
SMAW 10 3RD QUARTER EXAM
Quiz by Genald Aldamar
Tag the questions with any skills you have. Your dashboard will track each student's mastery of each skill.
What is the main purpose of preparing edges in a butt joint?
Which welding position corresponds to 1G?
The term “root pass” refers to:
What is the recommended electrode angle in a flat butt weld?
Proper tacking during weld joint preparation ensures:
Which indicates correct penetration in a butt weld?
A 2G butt weld is performed with the plate:
Excessive travel speed causes:
What welding defect occurs when the arc burns through the root?
The“heat-affected zone” is the:
Horizontal butt welding requires the electrode to be:
In SMAW for butt welding, slag must be removed between passes to:
Which factor MOST affects penetration?
In groove welding, the root gap controls:
Which is a sign of correct travel speed?
When welding a V-groove butt joint, a welder should:
A butt weld where the plates are only touched at the surface is called:
Which tool is used to check alignment before welding?
Horizontal welding requires controlling molten metal because:
The final bead applied to complete the weld is called:
Weld bead uniformity refers to:
A uniform ripple pattern indicates:
Which inspection method evaluates bead appearance?
What tool is used to measure bead size accurately?
Even and equally spaced ripples show:
A properly uniform weld bead should be:
Excessive reinforcement means the bead is:
A groove melted along the weld toe is called:
Overlap occurs when:
Ripple patterns form due to:
A properly applied weld should show:
The WPS guides weld quality by:
Fillet weld uniformity is best checked:
Undercut weakens a welded joint because it:
An acceptable weld bead has:
Which technique improves bead appearance?
Ripple size mainly depends on:
Too fast welding travel causes the bead to:
Proper arc length keeps:
A smooth weld toe indicates:
One purpose of weld bead uniformity is to:
Visual inspection requires:
Inconsistently spaced ripples show:
Spatter around the weld indicates:
Uniform beads generally appear:
Weld gauge checks:
A checklist during inspection should NOT include:
Poor fusion happens when:
Welding standards help prevent:
A visually acceptable weld bead has: