Using Hands Safely

1. What is the primary reason to follow manufacturer instructions when using kitchen equipment? Safety 2. What is the key element to ensure when cleaning equipment before use? Hygiene 3. What is the most common cooking method for pasta? Boiling 4. What cooking method uses high heat and fat to brown food? Frying 5. Which cooking method uses steam for a gentler cooking process? Steaming 6. What must be checked before using any kitchen equipment? Condition 7. What is used to prevent food from sticking during baking? Grease 8. What cooking method is typically used for making soups and stocks? Simmering 9. Which item is used to protect hands from burns in the kitchen? Gloves 10. What method involves cooking food slowly in a liquid just below boiling point? Poaching 1. What type of bread is commonly used for cheesy toast? Sourdough 2. What appliance is often used to melt cheese on toast? Grill 3. What type of cheese is most popular for cheesy toast? Cheddar 4. What kitchen tool spreads butter on bread? Knife 5. What seasoning adds a spicy kick to cheesy toast? Pepper 6. What ingredient is spread on bread before adding cheese? Butter 7. What texture should the cheese have after cooking? Melted 8. What color does cheese turn when perfectly toasted? Golden 9. What utensil is used to safely remove hot toast from the grill? Tongs 10. What common herb can be sprinkled on top for garnish? Parsley

Food and other form of poisoning - some substances when consumed can be dangerous to the health of human beings and can even cause death. Some substances are called poisons or toxins. Poisons can get into the body by swallowing, inhaling, by injection or via absorption through skin. Management of Food and Other Form of Poisoning • Ensure safety • If possible, find poison consumed • Avoid contact with the poison • Do not give drink or eatables • Do not induce vomiting • Arrange urgent transport to nearest healthcare facility Choking - Foreign body airway obstruction (FBAO) is one of the more common life-threatening emergencies that is seen and can be treated by the lay public. Management of Choking • Encourage to cough • Bend forward and give up to 5 back blows • Give 5 abdominal thrusts if still choking • Call for medical help Wounds are injuries that cause a break in the skin such as cuts, scrapes, or punctures. Management of Wounds • Wash hands or wear gloves if available. • Stop the bleeding by applying gentle pressure with a clean cloth or bandage. • Clean the wound using clean running water to remove dirt. • Apply antiseptic or antibiotic ointment if available. • Cover the wound with a clean bandage or gauze. • Observe for signs of infection such as redness, swelling, pain, or pus. • Seek medical help for deep, large, or heavily bleeding wounds. Hyperventilation is rapid or deep breathing often caused by anxiety, fear, or stress. Management of Hyperventilation • Stay calm and reassure the person. • Encourage slow, deep breathing through the nose and out through the mouth. • Ask the person to sit or lie down in a comfortable position. • Move the person to a quiet and well-ventilated area. • Loosen tight clothing around the neck or chest. • Do not give food or drinks during the episode. • Seek medical help if symptoms persist or the person becomes unconscious. Heat-related conditions include heat cramps, heat exhaustion, and heat stroke caused by exposure to high temperatures. Management of Heat-Related Conditions Move the person to a cool, shaded, or air-conditioned place. Loosen or remove tight clothing. Cool the body by fanning or applying cold compresses. Give cool water to drink if the person is conscious. Let the person rest in a lying position. Seek immediate medical help if there is confusion, fainting, vomiting, or very high body temperature.

