What is the primary objective of the Digital Storytelling Assessment?

To measure participants' reading speed

To improve participants' handwriting skills

What aspect of digital storytelling is highlighted in the assessment?

Development of verbal communication skills

Emphasis on physical art creation

Focus on traditional reading techniques

What does the evaluation of creativity in the Digital Storytelling Assessment involve?

Developing unique and original digital narratives

Using only text without visuals

Which of the following best describes the technical skills evaluated in the Digital Storytelling Assessment?

Using digital tools and platforms effectively

Why is content delivery an important focus in the Digital Storytelling Assessment?

It ensures the story is communicated clearly and engagingly

It encourages only visual elements without narration

It focuses solely on the length of the story

It allows participants to use complex vocabulary

What role does audience engagement play in the Digital Storytelling Assessment?

It helps measure how well the story resonates with viewers

It focuses only on visual effects

It requires extensive technical jargon

In the context of the Digital Storytelling Assessment, what does creativity contribute to the stories produced by participants?

The ability to present unique perspectives and innovative ideas

The focus on making the story longer

The necessity to use complex technical jargon

A requirement to follow a standard format

What is a key benefit of integrating technology into digital storytelling for the assessment?

Enhancing interactivity and visual appeal of stories

Limiting the use of imagination

Focusing only on written content

Encouraging passive learning experiences

What type of feedback is most valuable in the Digital Storytelling Assessment?

Constructive criticism that helps improve storytelling skills

Praise that does not identify areas for growth

Unrelated opinions about personal preferences

General comments without specific details

The objective of this Digital Storytelling Assessment is to evaluate participants' ability to create engaging and educational digital stories. This assessment aims to measure their proficiency in content delivery, creativity, technical skills, and overall presentation, emphasizing the integration of technology into educational contexts

Reading Passage: The Anatomy of a Kill Chain In the lexicon of modern warfare, the term "kill chain" describes the end-to-end process of a military attack, from the initial identification of a target to its eventual destruction and the subsequent evaluation of the strike's effectiveness. Conceptually, the kill chain is a structural model used to understand and optimize the speed and precision of military operations. The fundamental principle of this model is that an attack functions as a sequence of interdependent stages; if any single link in the chain is broken, the entire operation fails. For strategic planners, this creates a dual objective: to accelerate one's own kill chain while simultaneously finding ways to disrupt the adversary's. Strategic Concept: The Kinetic Model (F2T2EA) The traditional military kill chain is often summarized by the acronym F2T2EA, representing a continuous cycle of find, fix, track, target, engage, and assess. The kinetic kill chain begins with Find, the reconnaissance phase where intelligence assets identify a potential target within a theater of operations. Once found, the process moves to Fix, which involves pinning down the target's specific location and ensuring it can be distinguished from friendly forces or non-combatants. Track follows, maintaining a persistent watch on the target's movements to prevent its escape. In the Target phase, commanders select the appropriate weapon system and verify the legality and strategic value of the strike. Engage is the kinetic moment—the actual deployment of ordnance against the objective. Finally, Assess involves battle damage assessment (BDA) to determine if the desired effects were achieved or if further engagement is required. This model emphasizes "compressing the sensor-to-shooter timeline," meaning the faster a military can move through these steps, the more lethal it becomes. The Evolution: The Cyber Kill Chain® As warfare expanded into the digital domain, Lockheed Martin adapted the kinetic model into the Cyber Kill Chain. This framework assists defenders in identifying and stopping Advanced Persistent Threats (APTs). Unlike a physical missile, a cyberattack often unfolds over weeks or months, but the sequential logic remains the same. The model consists of seven distinct stages: Stage Description of Attacker Activity 1. Reconnaissance The harvesting of information. Attackers research targets via social media, public records, and technical scanning to find vulnerabilities. 2. Weaponization Coupling a remote access trojan with an exploit into a deliverable payload (e.g., a malicious PDF or Microsoft Office document). 3. Delivery Transmission of the weapon to the target environment. Common vectors include email attachments, malicious websites, or USB drives. 4. Exploitation The weapon triggers. The code executes on the victim's system, typically by taking advantage of a software or operating system vulnerability. 5. Installation The attacker installs a persistent backdoor or malware on the victim's system, allowing them to maintain access even after a reboot. 6. Command & Control (C2) The compromised system opens a communication channel back to the attacker's server, allowing the intruder to give manual instructions. 7. Actions on Objective The final stage where the attacker achieves their goal, such as data exfiltration, encryption for ransom, or destruction of critical infrastructure. Strategic Implications for Defense The strategic value of the Cyber Kill Chain lies in its ability to provide a roadmap for "proactive defense." By understanding the sequence, security professionals can implement controls at every stage. For instance, robust email filtering can break the chain at the Delivery stage, while endpoint detection can stop the Installation phase. Crucially, the earlier a defender breaks the chain, the lower the cost of mitigation and the lower the risk of damage. If an attacker is stopped during Reconnaissance, they have gained nothing. If they are stopped during Actions on Objective, the damage may already be catastrophic. In both kinetic and cyber environments, the goal is the same: to create a "defensive depth" that makes the cost of a successful attack prohibitively high for the adversary.

