They are metal bars shaped like the letter “U” and threaded at the end of each arm.

These nuts are extremely versatile but require a wrench for installation.

They are placed against a bolt or nut to prevent the fastener from becoming loose.

These fasteners differ primarily in thread specification, length, and head shape

It is often used alongside a bolt or a threaded rod that features a pre-drilled hole, where a cotter pin can be used to secure the fixing and prevent movement.

It is used in conjunction with a screw fastener such as a bolt and nut and that usually serves either to keep the screw from loosening.

. They are used to fasten parts together in the various areas of vehicles

This special bolt is tightened to the specified tightening torque.

It protects bolt threads underneath it, whilst providing a cleaner, more aesthetically pleasing appearance and improving safety on some applications.

They are collection of products that are used in automotive and vehicle assembly

Felcoprene is a synthetic rubber compound

Automotive gaskets are built to bear both highand low compressive loads.

The Manifold Gaskets is compressed between the enginevblock and the cylinder head.

Metal is a perforated steel base with asbestos, mechanically bonded to one or both sides.

Sealants are liquefied gaskets that prevent leakage

Structural adhesives areused in bonding brake linings, disc pads, clutch facings, and automatictransmission bands.

They are sharply carved and hardened special metallic shaft-like devices used for cutting internal screw threads.

These are generally used for initiating a thread and are usually tapered from the bottom point up to the sixth thread from the top.

It is not tapered and is solely used for the purpose of producing neat finishes to the ends of blind holes or very deep through holes.

It is generally used for creating small threads.

A type of Die that can be set to cut larger or smaller diameter. It is generally used for creating small as well as large threads.

It is a high-strength steelshaft with a square head on one end and reverse tapered cutting screw threads on the other end.

 They are adaptive mechanisms used in pipe fittings.

These are an adjustable type of pliers with a toothed groove along the upper handle, allowing the lower jaw to be locked into a number of positions.

They are used to adapt the drive size of a socket for use with a wrench with a different drive size.

Hand tools that  are especially used to access difficult-to-reach fasteners around obstacles

Is a tool used to control and apply a specific torque to a fastener such as a bolt or a nut.

Another double-ended tool, the combinationwrench is made up of an open-end on one side and a box-end on the other.

They are short-length wrenches.

a wrench similar to an open end wrench but having one fixed jaw and one adjustable jaw.