Beginning R Blends

Can you create an evaluation using this information PHONETICS VS. PHONOLOGY Whereas phonetics is the study of sounds that occur in language, phonology is the study of how these sounds are organized and how they function in language. It uses the classifications of sounds derived from phonetics to describe and analyze how sounds occur in speech. STRUCTURALIST PHONEMICS STRUCTURALIST PHONEMICS As linguists began to study sounds in fine detail, they recognized increasingly complex aspects of phonetic organization. For example, the sound /p/ appears in different varieties in English. STRUCTURALIST PHONEMICS One of the varieties of /p/ is indicated by [ph]. This sound is produced with an accompanying puff of air called aspiration, as in the words “pill,” and “peace.” Another sound, indicated by [p•], is produced when there is little or no aspiration; this sound occurs in a word like “spill.” A third major variety for the /p/ sound is the unreleased [p– ], which may occur at the end of a word like “stop.” To deal with these variations for the /p/ sound, the structuralists suggested the existence of an abstract unit which they termed a phoneme. STRUCTURALIST PHONEMICS A phoneme was defined by the structuralists as an abstract phonological unit that represents a class of real sounds, termed the allophones of a phoneme. The phoneme /p/ in English, then, is represented by the allophones [ph], [p•], and [p– ]. STRUCTURALISTS: MINIMAL PAIRS How do we know what these abstract units of sound called phonemes are? In order to find the phonemes of a language, the structuralists developed the concept of the minimal pair, defined as any two words that: a) Contain the same number of segments b) Differ in meaning c) Exhibit only one phonetic difference. STRUCTURALISTS: MINIMAL PAIRS In practical terms, phonemes distinguish meanings; and a phoneme can also be defined as the smallest meaning-distinguishing unit of sound. For instance, the words “pin” /pɪn/ and “bin” /bɪn/ mean different things, and the only one difference in these words occurs in the initial sounds. STRUCTURALISTS: MINIMAL PAIRS By using the concept of a minimal pair, we can determine that the three variations of the /p/ sound do not represent three phonemes. Certainly, it is possible to pronounce the word cap with either an aspirated [ph ] or unreleased [p– ]; however, the two forms [kæph ] and [kæp– ] are not a minimal pair, even though they involve different sounds, because they are identical in meaning. STRUCTURALISTS: FREE VARIATION The two forms [kæph ] and [kæp– ] are, therefore, said to exhibit free variation: that is, the pronunciation may vary without signifying a change in meaning. In other words, we may conclude that the unreleased [p– ] and the aspirated [ph ] are not representations of different phonemes in English; they are, in fact, allophones of one phoneme, /p/. STRUCTURALISTS: COMPLEMENTARY DISTRIBUTION When phonemes have more than one allophone in a language, the allophones are said to be in complementary distribution. Complementary distribution means that the allophones of a phoneme occur in different phonetic environments (that is, with different sounds surrounding them). TRANSFORMATIONAL- GENERATIVE PHONOLOGY TRANSFORMATIONAL-GENERATIVE PHONOLOGY Transformational-generative phonology is a relatively recent development in linguistic theory. Chomsky launched Transformational-Generative Grammar in 1957, but the earliest studies within this framework were largely concerned with syntax. A decade later, the first comprehensive transformational-generative treatment of English phonology appeared: Chomsky and Halle’s The Sound Pattern of English (1968). TRANSFORMATIONAL-GENERATIVE PHONOLOGY Transformational-generative phonologists strongly oppose the structuralists’ phonemic level. They replace this level by a series of rules that directly relate underlying representations to observed phonetic representations. The central mechanisms in transformational-generative phonology, then, are underlying representations and phonological rules. PHONOLOGICAL RULES A rule is an operational statement in which some linguistic entity is modified, resulting in a new linguistic entity. Rules may add elements, remove elements, or change elements. By using phonological rules, linguists attempt to demonstrate that there is order in linguistic phenomena and that linguistic patterns are systematic. PHONOLOGICAL DERIVATION A phonological derivation is an operation that begins with an underlying representation and, through the application of a set of specific rules, yields the actual sound the speaker produces. The representation of a phonological rule has the following general appearance. /A/ → [B] / C “A” changes to “B” under condition “C” PHONOLOGICAL RULE – EXAMPLE In most Southern dialects, the word ten is pronounced like the word tin. This is not an isolated fact, for den is pronounced like din and Ben is pronounced like bin, and so on. This very general fact can be represented by the phonological rule: /ɛ/ → [I] / ___ [n] den /dɛn/ → /dIn/ Ben /bɛn/ → /bIn/ ten /tɛn/ → /tIn/ /ɛ/ → [I] / ___ [n] - high - low - tense + front + high - tense + front + sonorant + anterior + coronal - continuant NOTATIONAL DEVICES IN PHONOLOGICAL RULES The statement of phonological rules can be complex, and linguists have developed several notational devices for writing them. Often, the following symbols will be necessary for stating the conditions under which rules apply: # indicates a word boundary + indicates an intraword boundary $ indicates a syllable boundary UNDERLYING REPRESENTATIONS AND RELATED ISSUES The transformational-generative description of phonology relates underlying representations to phonetic representations by rules. This can be represented in a simple example: In English, there are certain pairs of words like sign / signature, and malign / malignant that exhibit a regular alternation in their phonetic representations: [g] is present in the second member of the pairs but absent in the first member. UNDERLYING REPRESENTATIONS AND RELATED ISSUES To explain the relatedness of words such as sign / signature, we could claim that the underlying representation of the segment in all such pairs is /g/ and that a rule operates to delete /g/ before syllable-final nasals. Thus, the rule “/g/ is deleted before syllable-final nasal” would appear formally as: + voice - anterior →∅ ____ [+ nasal] $ - coronal UNDERLYING REPRESENTATIONS AND RELATED ISSUES On the left-hand side of the arrow, we place the features needed to uniquely specify /g/ among the consonants; that is, no other consonant has the features [+ voice], [- anterior], and [- coronal]. The symbols → mean that the sound /g/ changes to nothing or more properly “/g/ is deleted.” The horizontal line following the slash mark refers to the position of /g/ - namely, before a segment that is [+nasal]. Finally, this [+nasal] segment occurs before a syllable boundary, as indicated by $. A less formal way of writing this rule would be: /g/ → / _ [+nasal] $ Notice that this rule also helps describe such alternations as phlegm/phlegmatic and paradigm/paradigmatic. Application Activity: Think of other words in which this rule can be applied. Write the sound segments to prove /g/ is deleted. Another example is the process through which the prefix meaning “not” is added to words. This prefix alternates among the forms /Im/, /In/, and /Iŋ/, depending on the point of articulation of the initial segment of the following word. -If the segment begins in the extreme front part of the mouth (labials), the form is /Im/, as in improper. -If the segment begins in the extreme back part of the mouth (velars), the form is /Iŋ/, as in incomplete. -If the segment begins in the mid-region of the mouth (all other sounds), the form is /In/, as in indecent. *Exceptions:Words beginning with /r/ or /l/. Analyze the Word “in + complete,” for example. /n/ → [ŋ] / __ [k] - continuant - continuant - continuant + sonorant → + sonorant - sonorant + anterior - anterior - strident + coronal - coronal - coronal + tense THE VELAR SOFTENING RULE Still another example of alternation in English is found in pairs of words like “electric / electricity,” in which the segments /k/ and /s/ alternate. /k/ changes to [s] only before non- low, front vowels. THE VELAR SOFTENING RULE /k/ → [s] / __ - continuant + continuant - strident → - sonorant V - anterior + anterior - low - coronal + coronal - back

Abstract The main focus of this research is to discuss the perspective of the teamwork and its impaction organizational performance and success. Also highlight the Meanings of Team and its work sprit towards batter organizational performance and specific to its impact on the success of organization that provided the basis for this research study. In this research study a thoroughly focus was on organization and teamwork. The aim of this research is to deliver a participative view of teamwork in the organization, and also discourses the major issues and emphases on the recent work that opens the basis to move research onward. There is much worth in taking a more focus on the essential areas of teamwork. The team signifies the spirit and working capacity of the employees as team to bring organization to the success. The various explanations, definitions, processes, dimensions, team size and benefits etc. regarding the above topic teamwork and organizational success is highlighted. Keywords: Teamwork, Success, Organization, Performance, Work Groups, Employees Introduction It is indeed human beings have learned in their beginning of life to work together as (Team) that have made such a remarkable developments as unique specie. Human beings have experience throughout their social history, lived, loved, grow younger to older and worked together in groups said West M.A. (2012).The mutual social knowledge of living and functioning together creates connection among people, society and families. When work is done cooperatively as a team it can achieve extremely extra work than individually. Team can be defined as in the human society to live, to work and to play and to cooperate with others for particular task. According to John W. Newstrom et al (1993) “team is the process of assessing performance of workers, passing information and exploring methods to increase performance”. If observe closely, one can discover the instances of The Government: Research Journal of Political Science Supplementary Edition Vol. III 88 The Government social (teams) they are functioning either effectively or ineffectively everywhere; organizations, schools, work place, home etc. “Coordinating the events of people is like sand house, making by using a sole particles of sand” expressed Belbin, R. M.(2010). Moreover it is one of the general myths that the skill of team member is more important than their vigor, attention and determination for the tasks. Another widespread myth is that the team members are not alone accountable for the achievements or failures of their tasks the truth is that the members are the small parts in the teams and their individual abilities effect on the various results in team. The working relationships exist among team that might sight these relationships at different levels of involvement or relationships among the members as they move towards the degree of communication, integration and commitment increases. Terry L.G. et al (1980) expressed that “The skills are essential if members have to work together efficiently in complex situations, only development of skills and relationships, involvement on the task regarding the particular task might be selected for reaching at target that is considered as a definition of a team”. Team often perform higher when they work together with sprit that enable them to achieve a collective goal at the workplace, it is not only benefits to the organization also affects the workers confidence and success. Cooperating on various tasks reduces workloads for all team members and enables them to share duties or ideas. Work as a team is the part of everyone's life, as one is a member of a family team, staff team, school team, and community teams etc., so as to understand how to work effectively as a team member. Especially there is a need when task is threatened with increasingly many problems for example; the energy problem has effects on organization, family life, and social development and the multi-dimensional nature of many problems require a scientific skill based problem solving approach. Terry L.G, et al (1980) expressed that “The skills, competencies and efforts of team by setting priorities the team can have better impact on the problems solving such efforts can reduce work load, work duplication, and produce a result better than separate efforts”. There are some processes