers are known for helping and supporting Customers at the top served by worker who are supported by managers 1.4 The management Process Managers achieve high performance for their organizations by best utilizing its humans and material resources Management is the process of planning, organizing, leading and controlling the use of resources to accomplish performance goals All managers are responsible for the four functions The functions are carried on continually Characteristics of managerial work Long hours Intense pace Fragmented and varied tasks Many communication media Filled with interpersonal relationships Managerial agendas and networks Agenda setting Develops action priorities for accomplishing goals and plans Networking Process of building and maintaining positive relationships with people who can help advance agendas Social Capital Capacity to attract support and help from others Learning The change in a behaviour that results from experience Lifelong learning The process of continuously learning from daily experiences and opportunities

The challenges of working in the new economy recognize: 1.1 Working Today Talent Talented people- What they know, what they learn and what they can achive The source of organisational performance Develop skills and improve What is intellectual capital The combined brain power and shared knowledge of an organization's employees TO orginzations: Intellectual capital resents a strategic asset as human creativity, insight and decision making can be converted into superior performance To individuals: Intellectual capital is a personal asset, one to be nurtured and continually updated Things evolve, make sure we keep updated Intellectual capital: The package on intellect skills and capabilities that set us apart making us valable to potential employers Maintaining your talent: There is no escaping the fact that your career success will require a lot of initiative, self awareness and continuous learning Technology Tech is in our everyday lives Latest developments Smart phone, smart apparel, smart cars, smart homes We struggle to keep up with social media ana staying connected with messaging, full of email and voicemail What happenings as younger workers advance into management Flexibility Work ethic It is critical to build and maintain a high Tech IQ! What is Tech IQ: The ability to use current technologies at work and in your personal life, combined with the commitment to keep yourself updated as technology continues to evolve Intellectual capi5la is a combination of: Commitment x Competency = Intellectual capital How to make the world a better place Globalisation The worldwide interdependence of resources flows, product markets and business competition Under the influence, government leaders worry and about the competitiveness of nations just as corporate leaders worry about business competitiveness Emerging markets will power global growth over the next 20 years. By 2025 overall global consumption is forecast to reach $62 trillion, twice its 2013 level and fully half of this increase will come from the emerging world Consequence: Going to fast in uses resources, inflation, corporate greed It's cheaper to have things made in different countries (wages are low and going down) Shamrock organization 1 leaf - full time employees- standard career paths 2 leaf - “freelancers” 3 leaf - Part times without benefits (first to lose their jobs when employers face economic difficulties) The rising of emerging markets Now account for 60% of all low and medium technology manufacturing worldwide Total value add in high tech manufacturing from a low 26% in the 1970s to 48% at present China strategy to upgrade its industries and move the manufacturing value ching by prioritising 10 sectors Information technology, robotic, aerospace, maritime equipment, modern railway equipment, alternative energy vehicles, power equipment, agriculture equipment, advanced materials, biopharma and medical products Ethics A code of moral principa;s that sets standards for conduct that is “good” and “right” as well as “bad” and “wrong” Enron company huge corruption even in elections same thing happened with The Mechanism 1.2 - Organizations Organizational Purpose An orgnizations is a collection of people working together to achieve a common purpose Unique social phenomenon that enables its members to perform tasks far beyond the reach of individual accomplishment (synergy) The broad purpose of any orginzation is to provide goods or services of value to customers and clients A clear sense of purpose tied to: Quality of products and services Customer satisfaction Social responsibility Can be an important source of organisational strength and performance advantage All organisations are open systems (Systems that interact with its environment for renewal and growth) Organizations as systems All organizations are open systems that interact with their environment Continual process of obtaining resource inputs-people, information, resources and capital- and transforming them into outputs in the form of finished goods and services for customers One simple way to assess the impact of any organisation is to ask the question: How is the world different because it existed Michal Porter - Value Chain Value Creation: Organisations create value when they use resources well to produce good products and take care of their customers One simple way to assess the impact of any organization is to ask the questions: How is the world different because it existed? Triple Bottom Line The 3 Ps of organizational performance Profit - is the decision economically sound? People - Does the decision treat people with respect and dignity? Planet - Is the decision good for the environment? Organizational Performance Productivity: An overall measure of the quantity and quality of work performance with recourse utilisation taken into account Performance effectiveness: An output measure of task or goal accomplishment Performance efficiency: An input measure of the resource costs associated with goal accomplishment. Workplace changes that impact management Focus on valuing human capital Demise of “Command and control” Emphasis on teamwork Pre-eminence of technology New workforce expectations Importance of networking Concern for sustainability 1.3 Managers Importance of human resources and manger People are not ‘costs to be controlled’ High performing organizations treat people as valuable strategic assets Three takeaways 1. Give leaders broad authority 2. Encourage them to think like CEO 3. Challenge strong performers easily with big opportunities Direct support, supervise and help activate the work efforts of others The people who managers help are the ones whose contributions represent the real work of the organisation Levels of management Types of managers Line managers are responsible for work activities that directly affect organization’s output Staff managers use technical expertise to advise and support the efforts of line workers Functional managers are responsible for a single area of activity Quality of work life (QWL) An indicator of the overall quality of human experiences in the workplace QWL Indicators Respect Fair pay Safe working conditions Opportunities to learn and use new skills Room to grow and progress in a career Protection of individuals rights The organization as an upside-down pyramid A manager’s job is to support worker’s efforts The best managers are known for helping and supporting Customers at the top served by worker who are supported by managers 1.4 The management Process Managers achieve high performance for their organizations by best utilizing its humans and material resources Management is the process of planning, organizing, leading and controlling the use of resources to accomplish performance goals All managers are responsible for the four functions The functions are carried on continually Four functions: Planning,organizing, leading and controlling Mintzberg’s 10 Managerial Roles Characteristics of managerial work Long hours Intense pace Fragmented and varied tasks Many communication media Filled with interpersonal relationships Managerial agendas and networks Agenda setting Develops action priorities for accomplishing goals and plans Networking Process of building and maintaining positive relationships with people who can help advance agendas Social Capital Capacity to attract support and help from others Learning The change in a behaviour that results from experience Lifelong learning The process of continuously learning from daily experiences and opportunities Katz’ Essential Managerial Skills

