Loading...

third conditioanl with regrets and results in the present
Quiz by Daniela Lemus
Customize this quiz to suit your class
Instantly translate to 100+ languages
Tag the questions with any skills you have. Your dashboard will track each student's mastery of each skill.
Give this quiz to my class
Second and third conditional with superheroes
Contact with the Americas In 1001, Viking sailors led by Leif Erikson reached the eastern tip of North America. Archaeologists have found evidence of the Viking settlement of Vinland in present-day Newfoundland, Canada. The Vikings did not stay in Vinland long and no one is sure why they left. However, Viking stories describe fierce battles with Skraelings, the Viking name for the Inuit. Evidence suggests that Asians continued to cross the Bering Sea into North America after the last ice age ended. Some scholars believe that ancient seafarers from Polynesia may have traveled to the Americas using their knowledge of the stars and winds. Modern Polynesians have sailed canoes thousands of miles in this way. Still others think that fishing boats from China and Japan blew off course and landed on the western coast of North or South America. Perhaps such voyages occurred. If so, they were long forgotten. Before 1492, the peoples of Asia and Europe had no knowledge of the Americas and their remarkable civilizations. The Voyages of Columbus Portuguese sailors had pioneered new routes around Africa toward Asia in the late 1400s. Spain, too, wanted a share of the riches. King Ferdinand and Queen Isabella hoped to keep their rival, Portugal, from controlling trade with India, China, and Japan. They agreed to finance a voyage of exploration by Christopher Columbus. Columbus, an Italian sea captain, planned to reach the East Indies by sailing west across the Atlantic. Finding a sea route straight to Asia would give the Spanish direct access to the silks, spices, and precious metals of Asia. The spice trade was a major cause for European exploration and a reason the Spanish rulers supported Columbus’s voyage. They also wanted wealth from any source. “Get gold,” King Ferdinand said to Columbus. “Humanely if possible, but at all hazards—get gold.” Crossing the Atlantic In August 1492, Columbus set out with three ships and about 90 sailors. As captain, he commanded the largest vessel, the Santa María. The other ships were the Niña and the Pinta. After a brief stop at the Canary Islands, the little fleet continued west into unknown seas. Fair winds sped them along, but a month passed without the sight of land. Some sailors began to grumble. They had never been away from land for so long and feared being lost at sea. Still, Columbus sailed on. On October 7, sailors saw flocks of birds flying southwest. Columbus changed course to follow the birds. A few days later, crew members spotted tree branches and flowers floating in the water. At 2 a.m. on October 12, the lookout on the Pinta spotted white cliffs shining in the moonlight. “Tierra! Tierra!” he shouted. “Land! Land!” At dawn, Columbus rowed ashore and planted the banner of Spain. He was convinced that he had reached the East Indies in Asia. He called the people he found there “Indians.” In fact, he had reached islands off the coasts of North America and South America in the Caribbean Sea. These islands later became known as the West Indies. For three months, Columbus explored the West Indies. To his delight, he found signs of gold on the islands. Eager to report his success, he returned to Spain. Columbus Claims Lands for Spain In Spain, Columbus presented Queen Isabella and King Ferdinand with gifts of pink pearls and brilliantly colored parrots. Columbus brought with him many things that Europeans had never seen before: tobacco, pineapples, and hammocks used for sleeping. Columbus also described the “Indians” he had met, the Taino (ty noh). The Taino, he promised, could easily be converted to Christianity and could also be used as slaves. The Spanish monarchs were impressed. They gave Columbus the title Admiral of the Ocean Sea. They also agreed to finance future voyages. The promise of great wealth, and the chance to spread Christianity, gave them a reason to explore further. Columbus made three more voyages across the Atlantic. In 1493, he founded the first Spanish colony in the Americas, Santo Domingo, on an island he called Hispaniola (present-day Haiti and the Dominican Republic). A colony is an area settled and ruled by the government of a distant land. Columbus also explored present-day Cuba and Jamaica. He sailed along the coasts of Central America and northern South America. He claimed all of these lands for Queen Isabella of Spain. Columbus proved to be a better explorer than governor. During his third expedition, settlers on Hispaniola complained of his harsh rule. Queen Isabella appointed an investigator, who sent Columbus back to Spain in chains. In the end, the queen pardoned Columbus, but he never regained the honors he had won earlier. He died in 1506, still convinced that he had reached Asia. The Impact of Columbus’s Voyages Columbus has long been honored as the bold sea captain who “discovered America.” Today, we recognize that American Indians had discovered and settled these lands long before 1492. We also recognize that Columbus and the Europeans who followed him treated the ancient inhabitants of the Americas brutally. Still, Columbus’s voyages did change history. They marked the beginning of lasting contact among the peoples of Europe, Africa, and the Americas. For a great many American Indians, contact had tragic results. Columbus and those who followed were convinced that European culture was superior to that of the Indians. The Spanish claimed