A short block includes the ________. 

Technician A says that a minor overhaul can often be done with the engine remaining in the vehicle.

Technician B says that a core is required for most remanufactured engines. Which technician is correct? 

When removing the engine only from a vehicle equipped with an automatic transmission, the torque converter normally ________. 

When removing cylinder heads, the fasteners should be removed in what order?

A) The same order as the specified tightening sequence 

With the rocker cover (valve cover) removed, the technician can inspect all items EXCEPT ________. 

What needs to be removed before the valves can be removed from the cylinder head? 

After the oil pan is removed, the technician should inspect ________. 

The ridge at the top of the cylinder ________. 

Before the timing chain can be inspected and removed, the ________ must be removed. 

Before the valves are removed from the cylinder head, what operations need to be completed? 

Technician A says that lifting hooks should be used when hoisting an engine. Technician B says that engine component parts should only be removed when the engine is at operating temperature. Who is right? 

Technician A says that the connecting rod and main bearing caps should be marked before removing to ensure that they can be reinstalled in the exact same location when re-assembled. Technician B says that the tip of the valve stem should be filed before removing valves from the cylinder head to help prevent damage to the valve guide. Who is right? 

A long block can be made from a short block with the addition of ________. 

Technician A says that before removing the engine, the battery should be disconnected. Technician B says to assist in reassembly, you should mark all unfamiliar hoses and wires in the engine compartment. Who is right? 

Before removing the piston and rod assembly from the cylinder block, you should do all of these, EXCEPT ________. 

Technician A says that a minor overhaul includes performing a valve job. Technician B says that a minor overhaul includes replacing the pistons. Which technician is correct? 

Powdered connecting rods can be marked with ________. 

Cylinder head bolts should be loosened ________. 

A valve job restores the valves and seats. This increases manifold vacuum and may cause ________. 

If the AC system needs to be disconnected, carefully bleed off the refrigerant before removing any lines.