The clarifying objective is: Avoid being a victim or perpetrator of sexual abuse via digital media. To address the clarifying objective, "Avoid being a victim or perpetrator of sexual abuse via digital media," students should first understand key concepts such as digital consent, which involves obtaining clear and explicit permission before sharing or requesting private information or images. They should also learn to recognize red flags, such as grooming, coercion, or exploitative behavior, and become familiar with the laws surrounding sexting, age of consent, and the consequences of sharing explicit content without permission. Students can develop skills like maintaining safe and respectful online communication, managing privacy settings on social media, and using reporting tools to address inappropriate behavior. Additionally, fostering empathy and understanding the emotional and legal impacts of sexual abuse is crucial, as is building self-respect and a respect for others' boundaries in digital spaces. Encouraging the courage to act by rejecting uncomfortable situations and seeking help is essential. Educational sessions, interactive scenarios, and resource sharing can help implement this objective effectively. Quizzes, role-play assessments, and feedback surveys can evaluate students' understanding and confidence in avoiding risky digital behaviors. These are the performance indicators: The student will define and give examples of digital disrespect, the student will clarify behavior that is respectful and legal when using digital media, and the student will avoid using digital media in ways that may harm self or others. Create this as if LaMelo Ball was teaching it.

New Trends in Agriculture Extension approaches Extension has been, and still is, under attack from a wide spectrum of politicians and economists over its cost and financing. As a result, Extension Systems have had to make changes, by restating the system’s mission, developing a new vision for the future, and formulating plans for the necessary transition to achieve the desired change. 1. Privatization of Agricultural Extension Service Privatization: Process of funding and delivering the extension services by private individual or organization is called Private Extension. Concept: Privatization of extension refers to services rendered in rural area & allied aspects of extension personnel working in private agencies or organization for which farmers are expected to pay a fee & it can be viewed as supplementary or alternative to public extension services (Sarvanan & Shivalinge 1980). Privatization approaches ➢ Share cropping system ➢ Village extension contract system ➢ Public extension through private delivery ➢ Service for vouchers Strengths of Private Extension System ➢ More demand - driven rather than supply – driven ➢ High quality of services in terms of satisfying information needs of clientele, trained manpower, sustained finances and resource allocation ➢ Provides for an information mix and choices available to farmers ➢ Enhanced efficiency of staff ➢ Assure continuous supply and quality agricultural products ➢ More effective because farmer can select an adviser who is the best able to help ➢ Healthy competition among service provider will lead to better quality and lower costs for service Weakness of Private Extension System ➢ Concentrate on area having favorable physical environment ➢ More face-to-face contacts (person oriented) ➢ Increased dependence of farmers and hence exploitation ➢ No education role ➢ Deprivation of small farmers ➢ Hamper the free flow of information 2. Cyber Extension or e-extension Concepts Cyber space: it is the imaginary or virtual space of computers connected with each other on Networks, across the Globe. Cyber extension: it means 'using the power of online networks, computer communications and digital interactive multimedia to facilitate dissemination of agriculture technology. Cyber Extension thus can be defined as the extension over cyber space. Important tools of cyber extension E-Mail, Telnet, File Transfer Protocol (FTP), Gopher, Archie and World Wide Web (WWW) Strengths of Cyber Extension ➢ Access to the astounding information and continuously available ➢ Information rich and instantaneously available of information ➢ Interactive communication ➢ The information is available from any point on the globe ➢ Communication is dynamic ➢ Cut steps from traditional process ➢ Save money, time and effort ➢ Multiplicity of purpose Issues and Concerns of Cyber Extension ➢ Lack of Reliable Telecom Infrastructure in Rural Areas ➢ Erratic or no Power Supply ➢ Lack of ICT Trained manpower (willing to serve) in Rural Areas ➢ Lack of content (locally relevant and in local languages) ➢ Lack of Information Services to Rural Clientele ➢ Low Purchasing power of the Rural communities ➢ Lack of Holistic Approaches ➢ Issues of Sustainability Application of cyber extension ➢ Village information shops Dr. M.S. SwaminathanResearch Foundation, Chennai ➢ Information villagers MANAGE in Ranga Reddy District in Andhra pradesh ➢ Gyandoot net initiative of District Dhar, Madhya Pradesh. ➢ Warna wired village of National Informatics Center (NIC) in Kolhapur- Sangli Districts of Maharashtra 3. Market-Led-Extension (MLE) Concepts Market: A congregation of prospective buyers & sellers with a common motive of trading a particular commodity. Extension: It is the spreading/reaching out to the mass Market-led-extension: Agriculture & economics coupled with extension is the perfect blend for reaching at the door steps of common man with the help of technology. Dimensions of market-led extension ➢ Marketing mix: A planned mix of the controllable elements of a product's marketing plan commonly termed as 4Ps: product, price, place, and promotion. These four elements are adjusted until the right combination is found that serves the needs of the product's customers, while