Preventative maintenance includes all ofthese EXCEPT ________.

When should the engine oil be replaced?

Which of these should be used when preparing a vehicle for service?

Routine service includes ________.

Which of these conditions must be metbefore checking the fluid level in an automatic transmission?

Coolant can be checked using ________.

Accessory drive belt tension is determined by ________.

What inflation pressure specifications should be used when checking or correcting tire pressure?

The use of diesel exhaust fluid (DEF) ina vehicle equipped with a diesel engine is used to reduce ________ emissions.

A service technician removed the inspection/fill plug from the differential of a rear-wheel drive vehicle and gear lube started to flow out. Technician A says that the technician should quickly replace the plug to prevent any more loss of gear lube. Technician B says to catch the fluid and allow the fluid to continue to drain. Which technician is correct?

The cabin filter can be accessed from________.

Technician A says that most manufacturers specify replacement of the air filter every 30,000 miles. Technician B says that the air filter should be replaced every year. Which technician is correct?

Technician A says that the metal brake fluid reservoir found on older vehicles requires the top to be removed to check fluid level. Technician B says that when filling a brake fluid reservoir to leave room for expansion due to heat. Which technician is correct?

Polyglycol brake fluid ________.

Before draining a manual transmission to replace the fluid, what should the technician do first?

DOT 3 brake fluid can absorb ________ of its volume of water per year.

DOT 4 brake fluid ________.

A grease labeled NLGI #2 GC is suitable for use on what vehicle components?

DOT 5 brake fluid ________.

Which of these brake fluids has the highest boiling point?

Engine oil level should be checked________.

Technician A says to never open the cooling system when the coolant is hot. Technician B says to periodically inspect the radiator for obstructions. Which technician is correct?

When servicing a hybrid vehicle, the technician must make sure that he/she has the ________ and the vehicle is NOT in the ready mode.

Where is the correct tire pressure specification found?

Windshield wiper blades are constructed of ________ and tend to become brittle due to age.

Windshield washer fluid looks like blue water and is actually water mixed with ________ to prevent freezing and to help clean the windshield.

Tires should be inflated to the pressure marked on the tire sidewall.

A good lubricant should be used whenever installing lug nuts.

If the vehicle calls for DOT 3 brake fluid then DOT 5 fluid will provide even better performance.

Checking automatic transmission fluid level is easy, since they all have a dipstick.

One type of power steering fluid is generally used for all vehicles.