Meats Review | Quizalize

Fruits, Vegetables, Meats, Dairy, and Grains Review

Fruits, Vegetables, Meats, Dairy, Grains Review

7.015 Hand Hygiene: Practice observation of hand hygiene compliance via the use of a hand hygiene survey tool to be reviewed quarterly at the QAPI committee. (Chapter 10.14 Handwashing & Surgical Antisepsis) Continue infection control education through ongoing orientation to center staff routinely and annual mandatory in-service. Continue to promote hand hygiene awareness for patients and staff by means of educational materials placed throughout the center which references the CDC/WHO guidelines. Needle-stick Injuries: (Refer to Exposure Control Plan) Use of designated safety engineered needles for injections (safety glide needles for injection and autoguard IV catheters) and blood draw. New employee and annual clinical competency for injections will be provided to all staff. The staff will be trained yearly on OSHA, blood borne pathogens and PPE. 7.016 Hand Hygiene Quality in the ASCs: based on AORN (Association of periOperative Registered Nurses) Standards and guidelines Policy: All ASC staff, including physicians, nurses, and other healthcare workers, are required to perform hand hygiene before and after any direct contact with patients, before and after any procedure, and after any contact with potentially contaminated items or surfaces. Hand hygiene must be performed using either an alcohol-based hand rub or soap and water. The alcohol-based hand rub must contain at least 60% alcohol. Staff members must ensure that their hands are free of debris and visible dirt before performing hand hygiene. Hand hygiene must be performed for a minimum of 20 seconds, and hands must be dried thoroughly after washing. Staff members must be trained on proper hand hygiene techniques and will be educated on a regular basis to ensure compliance with this policy. All staff members must comply with this policy and demonstrate compliance during inspections by ASC management and regulatory agencies. Any staff member who fails to comply with this policy will be subject to disciplinary action. ASC management will monitor compliance with this policy through regular inspections and audits and will take appropriate action to address any noncompliance issues. The ASC will maintain records of staff compliance with this policy as part of its infection control program. The ASC will review and update this policy on an annual basis or more frequently as needed to ensure that it remains current with the latest guidelines and standards for hand hygiene quality.

Create a vocabulary quiz for 10th grade EFL students at CEFR B1 level. For example: adequate means: 1. sufficient 2. more and more 3. not enough. Use all the vocabulary below and provide accompanying definitions per the example to create this vocabulary quiz. The vocabulary quiz must contain at least 226 questions including the following vocabulary: addition advance advanced advertising among other things analysis appear approach as at least average be responsible for something be responsible for doing something before besides can challenge chance change characteristic claim come after come first come last common complicated concern conditions conduct consequence considerable cope critic current decrease delayed deliberately demonstrate design destruction development disagreement disaster discovery dislike do doubt drop educate efficient emphasis enjoyable essay essentially even if even though event exactly except that exist extraordinary feature feedback figure financial finding findings flexible flood flu focus on somebody or something focus frequent fresh frighten from gain generate guidance hopefully ideal illness illustrate image in terms of something in actual fact in connection with something in that case in the meantime initial instruction intelligence interest introduce invest investigate just about just about keep on doing something kind of knowledge lack landscape likely limited little look at something low material mean means measure mention miss misunderstand more or less must naturally nature necessarily nevertheless not at all not only notice objective occasional official on the one hand on the other hand once others otherwise out of date participate particular past perform personality personally planet planning plant point of view policy pollution popular population prevent priority private probable produce profession professor proof proposed protest provided (that) psychology public purpose quality question question questionnaire react reasonable recommend recycle regard region regular relevant reliable rely on/upon sb/sth request research result review revise risk run out of rural salary sample seldom sense set up sth or set sth up significant skilled slight specialist specific still structure study supposed surface take advantage of sth thanks to somebody or something theory throw away throw out something throw something away throw out transport trash treatment unfortunately unhealthy unique united universe unknown unlike unlikely urban vary view visible vision volume whom wildlife within worthwhile would additional analyze analyst