Energy is very useful to us. We have proved it in our previous lessons. But do you know that, energy can also be harmful? Yes, energy can harm or cause different health problems if we expose ourselves too much to it. Too much exposure to the bright light of the sun and other artificial lights can cause… a. damage to our eyes that may lead to blindness b. skin allergies that may lead to skin cancer c. sunburn We can prevent the above health problems by… a. avoiding looking directly to the source of bright light such as the sun. b. wearing hat or using umbrella when going out of the house during the hottest part of the day which is from 10 am to 2 pm. c. putting on sunblock to protect your skin Too much heat can cause… a. dehydration or loss of body fluids because of perspiration b. burns These can be prevented by… a. drinking plenty of water b. using pot holders when handling hot objects SCIENCE 2 – MODULE 6 SEIBO COLLEGE 29 Too much exposure to loud sounds can cause… a. hearing difficulty that may lead to deafness b. nervousness We can avoid these health problems if… a. we talk softly especially when the person we are talking to is near us b. we avoid places which have loud sounds. Electrical energy can give us a comfortable life, but it can cause great danger to us. So to avoid accidents that may harm us in handling electrical devices we need to practice safety precautions. Below is a list of the things that we should do. Study it carefully. Safety Precautions in Handling Electrical Devices 1. Never play with live wires and electrical plug. 2. Never touch any electrical device with wet hands. 3. Do not overload electrical sockets. 4. Do not play or insert things especially metals into electrical outlets. 5. Never play with the switch of any electrical device

7.015 Hand Hygiene: Practice observation of hand hygiene compliance via the use of a hand hygiene survey tool to be reviewed quarterly at the QAPI committee. (Chapter 10.14 Handwashing & Surgical Antisepsis) Continue infection control education through ongoing orientation to center staff routinely and annual mandatory in-service. Continue to promote hand hygiene awareness for patients and staff by means of educational materials placed throughout the center which references the CDC/WHO guidelines. Needle-stick Injuries: (Refer to Exposure Control Plan) Use of designated safety engineered needles for injections (safety glide needles for injection and autoguard IV catheters) and blood draw. New employee and annual clinical competency for injections will be provided to all staff. The staff will be trained yearly on OSHA, blood borne pathogens and PPE. 7.016 Hand Hygiene Quality in the ASCs: based on AORN (Association of periOperative Registered Nurses) Standards and guidelines Policy: All ASC staff, including physicians, nurses, and other healthcare workers, are required to perform hand hygiene before and after any direct contact with patients, before and after any procedure, and after any contact with potentially contaminated items or surfaces. Hand hygiene must be performed using either an alcohol-based hand rub or soap and water. The alcohol-based hand rub must contain at least 60% alcohol. Staff members must ensure that their hands are free of debris and visible dirt before performing hand hygiene. Hand hygiene must be performed for a minimum of 20 seconds, and hands must be dried thoroughly after washing. Staff members must be trained on proper hand hygiene techniques and will be educated on a regular basis to ensure compliance with this policy. All staff members must comply with this policy and demonstrate compliance during inspections by ASC management and regulatory agencies. Any staff member who fails to comply with this policy will be subject to disciplinary action. ASC management will monitor compliance with this policy through regular inspections and audits and will take appropriate action to address any noncompliance issues. The ASC will maintain records of staff compliance with this policy as part of its infection control program. The ASC will review and update this policy on an annual basis or more frequently as needed to ensure that it remains current with the latest guidelines and standards for hand hygiene quality.

Fainting - is a state of temporary loss of consciousness. In fainting, blood supply to the brain is temporarily interrupted, the brain does not receive enough oxygen. Management of Fainting • Advise to lay or sit • Raise leg • Check for any injuries • Continue monitoring vital signs • Seek help or ambulance Food and other form of poisoning - some substances when consumed can be dangerous to the health of human beings and can even cause death. Some substances are called poisons or toxins. Poisons can get into the body by swallowing, inhaling, by injection or via absorption through skin. Management of Food and Other Form of Poisoning • Ensure safety • If possible, find poison consumed • Avoid contact with the poison • Do not give drink or eatables • Do not induce vomiting • Arrange urgent transport to nearest healthcare facility Choking - Foreign body airway obstruction (FBAO) is one of the more common life-threatening emergencies that is seen and can be treated by the lay public. Management of Choking • Encourage to cough • Bend forward and give up to 5 back blows • Give 5 abdominal thrusts if still choking • Call for medical help Wounds are injuries that cause a break in the skin such as cuts, scrapes, or punctures. Management of Wounds • Wash hands or wear gloves if available. • Stop the bleeding by applying gentle pressure with a clean cloth or bandage. • Clean the wound using clean running water to remove dirt. • Apply antiseptic or antibiotic ointment if available. • Cover the wound with a clean bandage or gauze. • Observe for signs of infection such as redness, swelling, pain, or pus. • Seek medical help for deep, large, or heavily bleeding wounds.