of teamwork by adopting those the objectives can be achieved easily. Le Pine, et al, (2008) identified10 teamwork processes that fall in three categories following are those. TEAMWORK PROCESSES TRANSITION PROCESSES •Mission analysis •Goal specification •Strategy formulation ACTION PROCESSES •Monitoring progress toward goals •Systems monitoring •Team monitoring and backup behavior •Coordination INTERPERSONAL PROCESSES •Conflict management •Motivation and confidence building •Affect management Team Work 89 Teamwork process reduces the work stress on every member which permits members to complete given important task of organization; teamwork offers members an opening to pledge with each other. Also it develops relations between the members who start a teamwork they usually sense appreciated on productive accomplishment of task. It may be cited one of the best instances of surgical team; where surgeon is assisted by his team; nurses, anesthetist and experts etc., everyone knows that their success depends upon the teamwork. In addition they are devoted to the aim that is human life it is easy to succeed with best teamwork. The important role of manager is the team building, trust building, confidence building, in the team to achieve the task. In the Situation where all team members contribute the task, it develops the positive relationship in the team that improves the trust of team members.“Functions effectively members of team must be flexible, committed, trusting each other and help to each other’s in the progress and the achievement of goals” Expressed Plamínek (2008). The accountability of every member in the team must be increased so that they do not let each other down therefore they do their best for the achievements of their teams. In contrast, working alone on a task the pressure is generally high in team in those cases of small confidence impacts fewer on members. Team consists on members who always vary from each other’s in skills, knowledge and abilities but working together that is an opportunity for them to gain skills and knowledge from each other’s that they had never before. Working alone on a task is a challenge and using the ideas of each other brings them to come up with a mutual resolution and the achievement of the task. Nowadays theoretical development and research has rested largely a new trend that is emerging within the organizations as an essential process of teamwork. Teamwork has brought a new move in the research and development to the inputs and outputs that bound, constrain and impact on the team processes within organizations said Ilgen, D.R. (1999). The world is changes fast, any one set of instructions can’t be sufficient, changes needs flexible members, teams and organizations so as to be effective on task. This paper suggests that in teams members must use the exclusive human abilities. Cannon B.et al (1995) has précised dimensions of teams into three categories: Team dimensions 1-Cognitions: include associations, task team-mate characteristics, team mission, objectives, norms, and resources, team role interaction patterns, skills, roles, and team orientation. 2-Skills: consist on adaptability, shared situational awareness and mutual concept to conflict resolution. 90 The Government 3-Attitudes: symbolize motivation, collective potency, shared vision, team cohesion, mutual trust, collective orientation and importance of. Teamsize Researchers have given different approvals about the best size of team as Katzenbachetet al (1993) suggested that the teams should comprise on a dozen or so members which are enough to achieve a task. Although seven is the best size of the team in the organizational practices said Scharf, A. (1989). Several views of researchers are expressed in the literatures and it is difficult to decide which better is because their opinions are based on their own observations. The team size matters in the proper output and performance however from an empirical research it is also difficult to decide the suitable team size and what to accept. This study suggests that team size has a practical link with efficacy such as few or many member shave impact on the performance but size matters. Proper size of team improves the performance maximum stated Campion M. A et al (1996).These different results are expected due to the fact that appropriate team size is required for task, environment and situation where team works. However, larger teams can also experience coordination problems that delay performance. Sheppard, J. A. (1993) expressed that the question of best team’s size is a complex one; more research is required on this topic to explain the impact of team size on given definite task. Literature Review Across many different organizations and industries teamwork is focused to increase the performance of employees’ their unity and also create work culture. Organizations those regularly develop new ideas or products using a project-based approach and assemble teams in order to focus responsibilities to achieve the object. Researchers have given dissimilar meanings of “teams”. Dyer W.G. (2007) said that “teams are groups of people who trust in cooperation, if members are expert the success of goal is more possible”. It is essential due to the problemsolving cooperation added from many minds of team members working on a resolution of problems. Team members contribute their thoughts together to make exclusive plans for dealing with problems and this unity enhance the result due to interaction, trust and teamwork. Teamwork means a "work done by several companions with each doing a part but all subordinating personal prominence to the efficiency of the whole" Merriam, (2012). In addition combined employees are expected less hostile to each other and accepting more of each other’s decisions. Unity of employees can increase the flow of work in organization. When employee’s working together as a team, they learn from each other that awareness is based on their personal experiences and from coworkers; Team Work 91 employees from different departments may acquire knowledge from each other. The main object for organizations is to hold the team effort to achieve output and quality; team is a key to achieve quality productivity. According to Maddux et al (2003) “some of the organizations have major benefits from the use of teamwork which are showed in the following chart: Benefits of Teamwork 1 