Taino lands and forced the Taino to work in gold mines, on ranches, or in Spanish households. Many Taino died from harsh conditions or European diseases. The Taino population was wiped out. Still, the voyages of Columbus signaled a turning point for the Americas. A turning point is a moment in history that marks a decisive change. Curious Europeans saw the new lands as a place where they could settle, trade, and grow rich. Spanish Exploration Continues After the voyages of Columbus, the Spanish explored and settled other Caribbean islands that Columbus had found. They sought gold, land for crops, people to enslave, and converts to Christianity for the Spanish crown. By 1511, they had conquered Puerto Rico, Jamaica, and Cuba. They also explored the eastern coasts of North America and South America in search of a western route to Asia. In 1513, Vasco Núñez de Balboa (bal boh uh) crossed the Isthmus of Panama. American Indians had told him that a large body of water lay to the west. With a party of Spanish soldiers and Indians, Balboa reached the Pacific Ocean and claimed the ocean for Spain. The Spanish had no idea how wide the Pacific was until a sea captain named Ferdinand Magellan (muh jel un) sailed across it. The expedition—made up of five ships and about 250 crew members—left Spain in 1519. Fifteen months later, it cut through the stormy southern tip of South America by way of what is now known as the Strait of Magellan and entered the Pacific Ocean. Crossing the vast Pacific, the sailors ran out of food: Primary Source “We remained 3 months and 20 days without taking in provisions or other refreshments and ate only old biscuit reduced to powder, full of grubs and stinking from the dirt which rats had made on it. We drank water that was yellow and stinking.” —Antonio Pigafetta, The Diary of Antonio Pigafetta Magellan himself was killed in a battle with the local people of the Philippine Islands off the coast of Asia. In 1522, only one ship and 18 sailors returned to Spain. They were the first people to circumnavigate, or sail completely around, the world. In doing so, they had found an all-water western route to Asia. Europeans became aware of the true size of the Earth. How Did the Columbian Exchange Affect the Rest of the World? The encounter between the peoples of the Eastern and Western Hemispheres sparked a global exchange of goods and ideas. Because it started with the voyages of Columbus, this transfer is known as the Columbian Exchange. The Columbian Exchange refers to a biological and cultural exchange of animals, plants, human populations, diseases, food, government, technology, the arts, and languages. The exchange went in both directions. Europeans learned much from American Indians. At the same time, Europeans contributed in many ways to the culture of the Americas. This exchange also brought about many modifications, or changes, to the physical environment of the Americas, with both positive and negative results. Changing Environments Europeans introduced domestic animals such as chickens from Europe and Africa. European pigs, cattle, and horses often escaped into the wild and multiplied rapidly. Forests and grasslands were converted to pastures. As horses spread through what would become the United States, Indians learned to ride them and used them to carry heavy loads. Plants from Europe and Africa changed the way American Indians lived. The first bananas came from the Canary Islands. By 1520, one Spaniard reported that banana trees had spread “so greatly that it is marvelous to see the great abundance of them.” Oranges, lemons, and figs were also new to the Americas. In North America, explorers also brought such plants as bluegrass, the daisy, and the dandelion. These plants spread quickly in American soil and modified American grasslands. Tragically, Europeans also brought new diseases, such as smallpox and influenza. American Indians had no resistance to these diseases. Historians estimate that within 75 years, diseases from Europe had killed almost 90 percent of the people in the Caribbean Islands and in Mexico. American Indian Influences on Europe, Africa and Asia American Indians introduced Europeans to valuable food crops such as corn, potatoes, sweet potatoes, beans, tomatoes, manioc, squash, peanuts, pineapples, and blueberries. Today, almost half the world’s food crops come from plants that were first grown in the Americas. Europeans carried the new foods with them as they sailed around the world. Everywhere, people’s diets changed and populations increased. In South Asia, people used American hot peppers and chilies to spice stews. Chinese peasants began growing corn and sweet potatoes. Italians made sauces from tomatoes. People in West Africa grew manioc and corn. European settlers often adopted American Indian skills. In the North, Indians showed Europeans how to use snowshoes and trap beavers and other fur-bearing animals. European explorers learned how to paddle Indian canoes. Some leaders studied American Indian political structures. In the 1700s, Benjamin Franklin admired the Iroquois League and urged American colonists to unite in a similar way. Positive and Negative Consequences Through the Columbian Exchange, Europeans and American Indians modified their environments and gained new resources and skills. At the same time, warfare and disease killed many on both sides. Europeans viewed expansion positively. They gained great wealth, explored trade routes, and spread Christianity. Yet their farming, mining, and diseases took a toll on the physical environment and left many American Indians dead. Despite these negatives, the Columbian Exchange shaped the modern world, including what would become the United States.