• Agriculture is growing of crops and keeping of animals. • People who practice agriculture are called farmers. • Agriculture is very important to the family. Benefits to the family • It provides food. • It provides money. • Agriculture gives us medicine. • It provides jobs. • Agriculture gives us transport and power. • It helps most families become self sufficient. • Farm tools are instruments used on farms to make work easier. • They are usually handheld and are used frequently when practicing agricultural activities. • Farm tools are light in weight, easy to handle and are suited to the strength of the farmer Name of tool Picture Use Watering can For fine watering of seed beds bucket Carrying manure, fertilizer,seed and ripe crops Name of tool Picture Use Sickle Cutting grass and harvesting of cereals like rice and wheat Slasher Cutting down tall grass and weeds USES OF FARM TOOLS Name of tool Picture Use Garden trowel Transplanting seedlings and making planting holes Hand fork Shallow cultivation of soil Aerating the soil USES OF FARM TOOLS Name of tool Picture Use Shovel Loading and offloading soil or manure into a wheelbarrow, scotch cart or truck Spade Digging and turning over of moist soil USES OF FARM TOOLS Name of tool Picture Use Garden fork Loosening and turn soil Garden line Marking straight ridges and garden beds USES OF FARM TOOLS Name of tool Picture Use wheelbarrow Moving items around the farm Items such as soil, mulch, animal feed. Etc Knapsack sprayer Spraying pesticides and herbicides Spraying fertilizers on crops. • An inventory is a record of the things that you have. • This is a list of tools issued out and tools received back and from whom Inventory of farm tools Inventory record sheets Created by Date Name of tool Sheet Tool numbenumber Description r Location Quantity Spade 1/15 Black,wooden handle Store room 2 SAFETY IN AGRICULTURE • Agricultural activities can be dangerous. • Hazards involved results in injury, disability and death of people and animals. • The hazards are usually caused by physical injury and chemical poisoning. Common hazards in Agriculture 1. physical injury These include: • Injury caused by accidents during use of farm tools, equipment and machinery. • Misuse and improper storage of farm tools and equipment. • Being kicked by animals. • Drowning in farm pond, pool or dam. Common hazards in Agriculture 2 . Chemical poisoning These include: • Spraying without protective clothing. • Eating or smoking when spraying chemicals. • Dumping toxic chemical left overs on land and in water. • Eating agriculture produces without prior permission from adults. • Pesticides, herbicides and fertilizers pollute water sources and kill animals. Chemical poisoning Ways of preventing common agricultural hazards 1. Wear protective clothing such as gloves, gumboots, respirator, hat and overalls. 2. Do not eat, drink or smoke when spraying. 3. Dispose off all chemical remains safely. 4. Bury or burn empty chemical containers and chemical left overs. 5. Wash thoroughly with running water and soap after using chemicals. 6. Do not spray during windy days. 7. Handle tools the right way. 8. Fence farm ponds and dams. Ways of preventing common agricultural hazards Climate and Landuse Seasons of Zimbabwe Seasons of Zimbabwe Definition of terms • A season is a time of the year with almost the same weather patterns. • Weather is the state of the atmosphere at a particular time at a particular place. • it is the daily condition of air around us. • Seasons are determined by rainfall and temperature. Seasons of Zimbabwe • There are four seasons in Zimbabwe , which are: 1.The rain season 2.Post rain season 3.Cool dry season 4.Hot dry season Seasons of Zimbabwe 1.The rain season ( summer) • It is also called the hot- wet season. • The season begins in mid November to mid March. • The period is rainy and hot. • Dams and rivers fill up. Seasons of Zimbabwe 2 . The post rain season ( autumn ) • It starts mid March – May • The days are bright and sunny. • The leaves change from green to red, orange, yellow or brown before falling. • In addition, there is less sunlight because the days are shorter. • It is the harvesting period of most crops. Seasons of Zimbabwe 3. The cold dry season ( winter ) • It begins mid May – mid August • The mornings, evenings and nights are very cold. • Has short days and long nights. Seasons of Zimbabwe 4 . The hot season (spring ) • It begins mid August – mid November. • The days are very hot with cool nights. • A season for trees to develop new shoots. Summer Activities Agricultural activities done during the rain season includes: • Ploughing and planting of summer crops for example maize, cotton. • Weeding • Pest and disease control • Applying fertilizers. • Weekly dipping of animals because ticks, lice and mites would be many. • Harvesting of summer crops • Preparing fireguards. A fireguard is a fire break. • Beginning of the planting of wheat, barley and oats. Winter Activities • Planting of winter crops such as wheat, barley and oats. • Harvesting and selling of summer crops continues. • Constructing frost barriers for frost sensitive crops such as tomatoes. • Vaccinating animals against blackleg. • Supplementary feeding of grazing animals. • Dosing of animals to kill internal parasites. Spring Activities • Shelling and threshing of grain crops. • Dry planting of summer crops. • Carrying manure to fields. • Ploughing and harrowing. • Making planting holes Soil Components •Soil is made up of 4 components: 1)Mineral matter 2)Organic matter 3)Soil water 4)Soil air

I. Introduction: A. Welcome and Purpose of Training Welcome to the ABA Clinic Fire and Evacuation Safety Training. The purpose of this training is to ensure the safety and well-being of everyone in the clinic by preparing staff for effective response to fire emergencies and evacuation situations. B. Importance of Evacuation and Fire Safety Understanding the gravity of evacuation and fire safety is paramount. Compliance with safety standards not only meets regulatory requirements but also safeguards the lives of our clients, staff, and visitors. II. Overview of Fire Safety Standards: A. Explanation of Relevant Fire Safety Codes and Standards Our clinic strictly adheres to [Insert Relevant Fire Safety Codes and Standards], including guidelines from the National Fire Protection Association (NFPA) and local fire authorities. Familiarity with these standards is essential for maintaining a safe environment. B. Importance of Compliance Compliance with fire safety standards is a commitment to the well-being of our community. It sets the foundation for a secure and prepared clinic, ensuring a proactive approach to fire safety. III. Fire Prevention Measures: A. Identifying Fire Hazards in the Clinic Regular inspections, conducted quarterly, will identify potential fire hazards, including faulty wiring, overheating equipment, or improperly stored flammable materials. Staff is encouraged to report any potential hazards immediately. B. Proper Storage of Flammable Materials Flammable materials are stored in designated areas equipped with fire-resistant cabinets and safety measures. These areas are clearly marked, and staff is trained on proper storage procedures. C. Electrical Safety Tips Staff is trained to recognize and report any electrical issues promptly. Furthermore, electrical equipment undergoes regular maintenance checks to prevent electrical fires. D. Smoking Policy Smoking is strictly prohibited within the clinic premises. Designated smoking areas, equipped with fire-resistant receptacles, are provided outside the building, ensuring compliance with safety regulations. IV. Emergency Communication: A. Overview of Communication Systems Our clinic utilizes a robust communication system, including intercoms and a mass notification system, to relay emergency information promptly to all staff members. B. Designation of Emergency Contacts Emergency contact information for all staff members is regularly updated. Designated individuals are responsible for initiating emergency communication and ensuring all staff are informed. C. Internal Communication Protocols Clear internal communication protocols are established, outlining the chain of command and communication channels during emergency situations. Staff members are familiarized with these protocols during onboarding. V. Evacuation Procedures: A. Evacuation Routes Evacuation routes are clearly marked throughout the clinic, indicating the shortest and safest paths to exit points. These routes are reviewed annually and updated as needed. B. Emergency Exits and Assembly Points Staff is familiarized with the location of emergency exits and assembly points during regular drills. These drills, conducted quarterly, ensure that all staff are well-practiced in evacuation procedures. C. Evacuation Drills Evacuation drills are conducted quarterly, simulating various emergency scenarios. These drills include scenarios involving individuals with special needs, ensuring staff are equipped to assist everyone during evacuations. D. Assistance for Individuals with Special Needs Staff members receive specialized training on providing assistance to individuals with special needs during evacuations. This includes utilizing evacuation chairs, providing verbal