appearance on average change characterize complicate concerned concerning concerned with something consequently cope with something criticize criticism currently deliberate demonstration designer developing developed educated educator efficiency efficiently emphasize enjoyment existence existing figure out something finance flexibility frequency hopeful illustration initially intelligent interested in something investor investment investigation investigator limitation meaning occasionally old-fashioned participant participation particularly performance planned pollute prevention producer professional psychological psychologist publicly reaction reasonably recommendation regardless regarding regional relevance researcher resulting revision sensible set out something set something out significantly significance skillful slightly specialize specifically specify theoretical transportation unfortunate unity unite universal variation viewer

Exams can be a source of stress and anxiety for many students, but there are ways to prepare and cope with the pressure. One important step is to start studying well in advance and break down the material into manageable chunks. This can be done by creating a study schedule and setting specific goals for each study session. Another key aspect of exam preparation is revision. This means going over your notes, practicing test-taking skills, and reviewing any areas where you may be struggling. It's also important to take care of yourself both physically and mentally. This includes getting enough sleep, eating a healthy diet, and engaging in regular exercise. Additionally, it's crucial to manage stress levels, using techniques such as deep breathing and meditation can help. On the day of the exam, it's important to stay calm and focused. This can be achieved by getting to the exam location early, so you can settle in before the test starts. Also, try to avoid cramming last-minute studying, it's better to relax and review your notes before the exam. Lastly, after the exam, try not to dwell on your performance, focus on the things you did well and the progress you've made. Remember that exams are just one aspect of your education and shouldn't define your self-worth.

I. Introduction: A. Welcome and Purpose of Training Welcome to the ABA Clinic Fire and Evacuation Safety Training. The purpose of this training is to ensure the safety and well-being of everyone in the clinic by preparing staff for effective response to fire emergencies and evacuation situations. B. Importance of Evacuation and Fire Safety Understanding the gravity of evacuation and fire safety is paramount. Compliance with safety standards not only meets regulatory requirements but also safeguards the lives of our clients, staff, and visitors. II. Overview of Fire Safety Standards: A. Explanation of Relevant Fire Safety Codes and Standards Our clinic strictly adheres to [Insert Relevant Fire Safety Codes and Standards], including guidelines from the National Fire Protection Association (NFPA) and local fire authorities. Familiarity with these standards is essential for maintaining a safe environment. B. Importance of Compliance Compliance with fire safety standards is a commitment to the well-being of our community. It sets the foundation for a secure and prepared clinic, ensuring a proactive approach to fire safety. III. Fire Prevention Measures: A. Identifying Fire Hazards in the Clinic Regular inspections, conducted quarterly, will identify potential fire hazards, including faulty wiring, overheating equipment, or improperly stored flammable materials. Staff is encouraged to report any potential hazards immediately. B. Proper Storage of Flammable Materials Flammable materials are stored in designated areas equipped with fire-resistant cabinets and safety measures. These areas are clearly marked, and staff is trained on proper storage procedures. C. Electrical Safety Tips Staff is trained to recognize and report any electrical issues promptly. Furthermore, electrical equipment undergoes regular maintenance checks to prevent electrical fires. D. Smoking Policy Smoking is strictly prohibited within the clinic premises. Designated smoking areas, equipped with fire-resistant receptacles, are provided outside the building, ensuring compliance with safety regulations. IV. Emergency Communication: A. Overview of Communication Systems Our clinic utilizes a robust communication system, including intercoms and a mass notification system, to relay emergency information promptly to all staff members. B. Designation of Emergency Contacts Emergency contact information for all staff members is regularly updated. Designated individuals are responsible for initiating emergency communication and ensuring all staff are informed. C. Internal Communication Protocols Clear internal communication protocols are established, outlining the chain of command and communication channels during emergency situations. Staff members are familiarized with these protocols during onboarding. V. Evacuation Procedures: A. Evacuation Routes Evacuation routes are clearly marked throughout the clinic, indicating the shortest and safest paths to