Multiple Choice Questions A6. You’ve hired a third-party to gather information about your company’s servers and data. The third-party will not have direct access to your internal network but can gather information from any other source. Which of the following would BEST describe this approach? ❍ A. Backdoor testing ❍ B. Passive footprinting ❍ C. OS fingerprinting ❍ D. Partially known environment A7. Which of these protocols use TLS to provide secure communication? (Select TWO) ❍ A. HTTPS ❍ B. SSH ❍ C. FTPS ❍ D. SNMPv2 ❍ E. DNSSEC ❍ F. SRTP A8. Which of these threat actors would be MOST likely to attack systems for direct financial gain? ❍ A. Organized crime ❍ B. Hacktivist ❍ C. Nation state ❍ D. Competitor A9. A security incident has occurred on a file server. Which of the following data sources should be gathered to address file storage volatility? (Select TWO) ❍ A. Partition data ❍ B. Kernel statistics ❍ C. ROM data ❍ D. Temporary file systems ❍ E. Process table Quick Answer: 33 The Details: 43 Quick Answer: 33 The Details: 44 Quick Answer: 33 The Details: 45 Quick Answer: 33 The Details: 46 6 Practice Exam A - Questions A10. An IPS at your company has found a sharp increase in traffic from all-in-one printers. After researching, your security team has found a vulnerability associated with these devices that allows the device to be remotely controlled by a third-party. Which category would BEST describe these devices? ❍ A. IoT ❍ B. RTOS ❍ C. MFD ❍ D. SoC A11. Which of the following standards provides information on privacy and managing PII? ❍ A. ISO 31000 ❍ B. ISO 27002 ❍ C. ISO 27701 ❍ D. ISO 27001 A12. Elizabeth, a security administrator, is concerned about the potential for data exfiltration using external storage drives. Which of the following would be the BEST way to prevent this method of data exfiltration? ❍ A. Create an operating system security policy to prevent the use of removable media ❍ B. Monitor removable media usage in host-based firewall logs ❍ C. Only allow applications that do not use removable media ❍ D. Define a removable media block rule in the UTM Quick Answer: 33 The Details: 47 Quick Answer: 33 The Details: 48 Quick Answer: 33 The Details: 49 Practice Exam A - Questions 7 A13. A CISO (Chief Information Security Officer) would like to decrease the response time when addressing security incidents. Unfortunately, the company does not have the budget to hire additional security engineers. Which of the following would assist the CISO with this requirement? ❍ A. ISO 27701 ❍ B. PKI ❍ C. IaaS ❍ D. SOAR A14. An insurance company has created a set of policies to handle data breaches. The security team has been given this set of requirements based on these policies: • Access records from all devices must be saved and archived • Any data access outside of normal working hours must be immediately reported • Data access must only occur inside of the country • Access logs and audit reports must be created from a single database Which of the following should be implemented by the security team to meet these requirements? (Select THREE) ❍ A. Restrict login access by IP address and GPS location ❍ B. Require government-issued identification during the onboarding process ❍ C. Add additional password complexity for accounts that access data ❍ D. Conduct monthly permission auditing ❍ E. Consolidate all logs on a SIEM ❍ F. Archive the encryption keys of all disabled accounts ❍ G. Enable time-of-day restrictions on the authentication server Quick Answer: 33 The Details: 50 Quick Answer: 33 The Details: 51 8 Practice Exam A - Questions A15. Rodney, a security engineer, is viewing this record from the firewall logs: UTC 04/05/2018 03:09:15809 AV Gateway Alert 136.127.92.171 80 -> 10.16.10.14 60818 Gateway Anti-Virus Alert: XPACK.A_7854 (Trojan) blocked. Which of the following can be observed from this log information? ❍ A. The victim's IP address is 136.127.92.171 ❍ B. A download was blocked from a web server ❍ C. A botnet DDoS attack was blocked ❍ D. The Trojan was blocked, but the file was not A16. A user connects to a third-party website and receives this message: Your connection is not private. NET::ERR_CERT_INVALID Which of the following attacks would be the MOST likely reason for this message? ❍ A. Brute force ❍ B. DoS ❍ C. On-path ❍ D. Disassociation A17. Which of the following would be the BEST way to provide a website login using existing credentials from a third-party site? ❍ A. Federation ❍ B. 802.1X ❍ C. PEAP ❍ D. EAP-FAST Quick Answer: 33 The Details: 53 Quick Answer: 33 The Details: 54 Quick Answer: 33 The Details: 55 Practice Exam A - Questions 9 A18. A system administrator, Daniel, is working on a contract that will specify a minimum required uptime for a set of Internet-facing firewalls. Daniel needs to know how often the firewall hardware is expected to fail between repairs. Which of the following would BEST describe