guidance, and ensuring a calm and supportive approach. VI. Fire Extinguisher Training: A. Types of Fire Extinguishers Staff is trained on the different types of fire extinguishers available in the clinic, including ABC and CO2 extinguishers. Training includes recognizing the appropriate use for each type. B. Proper Use and Handling Hands-on demonstrations are provided to staff, allowing them to practice the proper use and handling of fire extinguishers. Emphasis is placed on safety precautions, including maintaining a safe distance and using the PASS method (Pull, Aim, Squeeze, Sweep). C. Location of Fire Extinguishers in the Clinic A map indicating the locations of all fire extinguishers is prominently displayed throughout the clinic. Staff is familiarized with these locations during training sessions. VII. Emergency Response Team: A. Designation of Emergency Response Team Members An Emergency Response Team is designated, comprising individuals from different departments. Team members receive specialized training and are identified by distinctive vests during emergencies. B. Roles and Responsibilities Clear roles and responsibilities for Emergency Response Team members are outlined in the Emergency Response Plan. This includes responsibilities such as assisting with evacuations, providing first aid, and coordinating with emergency services. C. Training for First Aid and CPR Emergency Response Team members receive regular training in first aid and CPR. Training sessions are conducted semi-annually to ensure team members are proficient in life- saving techniques. VIII. Mock Scenarios: A. Conducting Simulated Fire Drills Simulated fire drills are conducted quarterly, involving all staff members. These drills include various fire scenarios, such as small fires, smoke-filled areas, and evacuations of different areas within the clinic. B. Addressing Various Emergency Scenarios Staff members engage in discussions and practical exercises addressing various emergency scenarios, fostering a proactive mindset. Scenarios include power outages, medical emergencies, and coordination with external emergency services. C. Feedback and Improvement Strategies Feedback from drills is collected and analyzed to identify areas for improvement. Regular meetings are held to discuss feedback and implement necessary changes to enhance emergency response strategies. IX. Documentation and Record-Keeping: A. Importance of Documentation Accurate and detailed documentation of all safety-related activities is maintained, including inspection reports, drill records, and incident reports. This documentation is crucial for compliance and continuous improvement. B. Incident Reporting Procedures Staff is trained on the proper procedures for reporting incidents. Incident reports include details such as the nature of the incident, individuals involved, and actions taken. A designated individual reviews and addresses incident reports promptly. C. Regular Audits and Reviews Regular audits and reviews of safety procedures are conducted annually by an external safety consultant. This ensures that the clinic's safety protocols align with the latest standards and identifies areas for continuous improveme

1. Flammable materials, like alcohol, should never be dispensed or used near A. an open door. B. an open flame. C. another student. D. a sink. 2. If a laboratory fire erupts, immediately A. notify your instructor. B. run for the fire extinguisher. C. throw water on the fire. D. open the windows. 3. Approved eye protection devices (such as goggles) are worn in the laboratory A. to avoid eye strain. B. to improve your vision. C. only if you don’t have corrective glasses. D. any time chemicals, heat or glassware are used. 4. If you wear contact lenses in the school laboratory, A. take them out before starting the lab. B. you do not have to wear protective goggles. C. advise your science instructor that you wear contact lenses. D. keep the information to yourself. 5. If you do not understand a direction or part of a lab procedure, you should A. figure it out as you do the lab. B. try several methods until something works. C. ask the instructor before proceeding. D. skip it and go on to the next part. 6. After completing an experiment, all chemical wastes should be A. left at your lab station for the next class. B. disposed of according to your instructor’s directions. C. dumped in the sink. D. taken home. 7. If a lab experiment is not completed, you should A. discuss the issue with your instructor. B. sneak in after school and work alone. C. come in during lunch and finish while eating lunch. D. make up some results. 