A welding position where the joint is on a vertical plane and the line of weld runs parallel with the horizon.

In making lap joint using horizontal position, the electrode position is slanted in the direction of weld about

The required electrode for depositing root pass.

In tacking the plates to be welded, the gap to maintain between plates should be

A weld type in a cross-sectional shape of a triangle is called

The exposed surface of fillet weld bounded by the weld toes of the side on which welding was done is

Fillet weld leg is the distance from the joint root to

The surface of the base metal that is melted during the welding process

The fillet weld sizes are indicated by

To obtain the desired contour in fillet welding, it requires

To show concern about safety and health of welders, the government has

These are hazards related to welding, except

To prevent arc rays from skin contact, welders should wear clothes without

Here are safety devices that welding workplace must have except

The type of clothing that will not disintegrate from arc radiation or will not catch fire quickly is

The common weld used in metalworks industry.

17. The area where the filler metal intersects with the base metal opposite the weld face is

It is the condition that occurs when the base metal and the filler metal are melted together.

The work and travel angle in depositing root pass for lap joint using horizontal position is____________.

Which of the following procedure is correct in performing lap joint in horizontal position?

What is the most common metal used in fabrication and manufacturing?

What percentage of carbon content in a steel is required before it will become weldable?

To obtain the desired contour in fillet welding, it requires

What is the required work and travel angle for depositing straight beads in horizontal position?

Which of the following procedure is correct in depositing straight beads in horizontal position?

What is the most common type of electrode used in performing lap joint using horizontal position?

What is the required travel and work angle for depositing second pass in lap joint using horizontal position?

What is the required travel and work angle for depositing third pass lap joint using horizontal position?

What is the required electrode for welding straight beads in horizontal position?

In performing straight beads in horizontal position, which of the following tool is NOT included?

The cross-sectional shape of the completed weld face is also known as________.

What method is used to achieved the required surface finish?

In 5S, it means distinguishing or sort out between ‘wanted’ and ‘unwanted items’ at place of work and removal of unwanted items.

This means ensuring that whatever cleanliness and orderliness is achieved should be maintained.

In 5S, it also means ‘Discipline’.

36. This means a place for everything (necessary) and everything in its place.

What process is designed to organize the workplace, keep it clean, and maintain effective and standard conditions.

Who popularized 5S in Japan during the 80’s.

Seiton means______.

Which of the following procedure is correct for welding lap joint in horizontal position?

Which of these procedures in welding lap joint should be first?

A welding position where the joints are on horizontal plane and the line of weld runs perpendicular or uphill.

What is the recommended travel angle for welding in vertical position?

What is the recommended current setting for welding in vertical position?

What is the recommended starting point when welding in vertical position?

Why E-7018 electrode is more appropriate for welding vertical position?

What is the most common type of electrode used in performing lap joint using horizontal position?

What is the best remedy for both pinholes and porosity caused when arc length is too long and it travels too fast?

What is the remedy for undercutting caused by too high current or too long arc length?

Danilo works on his metal art as a project in SMAW. He noticed that the electrode sticks frequently to the metal. What do you think is the problem?