generating optimum income. ➢ Marketing plan: A marketing plan is a comprehensive document that outlines a business and marketing efforts for the coming year. It describes business activities involved in accomplishing specific marketing objectives within a set time frame. A marketing plan also includes a description of the current marketing position of a business, a discussion of the target market and a description of the marketing mix that a business will use to achieve their marketing goals. ➢ Market Intelligence: It is the information relevant to a company’s markets, gathered and analyzed specifically for the purpose of accurate and confident decision making. Market intelligence includes the process of gathering data from the company’s external environment, whereas the business intelligence process is primarily based on internal recorded events – such as sales, shipments and purchases. ➢ Market oriented production ➢ Use of Technology Strengths of market-led extension ➢ SWOT analysis of the market ➢ Organization of Farmers’ Interest Groups (FIGs) ➢ Enhancing the interactive and communication skills of the farmers ➢ Establishing marketing and agro-processing linkages ➢ Advice on product planning ➢ Educating the farming community ➢ Direct marketing ➢ Acquiring complete market intelligence ➢ Publication of agricultural market information Production of video films of success stories ➢ Challenges to market-led extension ➢ Gigantic size of extension system ➢ Information technology Diverse conditions ➢ Market intelligence ➢ Reforms in agricultural extension system Government Initiatives ➢ Central warehousing Corporation-1965 ➢ MSP by Commission for Agricultural Cost and Price (CACP) ➢ Food Corporation of India ➢ Then some others as: Cotton Corporation of India (CCI), Jute Corporation of India (JCI), National Dairy Development Board (NDDB), Agriculture and Processed food Export Development Authority (APEDA) etc. 4. Farmer--Led-Extension (FLE) Farmer--led-extension is defined as 'the provision of training by farmers to farmers, often through the creation of a structure of farmer promoters and farmer trainers' (Scarborough et al., 1997). Philosophy and principles ➢ Farmers and local institutions (e.g. producer organizations or village leaders) should play a key role in selecting farmer-trainers and monitoring and evaluating them. This helps make the programmes more accountable to the community or groups that they serve. ➢ Farmer-trainers are ‘of the community’; they communicate in local languages and are more sensitive to local cultures, mannerisms, farming practices, and farmers’ needs. ➢ Farmer-trainers should be selected on the basis of their skills and interest in sharing information, not just on their farming expertise. ➢ Farmer-trainers need strong linkages with and support from development agents (whether government, non-government organization (NGO), or private), the people who train and backstop them. Farmer-trainers generally serve as a complement to existing extension systems, rather than being a substitute for them. ➢ Facilitating organizations and local institutions need to be proactive in ensuring that women as well as men become farmer-trainers. ➢ Simple and appropriate reference materials should be made available to the farmer trainers. Essential Elements of Farmer--led-extension ➢ The group ➢ The Field ➢ The Facilitator ➢ The curriculum ➢ Programme leader ➢ Financing Special features of Farmer--led-extension ➢ All learning is field based & it is primary venue for learning ➢ FLE group learning constantly over the experimentation period ➢ FLE promotes healthy decisions & quality decisions ➢ Farmers conduct their own field studies with comparisons or treatments ➢ Facilitates Farmer-to-Farmer communication ➢ Field staff serve as facilitators ➢ FLE is a unique way to educate farmers ➢ It is an effective platform for sharing of experiences and collectively solving agriculture related problems. 5. Expert system Expert system is an intelligent computer program that uses knowledge and inferences procedures to solve problems (Daniel Hunt, 1986). Objectives of developing expert system ➢ To enhance the performance of agricultural extension personnel and farmer ➢ To make farming more efficient and profitable ➢ To reduce the time required in solving the problems ➢ To maintain the expert system by continuously upgrading the database Advantages of expert system ➢ Solves critical problems by making logical deductions without taking much time ➢ It combines experimental and conventional knowledge with the reasoning skills of specialists ➢ To enhance the performance of average worker to the level of an expert Limitations of expert system ➢ Expensive computer program ➢ Mostly developed not in regional languages ➢ Requires AC power and internet connection all the time ➢ Complex software requires computer skilled personnel Modules of expert system in agriculture ➢ COMAX: Integrated crop management in cotton ➢ SOYEX: Soybean oil extraction expert system ➢ PLANT/ds: Diagnosis of soybean diseases ➢ MAIZE: Maize expert system for field crop management ➢ SEMAGI: Weed control decision making in sunflowers ➢ Rice Crop Doctor: Developed by National Institute of Agricultural Extension Management (MANAGE) Difference between conventional and expert system of extension Conventional Extension ➢ Universal approachability of same information is a problem ➢ Information is given whatever is available without considering needs and resources ➢ No Cost benefit analysis ➢ Information flow depends on availability of agent ➢ Require users to draw their own conclusion from facts Expert System of Extension ➢ Universal approachability of same information is possible ➢ Information is chosen based on their needs and resources ➢ Cost benefit analysis ➢ Information through Cyber Cafe at any place at any time ➢ Conclusion is drawn based on the decision given by the expert