Improving quality of work life for employees 2 Reducing absenteeism and increasing turnover 3 Increasing innovation and change 4 Improving organizational adaptability and flexibility A real team is mostly one where members are allowed to take decisions that how to complete task. That authority enables them to control the work process, decreases the outside control and increases the sense of duty for work. Team always feels superiority on workplace and they rely on each other’s being there. Plamínek (2008) said that “affiliation with teamwork gives member a sense of belonging, interaction and recognition of success”. These actions support to remove the sense of loneliness of team member in organization. Effective teams can also improve efficacy through communication and trust between the team members, quality of work and decrease in absenteeism contribute to positive impact on team. Involving employees in teamwork helps the organization remain open to new ideas.“The world of organizations is shifting individualism is out and collectivism is in, power is out, empowerment is in.” stated G. M. Parker (1998). This study discovers the experiences and difficulties of teamwork that employees and organizations are facing nowadays due to big transformation and enlarged globalization. In recent years a remarkable amendment has been emerged in the belief of team working organizations. The modern study has explored that the scope of teamwork have been appeared in system rooted in belief, and employees accept changes that denoting a modern organizational system. The organizations which are responsive to the changes appear to achieve greater satisfaction. Although it may be suggested that, the managers should assess the values and beliefs of their employees to play more dedicated role in the development of organization by making sprit to face the modern challenges. Organizational cultural is much significant and it has the excessive impact on the performance of organization and employees’ but it is quiet arguable topic that the culture of teamwork can be developed according to the requirement. It is difficult to specify the relationships and to assess the reliable set of values to use as they believed symbol across the entire organizations. This review study focus that 92 The Government there is a great influence of organizational culture on the assumptions, values, and beliefs on the individuals’ considerations, actions and performances and so is vice versa, through learning, and training process. However the researchers believe that the organizational setup aids to unite employees of diverse cultures and dissimilar social backgrounds, traditions and have their own beliefs to work. Creating a positive teamwork culture it has several diverse aspects are goal setting, conflict resolution, empowerment, ability to accomplish tasks, measuring output and consideration for other teamwork cultures stated Pack L, et al April 27, (2012). Team work in the organization delivers employees the wisdom of unity; understand to each other’s, and reducing conflict. In addition teamwork in organization inspires employee for impartiality by affirming that no one is ignored in the organization and all treated equally. It is known that a team in organization is bound and sincere to work with dedication to bring the success. If the employees are committed and recognize the teamwork values and its benefits, as a part of the organization they can contribute a lot to the achievement of organization. One can finds the informal instances of team at these level, family, society, community, tribe and work groups etc., and formally team appears at the level of departments, functional groups, and other organizational units. The employees feel a greater sense of achievement for being a part of an organization, if they attain team work, having freedom to work not forced. The system gives best performance to achieve recognition and credit from their managers and it will increase their effort that helps them to contribute the organizational performance. Each team batter knows about their role and how to achieve tasks. The true spirit of teamwork gives benefit to organization in maintaining its standard by which it becomes identified. The team defines its specialty, and the way it is doing task that is perceived by the organization as well as its managers and it is secured by appreciation. Employees identify what they believe; that exist in their belief system and those understandings call them to change their views to develop and raise attention towards batter performance. The literature contains sufficient definitions of teamwork and the word team is used to denote a set of generally developed as to learn collective values, attitudes and cooperation to work. The study praises that the teamwork is mostly related with the team success for instance, Wagner (1995) described that “in the team individual is less valued and group is more valued, with”. It is found in the study that individualismcollectivism both regulates the relationships between team size, standing, and cooperation that have better effects on the cooperation of individualists rather than the cooperation of collectivists. Team Work 93 Conclusion The main concentration of this research paper is to examine more in-depth the fundamental of teamwork and its effectiveness to achieve the organizational goals. Teamwork provides vast amounts of knowledge and information, cultural differences each of these building a culture of teamwork and the skill to make the valuable solutions of the problems. To work efficiently, team members need a good understanding of how to do their job, to achieve goal and for that a basic way to ensure understanding is training, then they have to be motivated to do a job. Team is a vital activity of organization, when organization desires to perform sound it has to be confident that team functions effectively. Consequently it is compulsory to know how team performs, what manners within a team happen, and how they make decisions. If there is knowhow of teamwork events, it can be effective for the tasks that they have to accomplish. Organizations build up their own culture through tradition, history and structure these values can be accepted by team workers of an organization. The values and assumptions are the vital tools of organizations and are used as guidance for team. These have to do mostly with the basic dignity and worth of all members of team and the ability, necessity for them to solve the problems and work for the positive change. Through this review study is concluded that there is a good impact of teamwork on the organizations doings and success. Subsequently in recently developed literature there is a great focus amongst the social scientists and scholars’ in their discussion on the above topic teamwork. The above study is also an evidence of little effort to assess the significance of teamwork in organizations success. teams in organiz