exit points. These routes are reviewed annually and updated as needed. B. Emergency Exits and Assembly Points Staff is familiarized with the location of emergency exits and assembly points during regular drills. These drills, conducted quarterly, ensure that all staff are well-practiced in evacuation procedures. C. Evacuation Drills Evacuation drills are conducted quarterly, simulating various emergency scenarios. These drills include scenarios involving individuals with special needs, ensuring staff are equipped to assist everyone during evacuations. D. Assistance for Individuals with Special Needs Staff members receive specialized training on providing assistance to individuals with special needs during evacuations. This includes utilizing evacuation chairs, providing verbal guidance, and ensuring a calm and supportive approach. VI. Fire Extinguisher Training: A. Types of Fire Extinguishers Staff is trained on the different types of fire extinguishers available in the clinic, including ABC and CO2 extinguishers. Training includes recognizing the appropriate use for each type. B. Proper Use and Handling Hands-on demonstrations are provided to staff, allowing them to practice the proper use and handling of fire extinguishers. Emphasis is placed on safety precautions, including maintaining a safe distance and using the PASS method (Pull, Aim, Squeeze, Sweep). C. Location of Fire Extinguishers in the Clinic A map indicating the locations of all fire extinguishers is prominently displayed throughout the clinic. Staff is familiarized with these locations during training sessions. VII. Emergency Response Team: A. Designation of Emergency Response Team Members An Emergency Response Team is designated, comprising individuals from different departments. Team members receive specialized training and are identified by distinctive vests during emergencies. B. Roles and Responsibilities Clear roles and responsibilities for Emergency Response Team members are outlined in the Emergency Response Plan. This includes responsibilities such as assisting with evacuations, providing first aid, and coordinating with emergency services. C. Training for First Aid and CPR Emergency Response Team members receive regular training in first aid and CPR. Training sessions are conducted semi-annually to ensure team members are proficient in life- saving techniques. VIII. Mock Scenarios: A. Conducting Simulated Fire Drills Simulated fire drills are conducted quarterly, involving all staff members. These drills include various fire scenarios, such as small fires, smoke-filled areas, and evacuations of different areas within the clinic. B. Addressing Various Emergency Scenarios Staff members engage in discussions and practical exercises addressing various emergency scenarios, fostering a proactive mindset. Scenarios include power outages, medical emergencies, and coordination with external emergency services. C. Feedback and Improvement Strategies Feedback from drills is collected and analyzed to identify areas for improvement. Regular meetings are held to discuss feedback and implement necessary changes to enhance emergency response strategies. IX. Documentation and Record-Keeping: A. Importance of Documentation Accurate and detailed documentation of all safety-related activities is maintained, including inspection reports, drill records, and incident reports. This documentation is crucial for compliance and continuous improvement. B. Incident Reporting Procedures Staff is trained on the proper procedures for reporting incidents. Incident reports include details such as the nature of the incident, individuals involved, and actions taken. A designated individual reviews and addresses incident reports promptly. C. Regular Audits and Reviews Regular audits and reviews of safety procedures are conducted annually by an external safety consultant. This ensures that the clinic's safety protocols align with the latest standards and identifies areas for continuous improveme

Generate exact multiple choice questions as give below 1. **Which round of negotiations led to the establishment of the World Trade Organization (WTO)?** - (a) Doha Round - (b) Tokyo Round - (c) Uruguay Round - (d) Kennedy Round **Answer:** (c) Uruguay Round 2. **The General Agreement on Tariffs and Trade (GATT) dealt with:** - (a) Goods only - (b) Services only - (c) Intellectual property only - (d) All of the above **Answer:** (a) Goods only 3. **The 'National Treatment' principle means:** - (a) Exported products are treated equally in the domestic market - (b) Imported goods are treated the same as local goods in the domestic market - (c) Exported products should have the same tariff - (d) None of the above **Answer:** (b) Imported goods are treated the same as local goods in the domestic market 4. **'Bound tariff' refers to:** - (a) A limit on tariffs for imports based on WTO commitments - (b) The tax rate on all exports - (c) The overall cost of tariffs - (d) A tariff-free trade condition **Answer:** (a) A limit on tariffs for imports based on WTO commitments 5. **The Most-Favoured Nation (MFN) principle ensures:** - (a) Equal treatment for all WTO members - (b) Only certain countries receive benefits - (c) Tariffs are raised annually - (d) One country is favored over others **Answer:** (a) Equal treatment for all WTO members 6. **The Agreement on Agriculture includes commitments in:** - (a) Market access, domestic support, and export subsidies - (b) Increasing crop yield and technology access - (c) Subsidizing imports only - (d) Agricultural tariffs only **Answer:** (a) Market access, domestic support, and export subsidies 7. **Which agreement replaced the Multi-Fiber Arrangement (MFA)?