7.012 Employee Health The Center provides a safe working environment for all employees through a collaborative effort with them and the organization’s infection control program to identify infectious conditions that may put staff, patients and visitors at risk. Health evaluations, immunity testing for measles, mumps rubella and chickenpox, tuberculosis screening and immunity testing for hepatitis B and if not immune either signs declination form or accepts 3 dose vaccine series. (Rrefer to the Employee and Occupational Health Section policy Chapter 3.21) It is the center’s policy to monitor Health Care Associated Infections (HAI) in patients and personnel working in the Center as part of its ongoing program in Infection Prevention and Control. Staff should be encouraged to stay home when they have signs and symptoms of an infectious disease. If a staff develops signs and symptoms while at work, the person of other personnel and patients who may have been exposed to a staff member with a communicable disease should be taken into consideration. Patients and personnel can be told that they were exposed to a certain disease without disclosing the index case’s identity. In addition we work together to provide an annual influenza vaccination program that includes all staff who have patient contact, and licensed independent practitioners. Environmental Rounds - Environmental rounds are performed daily by assigned staff members, ie. “safety officer”. Feedback on opportunities for improvement is given to the Infection Control Coordinator and QAPI committee and then reported to the board Education – Employee education includes: General information about infections Techniques for prevention, surveillance, investigation and control Review of policies and procedures related to infection control: (See attachment B, policy and procedure reference list) Employee health practices; refer to Administration 3.16 Orientation and Training Offer of Hepatitis B vaccination & post exposure evaluations Annual TB skin testing Provides access to influenza vaccinations. Educates staff and licensed independent practitioners about influenza vaccination; non-vaccine infection control measures (such as the use of Droplet Precautions); and diagnosis, transmission, and potential impact of influenza. Annually evaluates vaccination participation and non-participation in the influenza immunization program and reports to Department of Health.