8. You are heating a substance in a test tube. Always point the open end of the tube A. toward yourself. B. toward your lab partner. C. toward another classmate. D. away from all people. Science Laboratory Safety teSt 9. You are heating a piece of glass and now want to pick it up. You should A. use a rag or paper towels. B. pick up the end that looks cooler. C. use tongs. D. pour cold water on it. 10. You have been injured in the laboratory (cut, burn, etc.). First you should A. visit the school nurse after class. B. see a doctor after school. C. tell the science instructor at once. D. apply first aid yourself. 11. When gathering glassware and equipment for an experiment, you should A. read all directions carefully to know what equipment is necessary. B. examine all glassware to check for chips or cracks. C. clean any glassware that appears dirty. D. All of the above. 12. You want to place a piece of glass tubing into a rubber stopper after the tubing has been fire polished and cooled. This is best done by A. lubricating the tubing with water or glycerin. B. using a towel or cotton gloves for protection. C. twisting the tubing and stopper carefully. D. all of the above. 13. Personal eyeglasses provide as much protection as A. a face shield. B. safety glasses. C. splashproof chemical goggles. D. none of the above. 14. Long hair in the laboratory must be A. cut short. B. held away from the experiment with one hand. C. always neatly groomed. D. tied back or kept entirely out of the way with a hair band, hairpins, or other confining device. 15. In a laboratory, the following should not be worn. A. loose clothing. B. dangling jewelry. C. sandals. D. all of the above. 16. The following footwear is best in the laboratory. A. sandals B. open-toed shoes C. closed-toed shoes D. shoes appropriate for the weather3 © 2017 Flinn Scientific, Inc. All Rights Reserved. 17. Horseplay or practical jokes in the laboratory are A. always against the rules. B. okay. C. not dangerous. D. okay if you are working alone. 18. If a piece of equipment is not working properly, stop, turn it off, and tell A. the custodian. B. your lab partner. C. your best friend in the class. D. the science instructor. 19. If an acid is splashed on your skin, wash at once with A. soap. B. oil. C. weak base. D. plenty of water. 20. When you finish working with chemicals, biological specimens, and other lab substances, always A. treat your hands with skin lotion. B. wash your hands thoroughly with soap and water. C. wipe your hands on a towel. D. wipe your hands on your clothes. True—False T F 22. ■ ■ Hot glass looks the same as cold glass. 23. ■ ■ All chemicals in the lab are to be considered dangerous. 24. ■ ■ Return all unused chemicals to their original containers. 25. ■ ■ Work areas should be kept clean and tidy. 26. ■ ■ Pipets are used to measure and dispense small amounts of liquids. You should draw the liquid into the pipet using your mouth. 27. ■ ■ Laboratory work can be started immediately upon entering the laboratory even if the instructor is not yet present. 28. ■ ■ Never remove chemicals or other equipment from the laboratory. T F 29. ■ ■ Chipped or cracked glassware is okay to use. 30. ■ ■ Read all procedures thoroughly before entering the laboratory. 31. ■ ■ All unauthorized experiments are prohibited. 32. ■ ■ You are allowed to enter the chemical preparation/storage area any time you need to get an item. 33. ■ ■ Laboratory aprons should be worn during all lab activities. 34. ■ ■ It’s okay to pick up broken glass with your bare hands as long as the glass is placed in the trash. 35. ■ ■ Never leave a lit burner unattended. 21. Draw a diagram of your science room and label the locations of the following: ■ Fire Blanket ■ Fire Extinguisher(s) ■ Exits ■ Eyewash Station ■ Emergency Shower ■ Closest Fire Alarm Station ■ Waste Disposal Container(s)4 © 2017 Flinn Scientific, Inc. All Rights Reserved. Name: ________________________________________________ Date: ______________________________________________ 1. Flammable materials, like alcohol, should never be dispensed or used near A. an open door. B. an open flame. C. another student. D. a sink. 2. If a laboratory fire erupts, immediately A. notify your instructor. B. run for the fire extinguisher. C. throw water on the fire. D. open the windows. 3. Approved eye protection devices (such as goggles) are worn in the laboratory A. to avoid eye strain. B. to improve your vision. C. only if you don’t have corrective glasses. D. any time chemicals, heat or glassware are used. 4. If you wear contact lenses in the school laboratory, A. take them out before starting the lab. B. you do not have to wear protective goggles. C. advise your science instructor that you wear contact lenses. D. keep the information to yourself. 