Micromarketing is an advertising strategy that allows a corporation to target a niche group with a particular product or service. With micromarketing, a company defines an audience by a specific trait, such as gender or job title or age range, and then creates campaigns geared toward that specific group. Macro-marketing is a multidisciplinary domain that deals with the impact that marketing has on the economy and society. It specializes in marketing-society interrelationships, such as green marketing, fairness and ethics, social management, market control, consumer conduct, and others. Customer relations refers to the methods, strategies, and processes a company uses to build and maintain customer relationships. Every customer interaction has an impact, and it's more important than ever for companies to consistently meet expectations.s PRODUCT DEVELOPMENT is strategy involves the improvement of current products or services or the development of the new products with the purpose of increasing sales. MARKET DEVELOPMENT is a strategy involves the introduction of existing products or services into a new geographical area or market. STRATEGIC PLANNING a broad process that can address the entire business, or a portion of the business. PLANNING the process of predicting future events and conditions and of determining the best way to attain the goals and objectives of the organization. CUSTOMER VALUE relationship between benefits and the costs including money, stress, and time to sacrifice that is necessary to get those benefits. POLITENESS Saying ”hello”, good afternoon sir/ma’am, and thank you very much are a part of good customer services. PRODUCTION PROCESS it is the process must conform to standards in terms of product quality. RELATIONSHIP MARKETING involves creating, maintaining and enhancing strong relationships with customers and other stakeholders. KEY PERFORMANCE INDICATOR a tool used to check the marketing activities and to track performance to make sure the company is on track to meet specific objectives. REACTIVE salesperson sells the product and encourage the customer to call whenever he or she has any questions or problems. MARKET PENETRATION the objective of this strategy is to increase market share of current products or services in current markets through greater and more intensive marketing efforts. LIQUIDATION this involves selling all of a company’s assets, in parts or as a whole, for their tangible worth. PRICING TEST can be utilized by marketers to calculate a product’s or service’s optimal price, to determine price elasticity. POSITIONING the process of communicating the image of a brand into the minds of consumers. INDUSTRIES business organizations that purchase goods and services for the purpose of producing other products and services or for use in their products and operating processes.