** - (a) Agreement on Textiles and Clothing - (b) Agreement on Agriculture - (c) TRIPS Agreement - (d) Technical Barriers to Trade Agreement **Answer:** (a) Agreement on Textiles and Clothing 8. **The WTO's TRIPS Agreement pertains to:** - (a) Agricultural products - (b) Intellectual property rights - (c) Investment measures - (d) Customs valuation **Answer:** (b) Intellectual property rights 9. **The Doha Round primarily focuses on:** - (a) Tariffs on manufactured goods - (b) Trade in agricultural goods - (c) Technology trade - (d) Intellectual property in medicine **Answer:** (b) Trade in agricultural goods 10. **The WTO aims to:** - (a) Restrict all trade - (b) Facilitate free and fair trade - (c) Promote monopoly - (d) Limit member negotiations **Answer:** (b) Facilitate free and fair trade 11. **RTAs aim to:** - (a) Block international trade - (b) Reduce trade barriers within a group of countries - (c) Increase tariffs among members - (d) Promote non-trade-related policies **Answer:** (b) Reduce trade barriers within a group of countries 12. **Customs unions require members to:** - (a) Keep individual external tariffs - (b) Impose the same external tariff on non-members - (c) Remove tariffs only temporarily - (d) Avoid any tariffs within the union **Answer:** (b) Impose the same external tariff on non-members 13. **The WTO's highest decision-making body is:** - (a) General Council - (b) Ministerial Conference - (c) TRIPS Council - (d) Dispute Settlement Body **Answer:** (b) Ministerial Conference 14. **Which principle prevents discrimination between WTO members?** - (a) MFN - (b) National Treatment - (c) Market Access - (d) Subsidy Reduction **Answer:** (a) MFN 15. **A common market involves:** - (a) A shared currency - (b) Free movement of goods, services, and factors of production - (c) Only trade agreements for goods - (d) No tariffs on agriculture **Answer:** (b) Free movement of goods, services, and factors of production 16. **The Agreement on Subsidies and Countervailing Measures addresses:** - (a) Trade in textiles - (b) Subsidies that distort trade - (c) All intellectual property laws - (d) Agricultural trade only **Answer:** (b) Subsidies that distort trade 17. **The WTO's TRIMs Agreement regulates:** - (a) Investments - (b) Trade in goods - (c) Trade in services - (d) Agricultural products **Answer:** (a) Investments 18. **The primary goal of the WTO's SPS Agreement is:** - (a) To allow subsidies on food exports - (b) To prevent arbitrary sanitary restrictions on trade - (c) To regulate intellectual property - (d) To impose environmental standards **Answer:** (b) To prevent arbitrary sanitary restrictions on trade 19. **A trading bloc is:** - (a) A group of countries with no trade agreements - (b) A group of countries that may have a common external tariff - (c) Only formed by countries from the same continent - (d) An agreement that restricts all trade **Answer:** (b) A group of countries that may have a common external tariff 20. **The GATT was succeeded by the WTO because:** - (a) GATT was only for developed countries - (b) WTO covers more areas like services and intellectual property - (c) GATT was non-binding - (d) WTO allows subsidies for agriculture **Answer:** (b) WTO covers more areas like services and intellectual property Certainly! Here are an additional 30 multiple-choice questions based on the document content, with answers provided after each question. --- ### Additional Questions and Answers 21. **The WTO’s Agreement on Technical Barriers to Trade (TBT) seeks to:** - (a) Restrict imports to a minimum - (b) Prevent standards from becoming unnecessary trade barriers - (c) Allow countries to set any standard for goods - (d) Promote only national standards for products **Answer:** (b) Prevent standards from becoming unnecessary trade barriers 22. **The Trade Policy Review Mechanism (TPRM) is designed to:** - (a) Impose tariffs on certain goods - (b) Regularly review and assess national trade policies - (c) Regulate customs duties globally - (d) Control intellectual property rights **Answer:** (b) Regularly review and assess national trade policies 23. **The principle of “progressive liberalization” means that:** - (a) Trade barriers are reduced gradually over time - (b) All tariffs are removed immediately - (c) Only developed countries reduce trade barriers - (d) No commitments are required from developing countries **Answer:** (a) Trade barriers are reduced gradually over time 24. **Which council oversees the Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS)?