THE FIDE LAWS OF CHESS. Introduction FIDE Laws of Chess cover over-the-board play. The Laws of Chess have two parts: 1. Basic Rules of Play and 2. Competitive Rules of Play. The English text is the authentic version of the Laws of Chess (which were adopted at the 93rd FIDE Congress at Chennai, India) coming into force on 1 January 2023. Preface. The Laws of Chess cannot cover all possible situations that may arise during a game, nor can they regulate all administrative questions. Where cases are not precisely regulated by an Article of the Laws, it should be possible to reach a correct decision by studying analogous situations which are regulated in the Laws. The Laws assume that arbiters have the necessary competence, sound judgement and absolute objectivity. Too detailed a rule might deprive the arbiter of his/her freedom of judgement and thus prevent him/her from finding a solution to a problem dictated by fairness, logic and special factors. FIDE appeals to all chess players and federations to accept this view. A necessary condition for a game to be rated by FIDE is that it shall be played according to the FIDE Laws of Chess. It is recommended that competitive games not rated by FIDE be played according to the FIDE Laws of Chess. Member federations may ask FIDE to give a ruling on matters relating to the Laws of Chess. BASIC RULES OF PLAY. Article 1: The Nature and Objectives of the Game of Chess 1.1 1.2 1.3 1.4 The game of chess is played between two opponents who move their pieces on a square board called a ‘chessboard’. The player with the light-coloured pieces (White) makes the first move, then the players move alternately, with the player with the dark-coloured pieces (Black) making the next move. A player is said to ‘have the move’ when his/her opponent’s move has been ‘made’. The objective of each player is to place the opponent’s king ‘under attack’ in such a way that the opponent has no legal move. 1.4.1 The player who achieves this goal is said to have ‘checkmated’ the opponent’s king and to have won the game. Leaving one’s own king under attack, exposing one’s own king to attack and also ’capturing’ the opponent’s king is not allowed. 1.4.2 The opponent whose king has been checkmated has lost the game. 1.5 If the position is such that neither player can possibly checkmate the opponent’s king, the game is drawn (see Article 5.2.2). Article 2: The Initial Position of the Pieces on the Chessboard 2.1 2.2 The chessboard is composed of an 8 x 8 grid of 64 equal squares alternately light (the ‘white’ squares) and dark (the ‘black’ squares). The chessboard is placed between the players in such a way that the near corner square to the right of the player is white. At the beginning of the game White has 16 light-coloured pieces (the ‘white’ pieces); Black has 16 dark-coloured pieces (the ‘black’ pieces). These pieces are as follows: A white king usually indicated by the symbol K A white queen Two white rooks Two white bishops Two white knights Eight white pawns A black king A black queen Two black rooks Two black bishops Two black knights Eight black pawns usually indicated by the symbol Q usually indicated by the symbol R usually indicated by the symbol B usually indicated by the symbol N usually indicated by the symbol usually indicated by the symbol K usually indicated by the symbol Q usually indicated by the symbol R usually indicated by the symbol B usually indicated by the symbol N usually indicated by the symbol Staunton Pieces p Q K B N R 9 2.3 The initial position of the pieces on the chessboard is as follows: 2.4 The eight vertical columns of squares are called ‘files’. The eight horizontal rows of squares are called ‘ranks’. A straight line of squares of the same colour, running from one edge of the board to an adjacent edge, is called a ‘diagonal’. Article 3: The Moves of the Pieces 3.1 It is not permitted to move a piece to a square occupied by a piece of the same colour. 3.1.1 If a piece moves to a square occupied by an opponent’s piece the latter is captured and removed from the chessboard as part of the same move. 3.1.2 A piece is said to attack an opponent’s piece if the piece could make a capture on that square according to Articles 3.2 to 3.8. 3.1.3 A piece is considered to attack a square even if this piece is constrained from moving to that square because it would then leave or place the king of its own colour under attack. 3.2 The bishop may move to any square along a diagonal on which it stands. 3.3 The rook may move to any square along the file or the rank on which it stands. 3.4 The queen may move to any square along the file, the rank or a diagonal on which it stands. 3.5 3.6 3.7 When making these moves, the bishop, rook or queen may not move over any intervening pieces. The knight may move to one of the squares nearest to that on which it stands but not on the same rank, file or diagonal. 3.7 When making these moves, the bishop, rook or queen may not move over any intervening pieces. The knight may move to one of the squares nearest to that on which it stands but not on the same rank, file or diagonal. The pawn: 3.7.1 The pawn may move forward to the square immediately in front of it on the same file, provided that this square is unoccupied, or 3.7.2 on its first move the pawn may move as in 3.7.1 or alternatively it may advance two squares along the same file, provided that both squares are unoccupied, or 3.7.3 the pawn may move to a square occupied by an opponent’s piece diagonally in front of it on an adjacent file, capturing that piece. 3.7.3.1 A pawn occupying a square on the same rank as and on an adjacent file to an opponent’s pawn which has just advanced two squares in one move from its original square may capture this opponent’s pawn as though the latter had been moved only one square. 