THE FIDE LAWS OF CHESS. Introduction FIDE Laws of Chess cover over-the-board play. The Laws of Chess have two parts: 1. Basic Rules of Play and 2. Competitive Rules of Play. The English text is the authentic version of the Laws of Chess (which were adopted at the 93rd FIDE Congress at Chennai, India) coming into force on 1 January 2023. Preface. The Laws of Chess cannot cover all possible situations that may arise during a game, nor can they regulate all administrative questions. Where cases are not precisely regulated by an Article of the Laws, it should be possible to reach a correct decision by studying analogous situations which are regulated in the Laws. The Laws assume that arbiters have the necessary competence, sound judgement and absolute objectivity. Too detailed a rule might deprive the arbiter of his/her freedom of judgement and thus prevent him/her from finding a solution to a problem dictated by fairness, logic and special factors. FIDE appeals to all chess players and federations to accept this view. A necessary condition for a game to be rated by FIDE is that it shall be played according to the FIDE Laws of Chess. It is recommended that competitive games not rated by FIDE be played according to the FIDE Laws of Chess. Member federations may ask FIDE to give a ruling on matters relating to the Laws of Chess. BASIC RULES OF PLAY. Article 1: The Nature and Objectives of the Game of Chess 1.1 1.2 1.3 1.4 The game of chess is played between two opponents who move their pieces on a square board called a ‘chessboard’. The player with the light-coloured pieces (White) makes the first move, then the players move alternately, with the player with the dark-coloured pieces (Black) making the next move. A player is said to ‘have the move’ when his/her opponent’s move has been ‘made’. The objective of each player is to place the opponent’s king ‘under attack’ in such a way that the opponent has no legal move. 1.4.1 The player who achieves this goal is said to have ‘checkmated’ the opponent’s king and to have won the game. Leaving one’s own king under attack, exposing one’s own king to attack and also ’capturing’ the opponent’s king is not allowed. 1.4.2 The opponent whose king has been checkmated has lost the game. 1.5 If the position is such that neither player can possibly checkmate the opponent’s king, the game is drawn (see Article 5.2.2). Article 2: The Initial Position of the Pieces on the Chessboard 2.1 2.2 The chessboard is composed of an 8 x 8 grid of 64 equal squares alternately light (the ‘white’ squares) and dark (the ‘black’ squares). The chessboard is placed between the players in such a way that the near corner square to the right of the player is white. At the beginning of the game White has 16 light-coloured pieces (the ‘white’ pieces); Black has 16 dark-coloured pieces (the ‘black’ pieces). These pieces are as follows: A white king usually indicated by the symbol K A white queen Two white rooks Two white bishops Two white knights Eight white pawns A black king A black queen Two black rooks Two black bishops Two black knights Eight black pawns usually indicated by the symbol Q usually indicated by the symbol R usually indicated by the symbol B usually indicated by the symbol N usually indicated by the symbol usually indicated by the symbol K usually indicated by the symbol Q usually indicated by the symbol R usually indicated by the symbol B usually indicated by the symbol N usually indicated by the symbol Staunton Pieces p Q K B N R 9 2.3 The initial position of the pieces on the chessboard is as follows: 2.4 The eight vertical columns of squares are called ‘files’. The eight horizontal rows of squares are called ‘ranks’. A straight line of squares of the same colour, running from one edge of the board to an adjacent edge, is called a ‘diagonal’. Article 3: The Moves of the Pieces 3.1 It is not permitted to move a piece to a square occupied by a piece of the same colour. 3.1.1 If a piece moves to a square occupied by an opponent’s piece the latter is captured and removed from the chessboard as part of the same move. 3.1.2 A piece is said to attack an opponent’s piece if the piece could make a capture on that square according to Articles 3.2 to 3.8. 3.1.3 A piece is considered to attack a square even if this piece is constrained from moving to that square because it would then leave or place the king of its own colour under attack. 3.2 The bishop may move to any square along a diagonal on which it stands. 3.3 The rook may move to any square along the file or the rank on which it stands. 3.4 The queen may move to any square along the file, the rank or a diagonal on which it stands. 3.5 3.6 3.7 When making these moves, the bishop, rook or queen may not move over any intervening pieces. The knight may move to one of the squares nearest to that on which it stands but not on the same rank, file or diagonal. 3.7 When making these moves, the bishop, rook or queen may not move over any intervening pieces. The knight may move to one of the squares nearest to that on which it stands but not on the same rank, file or diagonal. The pawn: 3.7.1 The pawn may move forward to the square immediately in front of it on the same file, provided that this square is unoccupied, or 3.7.2 on its first move the pawn may move as in 3.7.1 or alternatively it may advance two squares along the same file, provided that both squares are unoccupied, or 3.7.3 the pawn may move to a square occupied by an opponent’s piece diagonally in front of it on an adjacent file, capturing that piece. 3.7.3.1 A pawn occupying a square on the same rank as and on an adjacent file to an opponent’s pawn which has just advanced two squares in one move from its original square may capture this opponent’s pawn as though the latter had been moved only one square. 3.7.3.2 This capture is only legal on the move following this advance and is called an ‘en passant’ capture. 3.7.3.3 When a player, having the move, plays a pawn to the rank furthest from its starting position, he/she must exchange that pawn as part of the same move for a new queen, rook, bishop or knight of the same colour on the intended square of arrival. This is called the square of ‘promotion’. 