this information? ❍ A. MTBF ❍ B. RTO ❍ C. MTTR ❍ D. MTTF A19. An attacker calls into a company’s help desk and pretends to be the director of the company’s manufacturing department. The attacker states that they have forgotten their password and they need to have the password reset quickly for an important meeting. What kind of attack would BEST describe this phone call? ❍ A. Social engineering ❍ B. Tailgating ❍ C. Watering hole ❍ D. On-path A20. A security administrator has been using EAP-FAST wireless authentication since the migration from WEP to WPA2. The company’s network team now needs to support additional authentication protocols inside of an encrypted tunnel. Which of the following would meet the network team’s requirements? ❍ A. EAP-TLS ❍ B. PEAP ❍ C. EAP-TTLS ❍ D. EAP-MSCHAPv2 Quick Answer: 33 The Details: 56 Quick Answer: 33 The Details: 57 Quick Answer: 33 The Details: 58 10 Practice Exam A - Questions A21. Which of the following would be commonly provided by a CASB? (Select TWO) ❍ A. List of all internal Windows devices that have not installed the latest security patches ❍ B. List of applications in use ❍ C. Centralized log storage facility ❍ D. List of network outages for the previous month ❍ E. Verification of encrypted data transfers ❍ F. VPN connectivity for remote users A22. The embedded OS in a company’s time clock appliance is configured to reset the file system and reboot when a file system error occurs. On one of the time clocks, this file system error occurs during the startup process and causes the system to constantly reboot. Which of the following BEST describes this issue? ❍ A. DLL injection ❍ B. Resource exhaustion ❍ C. Race condition ❍ D. Weak configuration A23. A recent audit has found that existing password policies do not include any restrictions on password attempts, and users are not required to periodically change their passwords. Which of the following would correct these policy issues? (Select TWO) ❍ A. Password complexity ❍ B. Password expiration ❍ C. Password history ❍ D. Password lockout ❍ E. Password recovery Quick Answer: 33 The Details: 59 Quick Answer: 33 The Details: 60 Quick Answer: 33 The Details: 61 Practice Exam A - Questions 11 A24. What kind of security control is associated with a login banner? ❍ A. Preventive ❍ B. Deterrent ❍ C. Corrective ❍ D. Detective ❍ E. Compensating ❍ F. Physical A25. A security team has been provided with a noncredentialed vulnerability scan report created by a thirdparty. Which of the following would they expect to see on this report? ❍ A. A summary of all files with invalid group assignments ❍ B. A list of all unpatched operating system files ❍ C. The version of web server software in use ❍ D. A list of local user accounts A26. A business manager is documenting a set of steps for processing orders if the primary Internet connection fails. Which of these would BEST describe these steps? ❍ A. Communication plan ❍ B. Continuity of operations ❍ C. Stakeholder management ❍ D. Tabletop exercise A27. A security administrator is concerned about data exfiltration resulting from the use of malicious phone charging stations. Which of the following would be the BEST way to protect against this threat? ❍ A. USB data blocker ❍ B. Personal firewall ❍ C. MFA ❍ D. FDE Quick Answer: 33 The Details: 62 Quick Answer: 33 The Details: 63 Quick Answer: 33 The Details: 64 Quick Answer: 33 The Details: 65 12 Practice Exam A - Questions A28. A company would like to protect the data stored on laptops used in the field. Which of the following would be the BEST choice for this requirement? ❍ A. MAC ❍ B. SED ❍ C. CASB ❍ D. SOAR A29. A file server has a full backup performed each Monday at 1 AM. Incremental backups are performed at 1 AM on Tuesday, Wednesday, Thursday, and Friday. The system administrator needs to perform a full recovery of the file server on Thursday afternoon. How many backup sets would be required to complete the recovery? ❍ A. 2 ❍ B. 3 ❍ C. 4 ❍ D. 1
Etymology explains the origin of the word itself. Example: Using the example term “arbitration”: Arbitration comes from the Latin judicium which means “judgment”. 2. History discusses the history of the term, its use, and controversies associated with it. Example: The use of arbitration as third-party mediation dates from the 1630s. 3. Cause and Effect discusses how the situation came about and what effects it may have. Example: An arbitration clause is considered to be ambiguous when the parties do not express clearly, that in case of conflict, the method to use to settle the disagreements will be arbitration. Hence, parties are compelled to refrain from signing confusing agreements to arbitrate, because the general rule is that arbitration is prompted out of the contract, and if there is not an explicit arbitration clause within the contract it would not be an agreement to arbitrate. 