7.018 Safe Injection Practices (Refer to 7.07 Safe Injection Policy) Environment of Care: Active participation with all identified projects to assess compliance with infection control standards. . Surveillance, Control, and Reporting includes: Baseline information about the frequency and type of nosocomial infections. Identification of patients and/or staff with communicable or potentially communicable infections. Patients identified with a communicable disease will be isolated from other patients in the facility or, if this is not possible, they will be transferred to a local hospital for care or rescheduled. Identification of clusters of microorganisms or significant deviations from endemic level. Reporting to committees and outside agencies, when required. Investigation of infections as needed. Immediate implementation of corrective and preventive measures that result in improvements. The Infection Control nurse or designated staff member will perform facility audits and report results to the QI committee and Board of Managers. EVALUATION Evaluation and improvement of the infection prevention and control activities are important steps in the Center’s efforts to control and prevent infection. Infection prevention and control practices should become a routine part of the care, treatment, or services the center provides to patients. Patients expect and deserve hygienic and safe care even if their contact with the Center does not extend beyond a single visit. Continuous review of the goals, activities, and outcomes of the Center’s initiative are therefore followed by improvement activities that are realistic in expectation and, above all, effective. Evaluation of the plan shall include but not be limited to: Evaluation of the infection prevention and control activities annually and whenever risks significantly change. The evaluation includes a review of the following: The infection prevention and control prioritized risks The infection prevention and control goals. Implementation of infection prevention and control Outcomes of infection prevention and control activities. Findings from the evaluation are communicated at least annually to the Quality Management Committee References: http://oneandonlycampaign.org/content/what-are-they-why-follow-them. Centers for Disease Control and Prevention (CDC). (2004). Guidance for the Selection and Use of Personal Protective Equipment (PPE) in Healthcare Settings. Retrieved January 29, 2015 from www.cdc.gov/niosh/topics/bbp/sharps.html. Centers for Disease Control and Prevention (CDC). (2003). Guidelines for Environmental Infection Control in Health-Care Facilities 52(RR10);1-42. Retrieved January 29, 2015 from http://www.cdc.gov/mmwr/preview/mmwrhtml/rr5210a1.htm. Centers for Disease Control and Prevention (CDC). (2002). Guideline for Hand Hygiene in Health-Care Settings: Recommendations of the Healthcare Infection Control Practices Advisory Committee and the HICPAC/SHEA/APIC/IDSA Hand Hygiene Task Force. MMWR. 51(RR-16). Retrieved January 29, 2015 from http://www.cdc.gov/mmwr/preview/mmwrhtml/rr5116a1.htm. Centers for Disease Control and Prevention (CDC). (2008). Sharps Safety Workbook. Retrieved April 24 2014 from http://www.cdc.gov/sharpssafety/pdf/workbookcomplete.pdf. Guideline for Infection Control in Healthcare Personnnel available at: Guideline for Infection Control in Healthcare Personnel available at: http://www.cdc.gov/hicpac/pdf/InfectControl98.pdf Immunization of HealthCare Personnel, guidance available at: http://www.cdc.gov/vaccines/spec-grps/hcw.htm Occupational Safety & Health Administration (OSHA) Bloodborne Pathogens and Needlestick Prevention Standards available at: http://www.osha.gov/SLTC/bloodbornepathogens/index.html Sax H, et al. (2007). My five moments for hand hygiene: A user-centered design approach to understand, train, monitor and report hand hygiene. For the World Health Organization. J Hosp Infect 67(1):9–21. World Health Organization (WHO). (2005). World Alliance for Patient Safety. WHO Guidelines on Hand Hygiene in Health Care. Retrieved January 29 , 2015 from http://www.who.int/patientsafety/events/05/HH_en.pdf.

Related quizzes

Related quizzes