3.7.3.4 The player's choice is not restricted to pieces that have been captured previously. 3.7.3.5 This exchange of a pawn for another piece is called promotion, and the effect of the new piece is immediate. 3.8 There are two different ways of moving the king: 3.8.1 by moving to an adjoining square. 3.8.2 by ‘castling’. This is a move of the king and either rook of the same colour along the player’s first rank, counting as a single move of the king and executed as follows: the king is transferred from its original square two squares towards the rook on its original square, then that rook is transferred to the square the king has just crossed. 3.8.2.1 The right to castle has been lost: 3.8.2.1.1 If the king has already moved, or 3.8.2.1.2 With a rook that has already moved. 3.8.2.2 Castling is prevented temporarily: 3.8.2.2.1 if the square on which the king stands, or the square which it must cross, or the square which it is to occupy, is attacked by one or more of the opponent's pieces, or 3.8.2.2.2 if there is any piece between the king and the rook with which castling is to be effected. 3.9 The king in check: 3.9.1 The king is said to be 'in check' if it is attacked by one or more of the opponent's pieces, even if such pieces are constrained from moving to the square occupied by the king because they would then leave or place their own king in check. 3.9.2 No piece can be moved that will either expose the king of the same colour to check or leave that king in check. 3.10 Legal and illegal moves; illegal positions: 3.10.1 A move is legal when all the relevant requirements of Articles 3.1 – 3.9 have been fulfilled. 3.10.2 A move is illegal when it fails to meet the relevant requirements of Articles 3.1 –3.9. 3.10.3 A position is illegal when it cannot have been reached by any series of legal moves. Article 4: The Act of Moving the Pieces 4.1 4.2 Each move must be played with one hand only. Adjusting the pieces or other physical contact with a piece: 4.2.1 Only the player having the move may adjust one or more pieces on their squares, provided that he/she first expresses his/her intention (for example by saying “j’adoube” or “I adjust”). 4.2.2 Any other physical contact with a piece, except for clearly accidental contact, shall be considered to be intent. 4.3 Except as provided in Article 4.2.1, if the player having the move touches on the chessboard, with the intention of moving or capturing: 4.3.1 one or more of his/her own pieces, he/she must move the first piece touched that can be moved. 4.3.2 one or more of his/her opponent’s pieces, he/she must capture the first piece touched that can be captured. 4.3.3 one or more pieces of each colour, he/she must capture the first touched opponent’s piece with his/her first touched piece or, if this is illegal, move or capture the first piece touched that can be moved or captured. If it is unclear whether the player’s own piece or his/her opponent’s was touched first, the player’s own piece shall be considered to have been touched before his/her opponent’s. 4.4 If a player having the move: 4.4.1 touches his/her king and a rook he/she must castle on that side if it is legal to do so 4.4.2 deliberately touches a rook and then his/her king he/she is not allowed to castle on that side on that move and the situation shall be governed by Article 4.3.1. 4.4.3 intending to castle, touches the king and then a rook, but castling with this rook is illegal, the player must make another legal move with his/her king (which may include castling with the other rook). If the king has no legal move, the player is free to make any legal move. 4.4.4 promotes a pawn, the choice of the piece is finalised when the piece has touched the square of promotion. 4.5 4.6 If none of the pieces touched in accordance with Article 4.3 or Article 4.4 can be moved or captured, the player may make any legal move. The act of promotion may be performed in various ways: 4.6.1 the pawn does not have to be placed on the square of arrival. 4.6.2 removing the pawn and putting the new piece on the square of promotion may occur in any order. 4.6.3 If an opponent’s piece stands on the square of promotion, it must be captured. 4.7 When, as a legal move or part of a legal move, a piece has been released on a square, it cannot be moved to another square on this move. The move is considered to have been made in the case of: 4.7.1 A capture, when the captured piece has been removed from the chessboard and the player, having placed his/her own piece on its new square, has released this capturing piece from his/her hand. 4.7.2 Castling, when the player's hand has released the rook on the square previously crossed by the king. When the player has released the king from his/her hand, the move is not yet made, but the player no longer has the right to make any move other than castling on that side, if this is legal. If castling on this side is illegal, the player must make another legal move with his/her king (which may include castling with the other rook). If the king has no legal move, the player is free to make any legal move. 4.7.3 Promotion, when the player's hand has released the new piece on the square of promotion and the pawn has been removed from the board. 4.8 4.9 A player forfeits his/her right to claim against his/her opponent’s violation of Articles 4.1 – 4.7 once the player touches a piece with the intention of moving or capturing it. 4.8. A player forfeits his/her right to claim against his/her opponent’s violation of Articles 4.1 – 4.7 .4.9. If a player is unable to move the pieces, an assistant, who shall be acceptable to the arbiter, may be provided by the player to perform this operation. Article 5: The Completion of the Game 5.1.1 The game is won by the player who has checkmated his/her opponent’s king. This immediately ends the game, provided that the move producing the checkmate position was in accordance with Article 3 and Articles 4.2 – 4.7. 5.1.2 The game is lost by the player who declares he/she resigns (this immediately ends the game), unless the position is such that the opponent cannot checkmate the player’s king by any possible series of legal moves. In this case the result of the game is a draw. 5.2.1 The game is drawn when the player to move has no legal move and his/her king is not in check. The game is said to end in ‘stalemate’. This immediately ends the game, provided that the move producing the stalemate position was in accordance with Article 3 and Articles 4.2 – 4.7. 