4. Description lists and defines the term. Example: Arbitration is the process of solving an argument between people by helping them to agree to an acceptable solution. It is the formal process of having an outside person, chosen by both sides to a disagreement to end the disagreement. 5. Principles of Operation discusses how something functions, including any special materials or conditions required. Example: Arbitration is conducted by a trained arbiter who sets down the rules that the parties must abide by. The object of arbitration is to obtain a fair resolution of disputes by an impartial third party without unnecessary expense or delay. Parties should be free to agree on how their disputes are resolved, subject only to such safeguards as are necessary for the public interest. Courts should not interfere. 5 6. Classification shows how the topic fits into a larger category. Example: Arbitration is one of the alternatives to going into a formal court to settle disputes. 7. Contrast shows how the topic differs from others in the same class. Example: In an arbitration proceeding, no lawyers are present. The main difference between arbitration and litigation law is that the court is involved in the case of litigation, as it is a lawsuit, whereas, in arbitration, a settlement between the parties is done outside of court. 8. Comparison shows how the topic is similar to others in the class. Example: As with lawsuits or other court proceedings, the decision in an arbitration proceeding is legally binding on the parties. 9. Analogy explains and compares two dissimilar topics, where the second is familiar to the audience. Example: An arbiter is like a referee–he or she listens to both sides and decides as to who is at fault, without the intervention of outside parties. 10.Examples represent other things because they have all the main qualities or characteristics that the thing they represent also have. Examples: Arbitration was used to settle the dispute between the labor union and management. Two people who are divorcing cannot agree on terms and allow a third party to come in to help them negotiate
Singapore, a city-state that imports most of its food from other countries, started experimenting with vertical farming to scale up local food production as early as 2009. Having limited land but a large population, Singapore has expanded upward by building high-rise “farm walls,” which allow plants to grow up, rather than across the land. With a population of 23 million, Taiwan should follow Singapore’s example and develop vertical farming because this farming method can address issues such as limited land, water, and agricultural workers. 2 First, the rainwater-driven rotary system in vertical farms makes better use of land and, therefore, may help deal with the farmland issue in Taiwan. Taiwan has lost a lot of agricultural land to industrial and domestic use. This land issue can be addressed by the rotary system, which allows farmers to move racks of plants—one by one—as high as nine meters up in the air to get enough sunlight. Each vertical farm in Singapore has more than 20 racks of rotating plant-growing containers, providing an efficient way to make the most of limited land space. 3 Second, aside from the efficient use of land, the rotary system helps save water, which can prevent a lack of water during water rationing. Despite the fact that Taiwan has a lot more annual rainfall than the world average, much of it quickly flows down steep mountains into the sea, which makes collecting rainwater difficult. In vertical farms, plants are watered by recycled rainwater precisely where they need to be when the racks are rotated down to the micro-sprinklers. Singapore’s urban farming has proved that this sustainable irrigation method allows plants to be grown with only 5% of the water used in traditional agriculture. 4 Third, the operation of vertical farms relies greatly on machines and thus may ease the problem of having a declining number of agricultural workers. Low pay, long hours, and tough working conditions on traditional farms mean most young people would rather choose other careers, which results in an age gap in agriculture with many more older workers than younger ones. Such a negative impact could be reduced by the highly-computerized work on vertical farms. Mostly operated by machines, the work on vertical farms is lighter. As a result, fewer workers are needed on vertical farms. 5 Given these points, vertical farming appears to be the perfect solution for Taiwan, and we are technologically prepared for this new farming method. One biotechnology company in Taiwan has been working with a Danish partner since 2020, and they have successfully run a vertical farm in Copenhagen. If we can build more vertical farms in Taiwan, many agricultural issues can be dealt with, and city citizens may be able to start growing and harvesting food sustainably at the touch of a button.