5. If you do not understand a direction or part of a lab procedure, you should A. figure it out as you do the lab. B. try several methods until something works. C. ask the instructor before proceeding. D. skip it and go on to the next part. 6. After completing an experiment, all chemical wastes should be A. left at your lab station for the next class. B. disposed of according to your instructor’s directions. C. dumped in the sink. D. taken home. 7. If a lab experiment is not completed, you should A. discuss the issue with your instructor. B. sneak in after school and work alone. C. come in during lunch and finish while eating lunch. D. make up some results. 8. You are heating a substance in a test tube. Always point the open end of the tube A. toward yourself. B. toward your lab partner. C. toward another classmate. D. away from all people. Science Laboratory Safety teSt 9. You are heating a piece of glass and now want to pick it up. You should A. use a rag or paper towels. B. pick up the end that looks cooler. C. use tongs. D. pour cold water on it. 10. You have been injured in the laboratory (cut, burn, etc.). First you should A. visit the school nurse after class. B. see a doctor after school. C. tell the science instructor at once. D. apply first aid yourself. 11. When gathering glassware and equipment for an experiment, you should A. read all directions carefully to know what equipment is necessary. B. examine all glassware to check for chips or cracks. C. clean any glassware that appears dirty. D. All of the above. 12. You want to place a piece of glass tubing into a rubber stopper after the tubing has been fire polished and cooled. This is best done by A. lubricating the tubing with water or glycerin. B. using a towel or cotton gloves for protection. C. twisting the tubing and stopper carefully. D. all of the above. 13. Personal eyeglasses provide as much protection as A. a face shield. B. safety glasses. C. splashproof chemical goggles. D. none of the above. 14. Long hair in the laboratory must be A. cut short. B. held away from the experiment with one hand. C. always neatly groomed. D. tied back or kept entirely out of the way with a hair band, hairpins, or other confining device. 15. In a laboratory, the following should not be worn. A. loose clothing. B. dangling jewelry. C. sandals. D. all of the above. 16. The following footwear is best in the laboratory. A. sandals B. open-toed shoes C. closed-toed shoes D. shoes appropriate for the weather5 © 2017 Flinn Scientific, Inc. All Rights Reserved. 17. Horseplay or practical jokes in the laboratory are A. always against the rules. B. okay. C. not dangerous. D. okay if you are working alone. 18. If a piece of equipment is not working properly, stop, turn it off, and tell A. the custodian. B. your lab partner. C. your best friend in the class. D. the science instructor. 19. If an acid is splashed on your skin, wash at once with A. soap. B. oil. C. weak base. D. plenty of water. 20. When you finish working with chemicals, biological specimens, and other lab substances, always A. treat your hands with skin lotion. B. wash your hands thoroughly with soap and water. C. wipe your hands on a towel. D. wipe your hands on your clothes. 21. Draw a diagram of your science room and label the locations of the following: ■ Fire Blanket ■ Fire Extinguisher(s) ■ Exits ■ Eyewash Station ■ Emergency Shower ■ Closest Fire Alarm Station ■ Waste Disposal Container(s) True—False T F 22. ■ ■ Hot glass looks the same as cold glass. 23. ■ ■ All chemicals in the lab are to be considered dangerous. 24. ■ ■ Return all unused chemicals to their original containers. 25. ■ ■ Work areas should be kept clean and tidy. 26. ■ ■ Pipets are used to measure and dispense small amounts of liquids. You should draw the liquid into the pipet using your mouth. 27. ■ ■ Laboratory work can be started immediately upon entering the laboratory even if the instructor is not yet present. 28. ■ ■ Never remove chemicals or other equipment from the laboratory. T F 29. ■ ■ Chipped or cracked glassware is okay to use. 30. ■ ■ Read all procedures thoroughly before entering the laboratory. 31. ■ ■ All unauthorized experiments are prohibited. 32. ■ ■ You are allowed to enter the chemical preparation/storage area any time you need to get an item. 33. ■ ■ Laboratory aprons should be worn during all lab activities. 34. ■ ■ It’s okay to pick up broken glass with your bare hands as long as the glass is placed in the trash. 35. ■ ■ Never leave a lit burner unattended.

Related quizzes

Related quizzes