5.2.2 The game is drawn when a position has arisen in which neither player can checkmate the opponent’s king with any series of legal moves. The game is said to end in a ‘dead position’. This immediately ends the game, provided that the move producing the position was in accordance with Article 3 and Articles 4.2 – 4.7. 5.2.3 The game is drawn upon agreement between the two players during the game, provided both players have made at least one move. This immediately ends the game. COMPETITIVE RULES OF PLAY Article 6: The Chessclock 6.1 ‘Chessclock’ means a clock with two time displays, connected to each other in such a way that only one of them can run at a time. ‘Clock’ in the Laws of Chess means one of the two time displays. Each time display has a ‘flag’. ‘Flag-fall’ means the expiration of the allotted time for a player. 6.2 Handling the chessclock: 6.2.1 During the game each player, having made his/her move on the chessboard, shall pause his/her own clock and start his/her opponent’s clock (that is to say, he/she shall press his/her clock). This “completes” the move. A move is also completed if: 6.2.1.1 6.2.1.2 the move ends the game (see Articles 5.1.1, 5.2.1, 5.2.2, 9.2.1, 9.6.1 and 9.6.2), or the player has made his/her next move, when his/her previous move was not completed. 6.2.2 A player must be allowed to pause his/her clock after making his/her move, even after the opponent has made his/her next move. The time between making the move on the chessboard and pressing the clock is regarded as part of the time allotted to the player. 6.2.3 A player must press his/her clock with the same hand with which he/she made his/her move. It is forbidden for a player to keep his/her finger on the clock or to ‘hover’ over it. 6.2.4 The players must handle the chessclock properly. It is forbidden to press it forcibly, to pick it up, to press the clock before moving or to knock it over. Improper clock handling shall be penalised in accordance with Article 12.9. 6.2.5 6.2.6 Only the player whose clock is running is allowed to adjust the pieces. If a player is unable to use the clock, an assistant, who must be acceptable to the arbiter, may be provided by the player to perform this operation. His/Her clock shall be adjusted by the arbiter in an equitable way. This adjustment of the clock shall not apply to the clock of a player with a disability. 6.3 Allotted time: 6.3.1 When using a chessclock, each player must complete a minimum number of moves or all moves in an allotted period of time including any additional amount of time added with each move. All these must be specified in advance. 6.3.2 The time saved by a player during one period is added to his/her time available for the next period, where applicable. In the time-delay mode both players receive an allotted ‘main thinking time’. Each player also receives a ‘fixed extra time’ with every move. The countdown of the main thinking time only commences after the fixed extra time has expired. Provided the player presses his/her clock before the expiration of the fixed extra time, the main thinking time does not change, irrespective of the proportion of the fixed extra time used. 6.4 Immediately after a flag falls, the requirements of Article 6.3.1 must be checked. 6.5 Before the start of the game the arbiter shall decide where the chessclock is placed. 6.6 At the time determined for the start of the game White’s clock is started.6.7. Default time: 6.7.1 The regulations of an event shall specify a default time in advance. If the default time is not specified, then it is zero. Any player who arrives at the chessboard after the default time shall lose the game unless the arbiter decides otherwise. 6.7.2 If the regulations of an event specify that the default time is not zero and if neither player is present initially, White shall lose all the time that elapses until he/she arrives, unless the regulations of an event specify, or the arbiter decides otherwise. 6.8 A flag is considered to have fallen when the arbiter observes the fact or when either player has made a valid claim to that effect. 6.9 Except where one of Articles 5.1.1, 5.1.2, 5.2.1, 5.2.2, 5.2.3 applies, if a player does not complete the prescribed number of moves in the allotted time, the game is lost by that player. However, the game is drawn if the position is such that the opponent cannot checkmate the player’s king by any possible series of legal moves. 6.10 Chessclock setting: 6.10.1 Every indication given by the chessclock is considered to be conclusive in the absence of any evident defect. A chessclock with an evident defect shall be replaced by the arbiter, who shall use his/her best judgement when determining the times to be shown on the replacement chessclock. 6.10.2 If during a game it is found that the setting of either or both clocks is incorrect, either player or the arbiter shall pause the chessclock immediately. The arbiter shall install the correct setting and adjust the times and move-counter, if necessary he/she shall use his/her best judgement when determining the clock settings. 6.11.1 If the game needs to be interrupted, the arbiter shall pause the chessclock. 6.11.2 A player may pause the chessclock only in order to seek the arbiter’s assistance, for example when promotion has taken place and the piece required is not available. 6.11.3 The arbiter shall decide when the game restarts. 6.11.4 If a player pauses the chessclock in order to seek the arbiter’s assistance, the arbiter shall determine whether the player had any valid reason for doing so. If the player has no valid reason for pausing the chessclock, the player shall be penalised in accordance with Article 12.9. 6.12.1 Screens, monitors, or demonstration boards showing the current position on the chessboard, the moves and the number of moves made/completed, and clocks which also show the number of moves, are allowed in the playing hall. 6.12.2 The player may not make a claim relying only on information shown in this manner.