President Xi Jinping, who is also general secretary of the Communist Party of China Central Committee and chairman of the Central Military Commission, visits Luoyang Bearing Group Co on Monday afternoon during his inspection of Luoyang, Henan province. During the visit, Xi called for continuous efforts to make the manufacturing industry even stronger to advance Chinese modernization. YAN YAN/XINHUA President Xi Jinping has stressed the importance of keeping businesses, employment, the market and expectations stable in the face of a complex international environment, saying that China will respond to various uncertainties with the certainty of its high-quality development. Xi, who is also general secretary of the Communist Party of China Central Committee and chairman of the Central Military Commission, made the remarks on Tuesday as he wrapped up a two-day fact-finding trip to Central China's Henan province. Speaking to provincial Party and government officials at a work briefing on Tuesday in Zhengzhou, the provincial capital, Xi said that high-quality development is essential to Chinese modernization. Faced with the complex external environment, it is necessary to firm up confidence, unwaveringly manage China's own affairs well, and steadfastly expand high-level opening-up, he said. He also urged Henan, one of the country's economic powerhouses, to further consolidate the foundation of its real economy, and promote the development of new quality productive forces suited to local conditions and led by technological innovation, in order to enhance the capacity of its modern industrial system to support high-quality development. When visiting Luoyang Bearing Group Co in the city of Luoyang on Monday, Xi said: "China has always adhered to the path of developing the real economy. From the past reliance on imported matches, soap and iron, to now becoming the world's largest manufacturing country with the most complete industrial categories, we have taken the right path." As a traditional manufacturing enterprise specializing in bearings, Luoyang Bearing Group's products are widely used in fields such as aerospace, construction machinery, wind power generation, rail transit, port machinery and ships. After learning about the company's efforts to accelerate the development of advanced manufacturing, Xi said that China must continue to strengthen the manufacturing sector, adhere to the principles of building self-reliance and strength, and master core technologies in key fields. "The hope is placed on you," he told the on-site workers. He also called for efforts to strengthen collaboration between industries, universities and research institutes, and cultivate a large number of high-quality talent. Despite internal challenges and increasing external shocks, China's manufacturing industry has withstood pressure and maintained stable growth. In April, the manufacturing sector saw its value-added output climb 6.6 percent year-on-year, with that of equipment manufacturing and high-tech manufacturing up 9.8 percent and 10 percent, respectively, according to data released by the National Bureau of Statistics on Monday. Advanced manufacturing is the high ground in global industrial competition and the main battlefield for technological innovation. Xi has repeatedly emphasized the need to upgrade the country's modernized industrial system, supported by advanced manufacturing. In a resolution adopted at the third plenary session of the 20th CPC Central Committee in July last year, it was clearly stated that China will move faster to advance new industrialization, promote the growth and expansion of advanced manufacturing clusters, and make the manufacturing sector higher-end, smarter and more eco-friendly. On Monday, Xi also visited the White Horse Temple, the first Buddhist temple in China, and the Longmen Grottoes, a UNESCO World Heritage site. Contact the writers at mojingxi@chinadaily.com.cn
Can you create an evaluation using this information PHONETICS VS. PHONOLOGY Whereas phonetics is the study of sounds that occur in language, phonology is the study of how these sounds are organized and how they function in language. It uses the classifications of sounds derived from phonetics to describe and analyze how sounds occur in speech. STRUCTURALIST PHONEMICS STRUCTURALIST PHONEMICS As linguists began to study sounds in fine detail, they recognized increasingly complex aspects of phonetic organization. For example, the sound /p/ appears in different varieties in English. STRUCTURALIST PHONEMICS One of the varieties of /p/ is indicated by [ph]. This sound is produced with an accompanying puff of air called aspiration, as in the words “pill,” and “peace.” Another sound, indicated by [p•], is produced when there is little or no aspiration; this sound occurs in a word like “spill.” A third major variety for the /p/ sound is the unreleased [p– ], which may occur at the end of a word like “stop.” To deal with these variations for the /p/ sound, the structuralists suggested the existence of an abstract unit which they termed a phoneme. STRUCTURALIST PHONEMICS A phoneme was defined by the structuralists as an abstract phonological unit that represents a class of real sounds, termed the allophones of a phoneme. The phoneme /p/ in English, then, is represented by the allophones [ph], [p•], and [p– ]. STRUCTURALISTS: MINIMAL PAIRS How do we know