** - (a) General Council - (b) Services Council - (c) TRIPS Council - (d) Agriculture Council **Answer:** (c) TRIPS Council 25. **The WTO’s 'Dispute Settlement Body' is responsible for:** - (a) Deciding on national trade policies - (b) Settling trade disputes between member countries - (c) Creating new trade agreements - (d) Setting tariffs for member countries **Answer:** (b) Settling trade disputes between member countries 26. **A customs union differs from a free trade area because it:** - (a) Allows tariffs between member countries - (b) Establishes a common external tariff for non-members - (c) Applies only to services - (d) Imposes import quotas on all goods **Answer:** (b) Establishes a common external tariff for non-members 27. **Which of the following agreements deals with cross-border investments?** - (a) TRIPS - (b) TBT - (c) TRIMs - (d) GATS **Answer:** (c) TRIMs 28. **In a preferential trade agreement, member countries:** - (a) Impose the same tariffs as non-members - (b) Reduce trade barriers for each other only - (c) Apply high tariffs to non-member countries - (d) Have no external trade barriers **Answer:** (b) Reduce trade barriers for each other only 29. **The WTO’s Agreement on Agriculture includes which commitment?** - (a) Export subsidies for all agricultural goods - (b) Reduction of domestic support for farmers - (c) Complete elimination of tariffs on food products - (d) Increase in import quotas on agricultural goods **Answer:** (b) Reduction of domestic support for farmers 30. **The Agreement on Anti-Dumping allows countries to:** - (a) Increase exports by lowering prices - (b) Impose duties on imports sold below fair market value - (c) Eliminate all tariffs on certain goods - (d) Restrict domestic production of certain goods **Answer:** (b) Impose duties on imports sold below fair market value 31. **The main objective of WTO’s “National Treatment” principle is to:** - (a) Prevent imports altogether - (b) Treat foreign goods the same as domestic goods - (c) Impose tariffs on all foreign products - (d) Promote exports **Answer:** (b) Treat foreign goods the same as domestic goods 32. **Which of the following is a major goal of the WTO?** - (a) Ensuring trade restrictions remain high - (b) Promoting international free trade and competition - (c) Limiting access to global markets - (d) Supporting only developed countries **Answer:** (b) Promoting international free trade and competition 33. **An economic and monetary union involves:** - (a) A free trade area only - (b) A common currency among members - (c) No external trade agreements - (d) Different currencies for each member country **Answer:** (b) A common currency among members 34. **The WTO's Ministerial Conference meets:** - (a) Annually - (b) Every two years - (c) Quarterly - (d) Every five years **Answer:** (b) Every two years 35. **The WTO Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS) mandates:** - (a) Free trade for all countries - (b) Uniform intellectual property protection standards - (c) Different IP laws for each country - (d) No IP protection for developing countries **Answer:** (b) Uniform intellectual property protection standards 36. **The WTO principle of 'transparency' requires member countries to:** - (a) Keep trade policies secret - (b) Publicly disclose trade policies and practices - (c) Have identical trade policies - (d) Eliminate tariffs on all goods **Answer:** (b) Publicly disclose trade policies and practices 37. **One of the WTO's objectives in dispute settlement is to:** - (a) Resolve trade disputes peacefully - (b) Impose sanctions on non-members - (c) Regulate global tariffs - (d) Control member states' import quotas **Answer:** (a) Resolve trade disputes peacefully 38. **Under the WTO's Market Access commitment, member countries agree to:** - (a) Allow unrestricted imports - (b) Set maximum tariff levels on imported goods - (c) Ban certain goods from other countries - (d) Only trade with specific countries **Answer:** (b) Set maximum tariff levels on imported goods 39. **GATS, or the General Agreement on Trade in Services, governs trade in:** - (a) Agricultural goods - (b) Intellectual property - (c) Services - (d) Manufactured products **Answer:** (c) Services 40. **The Agreement on Pre-shipment Inspection (PSI) aims to:** - (a) Ensure high tariffs on all imports - (b) Allow for inspection of goods before shipping - (c) Eliminate export taxes - (d) Control intellectual property trade **Answer:** (b) Allow for inspection of goods before shipping 41. **Which of the following agreements aims to harmonize customs valuation?** - (a) Anti-Dumping Agreement - (b) Customs Valuation Agreement - (c) TRIMs Agreement - (d) Agreement on Subsidies **Answer:** (b) Customs Valuation Agreement 42. **A significant aspect of the Doha Round is:** - (a) Reducing tariffs on agricultural products - (b) Restricting intellectual property rights - (c) Eliminating all forms of trade - (d) Blocking services trade agreements **Answer:** (a) Reducing tariffs on agricultural products 43. **The term “dumping” in international trade refers to:** - (a) Exporting goods at prices lower than domestic market prices - (b) Importing goods illegally - (c) Increasing domestic prices - (d) Imposing excessive tariffs **Answer:** (a) Exporting goods at prices lower than domestic market prices 44. **WTO members are expected to follow which key principle in reducing tariffs?