3.7.3.2 This capture is only legal on the move following this advance and is called an ‘en passant’ capture. 3.7.3.3 When a player, having the move, plays a pawn to the rank furthest from its starting position, he/she must exchange that pawn as part of the same move for a new queen, rook, bishop or knight of the same colour on the intended square of arrival. This is called the square of ‘promotion’. 3.7.3.4 The player's choice is not restricted to pieces that have been captured previously. 3.7.3.5 This exchange of a pawn for another piece is called promotion, and the effect of the new piece is immediate. 3.8 There are two different ways of moving the king: 3.8.1 by moving to an adjoining square. 3.8.2 by ‘castling’. This is a move of the king and either rook of the same colour along the player’s first rank, counting as a single move of the king and executed as follows: the king is transferred from its original square two squares towards the rook on its original square, then that rook is transferred to the square the king has just crossed. 3.8.2.1 The right to castle has been lost: 3.8.2.1.1 If the king has already moved, or 3.8.2.1.2 With a rook that has already moved. 3.8.2.2 Castling is prevented temporarily: 3.8.2.2.1 if the square on which the king stands, or the square which it must cross, or the square which it is to occupy, is attacked by one or more of the opponent's pieces, or 3.8.2.2.2 if there is any piece between the king and the rook with which castling is to be effected. 3.9 The king in check: 3.9.1 The king is said to be 'in check' if it is attacked by one or more of the opponent's pieces, even if such pieces are constrained from moving to the square occupied by the king because they would then leave or place their own king in check. 3.9.2 No piece can be moved that will either expose the king of the same colour to check or leave that king in check. 3.10 Legal and illegal moves; illegal positions: 3.10.1 A move is legal when all the relevant requirements of Articles 3.1 – 3.9 have been fulfilled. 3.10.2 A move is illegal when it fails to meet the relevant requirements of Articles 3.1 –3.9. 3.10.3 A position is illegal when it cannot have been reached by any series of legal moves. Article 4: The Act of Moving the Pieces 4.1 4.2 Each move must be played with one hand only. Adjusting the pieces or other physical contact with a piece: 4.2.1 Only the player having the move may adjust one or more pieces on their squares, provided that he/she first expresses his/her intention (for example by saying “j’adoube” or “I adjust”). 4.2.2 Any other physical contact with a piece, except for clearly accidental contact, shall be considered to be intent. 4.3 Except as provided in Article 4.2.1, if the player having the move touches on the chessboard, with the intention of moving or capturing: 4.3.1 one or more of his/her own pieces, he/she must move the first piece touched that can be moved. 4.3.2 one or more of his/her opponent’s pieces, he/she must capture the first piece touched that can be captured. 4.3.3 one or more pieces of each colour, he/she must capture the first touched opponent’s piece with his/her first touched piece or, if this is illegal, move or capture the first piece touched that can be moved or captured. If it is unclear whether the player’s own piece or his/her opponent’s was touched first, the player’s own piece shall be considered to have been touched before his/her opponent’s. 4.4 If a player having the move: 4.4.1 touches his/her king and a rook he/she must castle on that side if it is legal to do so 4.4.2 deliberately touches a rook and then his/her king he/she is not allowed to castle on that side on that move and the situation shall be governed by Article 4.3.1. 4.4.3 intending to castle, touches the king and then a rook, but castling with this rook is illegal, the player must make another legal move with his/her king (which may include castling with the other rook). If the king has no legal move, the player is free to make any legal move. 4.4.4 promotes a pawn, the choice of the piece is finalised when the piece has touched the square of promotion. 4.5 4.6 If none of the pieces touched in accordance with Article 4.3 or Article 4.4 can be moved or captured, the player may make any legal move. The act of promotion may be performed in various ways: 4.6.1 the pawn does not have to be placed on the square of arrival. 4.6.2 removing the pawn and putting the new piece on the square of promotion may occur in any order. 4.6.3 If an opponent’s piece stands on the square of promotion, it must be captured. 4.7 When, as a legal move or part of a legal move, a piece has been released on a square, it cannot be moved to another square on this move. The move is considered to have been made in the case of: 4.7.1 A capture, when the captured piece has been removed from the chessboard and the player, having placed his/her own piece on its new square, has released this capturing piece from his/her hand. 4.7.2 Castling, when the player's hand has released the rook on the square previously crossed by the king. When the player has released the king from his/her hand, the move is not yet made, but the player no longer has the right to make any move other than castling on that side, if this is legal. If castling on this side is illegal, the player must make another legal move with his/her king (which may include castling with the other rook). If the king has no legal move, the player is free to make any legal move. 4.7.3 Promotion, when the player's hand has released the new piece on the square of promotion and the pawn has been removed from the board. 4.8 4.9 A player forfeits his/her right to claim against his/her opponent’s violation of Articles 4.1 – 4.7 once the player touches a piece with the intention of moving or capturing it. 4.8. A player forfeits his/her right to claim against his/her opponent’s violation of Articles 4.1 – 4.7 .4.9. If a player is unable to move the pieces, an assistant, who shall be acceptable to the arbiter, may be provided by the player to perform this operation. Article 5: The Completion of the Game 5.1.1 The game is won by the player who has checkmated his/her opponent’s king. This immediately ends the game, provided that the move producing the checkmate position was in accordance with Article 3 and Articles 4.2 – 4.7. 