what these abstract units of sound called phonemes are? In order to find the phonemes of a language, the structuralists developed the concept of the minimal pair, defined as any two words that: a) Contain the same number of segments b) Differ in meaning c) Exhibit only one phonetic difference. STRUCTURALISTS: MINIMAL PAIRS In practical terms, phonemes distinguish meanings; and a phoneme can also be defined as the smallest meaning-distinguishing unit of sound. For instance, the words “pin” /pɪn/ and “bin” /bɪn/ mean different things, and the only one difference in these words occurs in the initial sounds. STRUCTURALISTS: MINIMAL PAIRS By using the concept of a minimal pair, we can determine that the three variations of the /p/ sound do not represent three phonemes. Certainly, it is possible to pronounce the word cap with either an aspirated [ph ] or unreleased [p– ]; however, the two forms [kæph ] and [kæp– ] are not a minimal pair, even though they involve different sounds, because they are identical in meaning. STRUCTURALISTS: FREE VARIATION The two forms [kæph ] and [kæp– ] are, therefore, said to exhibit free variation: that is, the pronunciation may vary without signifying a change in meaning. In other words, we may conclude that the unreleased [p– ] and the aspirated [ph ] are not representations of different phonemes in English; they are, in fact, allophones of one phoneme, /p/. STRUCTURALISTS: COMPLEMENTARY DISTRIBUTION When phonemes have more than one allophone in a language, the allophones are said to be in complementary distribution. Complementary distribution means that the allophones of a phoneme occur in different phonetic environments (that is, with different sounds surrounding them). TRANSFORMATIONAL- GENERATIVE PHONOLOGY TRANSFORMATIONAL-GENERATIVE PHONOLOGY Transformational-generative phonology is a relatively recent development in linguistic theory. Chomsky launched Transformational-Generative Grammar in 1957, but the earliest studies within this framework were largely concerned with syntax. A decade later, the first comprehensive transformational-generative treatment of English phonology appeared: Chomsky and Halle’s The Sound Pattern of English (1968). TRANSFORMATIONAL-GENERATIVE PHONOLOGY Transformational-generative phonologists strongly oppose the structuralists’ phonemic level. They replace this level by a series of rules that directly relate underlying representations to observed phonetic representations. The central mechanisms in transformational-generative phonology, then, are underlying representations and phonological rules. PHONOLOGICAL RULES A rule is an operational statement in which some linguistic entity is modified, resulting in a new linguistic entity. Rules may add elements, remove elements, or change elements. By using phonological rules, linguists attempt to demonstrate that there is order in linguistic phenomena and that linguistic patterns are systematic. PHONOLOGICAL DERIVATION A phonological derivation is an operation that begins with an underlying representation and, through the application of a set of specific rules, yields the actual sound the speaker produces. The representation of a phonological rule has the following general appearance. /A/ → [B] / C “A” changes to “B” under condition “C” PHONOLOGICAL RULE – EXAMPLE In most Southern dialects, the word ten is pronounced like the word tin. This is not an isolated fact, for den is pronounced like din and Ben is pronounced like bin, and so on. This very general fact can be represented by the phonological rule: /ɛ/ → [I] / ___ [n] den /dɛn/ → /dIn/ Ben /bɛn/ → /bIn/ ten /tɛn/ → /tIn/ /ɛ/ → [I] / ___ [n] - high - low - tense + front + high - tense + front + sonorant + anterior + coronal - continuant NOTATIONAL DEVICES IN PHONOLOGICAL RULES The statement of phonological rules can be complex, and linguists have developed several notational devices for writing them. Often, the following symbols will be necessary for stating the conditions under which rules apply: # indicates a word boundary + indicates an intraword boundary $ indicates a syllable boundary UNDERLYING REPRESENTATIONS AND RELATED ISSUES The transformational-generative description of phonology relates underlying representations to phonetic representations by rules. This can be represented in a simple example: In English, there are certain pairs of words like sign / signature, and malign / malignant that exhibit a regular alternation in their phonetic representations: [g] is present in the second member of the pairs but absent in the first member. UNDERLYING REPRESENTATIONS AND RELATED ISSUES To explain the relatedness of words such as sign / signature, we could claim that the underlying representation of the segment in all such pairs is /g/ and that a rule operates to delete /g/ before syllable-final nasals. Thus, the rule “/g/ is deleted before syllable-final nasal” would appear formally as: + voice - anterior →∅ ____ [+ nasal] $ - coronal UNDERLYING REPRESENTATIONS AND RELATED ISSUES On the left-hand side of the arrow, we place the features needed to uniquely specify /g/ among the consonants; that is, no other consonant has the features [+ voice], [- anterior], and [- coronal]. The symbols → mean that the sound /g/ changes to nothing or more properly “/g/ is deleted.” The horizontal line following the slash mark refers to the position of /g/ - namely, before a segment