*1. What is the primary objective of Step 3 in the adolescent health program development process?* a) To gather evidence for situational analysis. b) To decide on the priority issues and behaviors for the program. c) To implement interventions for various health problems. d) To assess the effectiveness of the program. *Answer: b) To decide on the priority issues and behaviors for the program.* *2. What key question is addressed in this step regarding health problems and resources?* a) How many resources can be allocated to each health problem? b) How many health problems can be addressed given the available resources? c) Which health problems have the highest prevalence in the community? d) How do we measure the success of the program? *Answer: b) How many health problems can be addressed given the available resources?* *3. Why is it necessary to prioritize health outcomes for the adolescent program?* a) To ensure that all health problems are addressed simultaneously. b) To accommodate the preferences of community leaders. c) Due to limited resources, focusing on the most immediate needs of adolescents is crucial. d) To align with evidence gathered during the situational analysis. *Answer: c) Due to limited resources, focusing on the most immediate needs of adolescents is crucial.* *4. How does the worksheet help in prioritizing health outcomes for the adolescent program?* a) By providing a list of health problems without any scoring system. b) By assigning equal scores to all health problems. c) By listing general health outcomes and specific health problems with a scoring system. d) By excluding the opinions of adolescents and community leaders. *Answer: c) By listing general health outcomes and specific health problems with a scoring system.* *5. What does the example on the prioritization worksheet illustrate about early pregnancy?* a) It is a low priority health problem. b) It has a low magnitude of the problem. c) It has a moderate level of importance in the community. d) It is the highest priority health problem with a score of 6. *Answer: d) It is the highest priority health problem with a score of 6.* *6. What does a SMART health status objective entail in the context of adolescent health program development?* a) It is a short-term outcome without specific indicators. b) It focuses solely on individual behaviors without considering community perspectives. c) It is specific, measurable, attainable, realistic, and time-bound. d) It does not require baseline data or target year for achievement. *Answer: c) It is specific, measurable, attainable, realistic, and time-bound.*

Related quizzes

Related quizzes