** - (a) National Treatment - (b) Progressive Liberalization - (c) Quota System - (d) Non-Discrimination **Answer:** (b) Progressive Liberalization 45. **The WTO aims to promote fair competition by:** - (a) Allowing tariffs as the only form of protection - (b) Supporting MFN and anti-dumping measures - (c) Limiting access to agricultural products - (d) Increasing subsidies **Answer:** (b) Supporting MFN and anti-dumping measures 46. **A plurilateral agreement within the WTO:** - (a) Includes all WTO members - (b) Involves only specific countries with shared interests - (c) Bans all tariffs for members - (d) Imposes global trade restrictions **Answer:** (b) Involves only specific countries with shared interests 47. **Trade facilitation in the WTO context means:** - (a) Making trade faster, cheaper, and more predictable - (b) Increasing tariffs on imports - (c) Eliminating all customs procedures - (d) Restricting trade with non-members **Answer:** (a) Making trade faster, cheaper

What is Electric Force? Electric force is just one of many types of forces in the world of physics. Forces are how and why things move, and can be explained by Newton's Laws of Motion. On the smallest scale, electric force is the resulting interaction between two charged particles. These charges can be either positive or negative. Larger objects can be charged by having an abundance of either of these particles, and therefore can create an electric force on a larger scale. Electric force is the reason why hair will sometimes stand up on its own and is also why we have electricity, allowing us to live in the modern world with lights and technology. Even out in nature electric force is present, as electric force causes lightning to strike. Electric force is fundamental to our everyday way of living. Reviewing Newton's Laws of Motion Newton's Laws of motion are the basic principles or ground rules that are applied all across physics. They describe how objects move and can be used to describe the interaction of charges. They are the following: An object in motion will stay in motion unless an external force is applied The force exerted on an object is equal to the mass times the acceleration of the object. ( ) Every force has an equal and opposite force Newton's laws explain how and why charged particles move. Since there is a force involved (e.g. electric force), particles will move around, which is explained by the first law. The second law describes how acceleration of charges can be calculated once the electric force is known. The third law explains how attractive and repulsive forces between charged objects are equal and opposite. Electric Force Examples and Types of Charge As previously mentioned, there are only two types of charges; positive and negative. Two like charges will repel (or move away from) each other, and two opposite charges will attract (or move towards) each other. In other words, two positive or two negative charges will repel, while a positive and a negative charge will attract. Opposite charges will attract while like charges will repel. Attraction versus Repelling Forces Notice how the forces acting upon each other are equal and opposite, as Newton's third law states. Both charges are exerting forces onto each other. Charges in Atoms An atom is made up of three types of particles; protons, neutrons, and electrons. Protons have a positive charge, neutrons have no charge, and electrons have a negative charge. There are no positive or negative charges smaller than protons and electrons. Objects on a larger scale result in an overall positive or negative charged due to an uneven distribution of protons to electrons. An atom consisting of more protons than electrons would be considered positive, and an atom with more electrons than protons would be considered negative. Protons are held close to the nucleus and are tightly bound to an atom, so it's difficult for protons to escape an atom. Electrons, on the other hand, are much further away from the nucleus of an atom. This makes it much easier for them to be removed from an atom. Electrons can leave or join atoms, making them positive or negative depending on the amount of protons. Similarly, for the bigger picture, overall materials and objects with more electrons than protons would be considered negative, and vice versa. Electric Force Examples Hair standing up: When hair is brushed, the hairbrush can strip electrons from hair strands, resulting in the hair being positively charged. This addition of electrons to the hairbrush in turn makes the hairbrush negatively charged. Since the hair is now positively charged, and like forces repel, hair strands will move away from each other, resulting in the hair standing up. Current electricity: All of our everyday technology is powered through current electricity, which is the consistent flow of electrons through conductive materials. This flow is caused by the electric force, as the electrons flow from a negative source to a positive source. Lightning: During a storm, it is common for an abundance of electrons to build up on the bottom of a cloud, making that part of the cloud negatively charged. Positive charges in the ground start to gather on the surface or even on tall objects such as trees as they are attracted towards the negatively charged undersides of clouds. Lightning strikes as a result of these charges becoming extremely built up. Lightning is caused by electric force Lightning Electric Force Equation: Coulomb's Law The magnitude of the electric force, or the amount of force in which objects repel or attract, depends on the distance between the two charged objects and the amount of charge each object carries. The electric force is stronger the closer together the two charges are, and weaker as the two charges move apart. Electric force is also stronger with more charge, and weaker with less charge. This effect on electric force is predictable, and is known as Coulomb's Law. It can be calculated using a mathematical equation, and the resulting magnitude of electric force is measured in Newtons. Coulomb's Law Electric force can be calculated using the following equation known as Coulomb's Law: In this equation, F is the electric force measured in newtons, K is a constant known as the electrostatic constant, and are charges one and two measured in coulombs, and is the radial distance in meters between the two charges. Since the distance is squared and on the denominator, the electric force drops off exponentially as charges move away from each other. This means that the Electric force is inversely proportional to distance. As charges move away from each other, the electric force between them gets smaller and smaller, until the force is negligible. The amount of charges are in the numerator of this equation, making the magnitude of the force larger with more charge. This means that the force is directly proportional to the amount of charge. When the charges are smaller, the amount of force will be smaller. When there is a lot of charge, the force will be much greater. When calculating the electric force using Coulomb's law, the resulting answer only gives the magnitude of the force and not the direction. In order to know the direction, you must know the types of charges. Once again, like forces repel, and unlike forces attract. It helps to draw a visual representation, or a free-body diagram, of the charges and forces acting upon them in order to understand the resulting force direction. Electric Field versus Electric Force An electric field is a direct result of an electric force. Its pure definition is electric force per unit charge, and can be thought of as a mapping of the force vectors. An electric field is present anytime there is an electric force. Therefore, when there are two or more charged particles, there is a surrounding electric field. The direction of the electric field is the direction a positive charge would flow if it were placed within the field. The electric field moves out from a positive charge and goes into a negative charge. Particles with unlike charges move towards each other, and their corresponding electric field lines move out from the positive charge and into the negative charge. The strength of the force at any given point can be seen through the spacing of the electric field lines. The electric force is strongest where the electric field lines are closest together, and weaker as these lines move apart. Like Coulomb's law expresses, electric field lines show how the electric force is strongest with a minimum distance between the two charges. Unlike charges will result in a repelling force, and the resulting electric field is a visual representation of this effect. Electric fields of two positive charges have the electric field moving out away from both of them. As with two negative charges, the field lines move in towards each negative. Lesson Summary An electric force is created when there are two or more charged particles or objects. These charges can be either positive or negative. Like charges will attract (move towards each other) while unlike charges will repel (move away from each other). As Newton's third law suggests, the forces acting upon each other are both equal and opposite. Electrons and protons within an atom are the two smallest types of charges there are. Electrons carry a negative charge while protons carry a positive charge. Electrons can be easily removed or added to atoms, making the overall charge positive or negative. Objects with more electrons than protons are negatively charged. Electric force is strengthened with increased charge and a shorter distance between the charges. This effect is known as Coulomb's law and can be calculated with the Coulomb's law equation. The magnitude of the force is measured in Newtons, and the direction can be determined by knowing whether the charges are attracting or repelling each other. An electric field is present wherever there is an electric force. The direction of this electric field is the direction a positive charge would flow if it where to be dropped in the field, which is from the positive to the negative.

Related quizzes

Related quizzes