5.1.2 The game is lost by the player who declares he/she resigns (this immediately ends the game), unless the position is such that the opponent cannot checkmate the player’s king by any possible series of legal moves. In this case the result of the game is a draw. 5.2.1 The game is drawn when the player to move has no legal move and his/her king is not in check. The game is said to end in ‘stalemate’. This immediately ends the game, provided that the move producing the stalemate position was in accordance with Article 3 and Articles 4.2 – 4.7. 5.2.2 The game is drawn when a position has arisen in which neither player can checkmate the opponent’s king with any series of legal moves. The game is said to end in a ‘dead position’. This immediately ends the game, provided that the move producing the position was in accordance with Article 3 and Articles 4.2 – 4.7. 5.2.3 The game is drawn upon agreement between the two players during the game, provided both players have made at least one move. This immediately ends the game. COMPETITIVE RULES OF PLAY Article 6: The Chessclock 6.1 ‘Chessclock’ means a clock with two time displays, connected to each other in such a way that only one of them can run at a time. ‘Clock’ in the Laws of Chess means one of the two time displays. Each time display has a ‘flag’. ‘Flag-fall’ means the expiration of the allotted time for a player. 6.2 Handling the chessclock: 6.2.1 During the game each player, having made his/her move on the chessboard, shall pause his/her own clock and start his/her opponent’s clock (that is to say, he/she shall press his/her clock). This “completes” the move. A move is also completed if: 6.2.1.1 6.2.1.2 the move ends the game (see Articles 5.1.1, 5.2.1, 5.2.2, 9.2.1, 9.6.1 and 9.6.2), or the player has made his/her next move, when his/her previous move was not completed. 6.2.2 A player must be allowed to pause his/her clock after making his/her move, even after the opponent has made his/her next move. The time between making the move on the chessboard and pressing the clock is regarded as part of the time allotted to the player. 6.2.3 A player must press his/her clock with the same hand with which he/she made his/her move. It is forbidden for a player to keep his/her finger on the clock or to ‘hover’ over it. 6.2.4 The players must handle the chessclock properly. It is forbidden to press it forcibly, to pick it up, to press the clock before moving or to knock it over. Improper clock handling shall be penalised in accordance with Article 12.9. 6.2.5 6.2.6 Only the player whose clock is running is allowed to adjust the pieces. If a player is unable to use the clock, an assistant, who must be acceptable to the arbiter, may be provided by the player to perform this operation. His/Her clock shall be adjusted by the arbiter in an equitable way. This adjustment of the clock shall not apply to the clock of a player with a disability. 6.3 Allotted time: 6.3.1 When using a chessclock, each player must complete a minimum number of moves or all moves in an allotted period of time including any additional amount of time added with each move. All these must be specified in advance. 6.3.2 The time saved by a player during one period is added to his/her time available for the next period, where applicable. In the time-delay mode both players receive an allotted ‘main thinking time’. Each player also receives a ‘fixed extra time’ with every move. The countdown of the main thinking time only commences after the fixed extra time has expired. Provided the player presses his/her clock before the expiration of the fixed extra time, the main thinking time does not change, irrespective of the proportion of the fixed extra time used. 6.4 Immediately after a flag falls, the requirements of Article 6.3.1 must be checked. 6.5 Before the start of the game the arbiter shall decide where the chessclock is placed. 6.6 At the time determined for the start of the game White’s clock is started.6.7. Default time: 6.7.1 The regulations of an event shall specify a default time in advance. If the default time is not specified, then it is zero. Any player who arrives at the chessboard after the default time shall lose the game unless the arbiter decides otherwise. 6.7.2 If the regulations of an event specify that the default time is not zero and if neither player is present initially, White shall lose all the time that elapses until he/she arrives, unless the regulations of an event specify, or the arbiter decides otherwise. 6.8 A flag is considered to have fallen when the arbiter observes the fact or when either player has made a valid claim to that effect. 6.9 Except where one of Articles 5.1.1, 5.1.2, 5.2.1, 5.2.2, 5.2.3 applies, if a player does not complete the prescribed number of moves in the allotted time, the game is lost by that player. However, the game is drawn if the position is such that the opponent cannot checkmate the player’s king by any possible series of legal moves. 6.10 Chessclock setting: 6.10.1 Every indication given by the chessclock is considered to be conclusive in the absence of any evident defect. A chessclock with an evident defect shall be replaced by the arbiter, who shall use his/her best judgement when determining the times to be shown on the replacement chessclock. 6.10.2 If during a game it is found that the setting of either or both clocks is incorrect, either player or the arbiter shall pause the chessclock immediately. The arbiter shall install the correct setting and adjust the times and move-counter, if necessary he/she shall use his/her best judgement when determining the clock settings. 6.11.1 If the game needs to be interrupted, the arbiter shall pause the chessclock. 6.11.2 A player may pause the chessclock only in order to seek the arbiter’s assistance, for example when promotion has taken place and the piece required is not available. 6.11.3 The arbiter shall decide when the game restarts. 6.11.4 If a player pauses the chessclock in order to seek the arbiter’s assistance, the arbiter shall determine whether the player had any valid reason for doing so. If the player has no valid reason for pausing the chessclock, the player shall be penalised in accordance with Article 12.9. 6.12.1 Screens, monitors, or demonstration boards showing the current position on the chessboard, the moves and the number of moves made/completed, and clocks which also show the number of moves, are allowed in the playing hall. 6.12.2 The player may not make a claim relying only on information shown in this manner.