that is [+nasal]. Finally, this [+nasal] segment occurs before a syllable boundary, as indicated by $. A less formal way of writing this rule would be: /g/ → / _ [+nasal] $ Notice that this rule also helps describe such alternations as phlegm/phlegmatic and paradigm/paradigmatic. Application Activity: Think of other words in which this rule can be applied. Write the sound segments to prove /g/ is deleted. Another example is the process through which the prefix meaning “not” is added to words. This prefix alternates among the forms /Im/, /In/, and /Iŋ/, depending on the point of articulation of the initial segment of the following word. -If the segment begins in the extreme front part of the mouth (labials), the form is /Im/, as in improper. -If the segment begins in the extreme back part of the mouth (velars), the form is /Iŋ/, as in incomplete. -If the segment begins in the mid-region of the mouth (all other sounds), the form is /In/, as in indecent. *Exceptions:Words beginning with /r/ or /l/. Analyze the Word “in + complete,” for example. /n/ → [ŋ] / __ [k] - continuant - continuant - continuant + sonorant → + sonorant - sonorant + anterior - anterior - strident + coronal - coronal - coronal + tense THE VELAR SOFTENING RULE Still another example of alternation in English is found in pairs of words like “electric / electricity,” in which the segments /k/ and /s/ alternate. /k/ changes to [s] only before non- low, front vowels. THE VELAR SOFTENING RULE /k/ → [s] / __ - continuant + continuant - strident → - sonorant V - anterior + anterior - low - coronal + coronal - back
Here is a transcript of a video about Narrative Writing. Generate 25 questions. Intro to Narrative Writing What is Narrative Writing? You today, I want to introduce you to the basics of narrative writing. Narrative writing is writing that tells a story. It can be real or imagined, that is, nonfiction or fiction. It has a beginning, middle, and end. That is, it includes the basic elements of a plot exposition, rising action, conflict, climax, falling action, and resolution. And it's full of interesting details. The author's purpose in writing a narrative is to entertain the reader. There are three main types of narrative writing. The first is a personal narrative when a writer shares a true story from his or her own life. We could also say this type of narrative is autobiographical. The second type of narrative is biographical when a writer shares a true story from another person's life. The third type of narrative is fictional. When a writer tells an invented story, short stories, and novels are fictional narratives. The Process of Writing a Narrative While we could add to this list, there are five important parts of a narrative that I especially want you to remember as you write your own narrative. These parts of a narrative include setting, characters, plot, point of view, and dialogue. The first part of a narrative is the setting , where, and when the narrative takes place. The setting affects both the plot and characters in your narrative, so it's important to spend some time brainstorming where, when, and in what conditions your story takes place. The second part of a narrative is the characters , the people, animals or creatures involved in a story. Remember that your story must have a protagonist, the character facing the problem, and an antagonist the character or force causing the problem. Take some time while planning your narrative to focus on your characters beyond the characters names and roles they play in the story. Think about whether you'd like them to be flat with very few character traits or round with many character traits. Also think about which characters in your story will remain static or unchanged, and which characters will be dynamic, undergoing an important change in your narrative. The third part of a narrative is the plot , the sequence of events in a narrative. Take some time to think carefully through your story's plot. How will it begin and how will it end? What conflicts will your characters encounter? What is the climax or turning point of your story? How will the problems be solved? Creating a storyboard or labeling a plot diagram are both good tools for planning your story's plot. The fourth part of a narrative is the point of view , which is the perspective from which a narrative is told. You can choose to write your narrative in first person, writing a personal narrative from your own point of view, or you can choose a character in a fictional narrative to tell your story. Another option is to write your narrative in the third person point of view, telling the story from the perspective of an unseen narrator that is not a character in the story. Finally, the fifth part of a narrative is dialogue. The words the characters speak in your story dialogue can establish the setting, show characterization, foreshadow events, or advance the action in a narrative. Dialogue brings your narrative to life. It's important to review how to punctuate dialogue, following grammatical rules for using quotation marks, commas, and other N marks such as periods and question marks. As you begin writing your narrative, I'll help you break down each step of the process. But hopefully this introduction gives you a basic understanding of what narrative writing is, and hopefully it sparks some ideas for you to begin planning your own narrative.