• Agriculture is growing of crops and keeping of animals. • People who practice agriculture are called farmers. • Agriculture is very important to the family. Benefits to the family • It provides food. • It provides money. • Agriculture gives us medicine. • It provides jobs. • Agriculture gives us transport and power. • It helps most families become self sufficient. • Farm tools are instruments used on farms to make work easier. • They are usually handheld and are used frequently when practicing agricultural activities. • Farm tools are light in weight, easy to handle and are suited to the strength of the farmer Name of tool Picture Use Watering can For fine watering of seed beds bucket Carrying manure, fertilizer,seed and ripe crops Name of tool Picture Use Sickle Cutting grass and harvesting of cereals like rice and wheat Slasher Cutting down tall grass and weeds USES OF FARM TOOLS Name of tool Picture Use Garden trowel Transplanting seedlings and making planting holes Hand fork Shallow cultivation of soil Aerating the soil USES OF FARM TOOLS Name of tool Picture Use Shovel Loading and offloading soil or manure into a wheelbarrow, scotch cart or truck Spade Digging and turning over of moist soil USES OF FARM TOOLS Name of tool Picture Use Garden fork Loosening and turn soil Garden line Marking straight ridges and garden beds USES OF FARM TOOLS Name of tool Picture Use wheelbarrow Moving items around the farm Items such as soil, mulch, animal feed. Etc Knapsack sprayer Spraying pesticides and herbicides Spraying fertilizers on crops. • An inventory is a record of the things that you have. • This is a list of tools issued out and tools received back and from whom Inventory of farm tools Inventory record sheets Created by Date Name of tool Sheet Tool numbenumber Description r Location Quantity Spade 1/15 Black,wooden handle Store room 2 SAFETY IN AGRICULTURE • Agricultural activities can be dangerous. • Hazards involved results in injury, disability and death of people and animals. • The hazards are usually caused by physical injury and chemical poisoning. Common hazards in Agriculture 1. physical injury These include: • Injury caused by accidents during use of farm tools, equipment and machinery. • Misuse and improper storage of farm tools and equipment. • Being kicked by animals. • Drowning in farm pond, pool or dam. Common hazards in Agriculture 2 . Chemical poisoning These include: • Spraying without protective clothing. • Eating or smoking when spraying chemicals. • Dumping toxic chemical left overs on land and in water. • Eating agriculture produces without prior permission from adults. • Pesticides, herbicides and fertilizers pollute water sources and kill animals. Chemical poisoning Ways of preventing common agricultural hazards 1. Wear protective clothing such as gloves, gumboots, respirator, hat and overalls. 2. Do not eat, drink or smoke when spraying. 3. Dispose off all chemical remains safely. 4. Bury or burn empty chemical containers and chemical left overs. 5. Wash thoroughly with running water and soap after using chemicals. 6. Do not spray during windy days. 7. Handle tools the right way. 8. Fence farm ponds and dams. Ways of preventing common agricultural hazards Climate and Landuse Seasons of Zimbabwe Seasons of Zimbabwe Definition of terms • A season is a time of the year with almost the same weather patterns. • Weather is the state of the atmosphere at a particular time at a particular place. • it is the daily condition of air around us. • Seasons are determined by rainfall and temperature. Seasons of Zimbabwe • There are four seasons in Zimbabwe , which are: 1.The rain season 2.Post rain season 3.Cool dry season 4.Hot dry season Seasons of Zimbabwe 1.The rain season ( summer) • It is also called the hot- wet season. • The season begins in mid November to mid March. • The period is rainy and hot. • Dams and rivers fill up. Seasons of Zimbabwe 2 . The post rain season ( autumn ) • It starts mid March – May • The days are bright and sunny. • The leaves change from green to red, orange, yellow or brown before falling. • In addition, there is less sunlight because the days are shorter. • It is the harvesting period of most crops. Seasons of Zimbabwe 3. The cold dry season ( winter ) • It begins mid May – mid August • The mornings, evenings and nights are very cold. • Has short days and long nights. Seasons of Zimbabwe 4 . The hot season (spring ) • It begins mid August – mid November. • The days are very hot with cool nights. • A season for trees to develop new shoots. Summer Activities Agricultural activities done during the rain season includes: • Ploughing and planting of summer crops for example maize, cotton. • Weeding • Pest and disease control • Applying fertilizers. • Weekly dipping of animals because ticks, lice and mites would be many. • Harvesting of summer crops • Preparing fireguards. A fireguard is a fire break. • Beginning of the planting of wheat, barley and oats. Winter Activities • Planting of winter crops such as wheat, barley and oats. • Harvesting and selling of summer crops continues. • Constructing frost barriers for frost sensitive crops such as tomatoes. • Vaccinating animals against blackleg. • Supplementary feeding of grazing animals. • Dosing of animals to kill internal parasites. Spring Activities • Shelling and threshing of grain crops. • Dry planting of summer crops. • Carrying manure to fields. • Ploughing and harrowing. • Making planting holes Soil Components •Soil is made up of 4 components: 1)Mineral matter 2)Organic matter 3)Soil water 4)Soil air

Related quizzes

Related quizzes